iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 61936-1:2021/oprAA:2024

(Amendment)

Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC

Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC

European common modification to EN 61936-1

Starkstromanlagen mit Nennwechselspannungen über 1 kV AC und 1,5 kV DC - Teil 1: Wechselstrom

Installations électriques de puissance de tension supérieure à 1 kV en courant alternatif et 1,5 kV en courant continu - Partie 1: Courant alternatif

Elektroenergetski postroji za izmenične napetosti nad 1 kV in enosmerne napetosti nad 1,5 kV - 1. del: Izmenična napetost

General Information

Status
Not Published
Public Enquiry End Date
29-Mar-2024
ICS
29.020 - Electrical engineering in general
29.080.01 - Electrical insulation in general
29.240.01 - Power transmission and distribution networks in general
Technical Committee
IVNI - High voltage power installations
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
14-Dec-2023
Due Date
02-May-2024
Ref Project
EN IEC 61936-1:2021/prAA:2024 - Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC

Relations

Amends
SIST EN IEC 61936-1:2021 - Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC
Effective Date
20-Sep-2022

Buy Standard

EN IEC 61936-1:2021/oprAA:2024 - BARVEEN IEC 61936-1:2021/oprAA:2024 - BARVE
PreviousNext
Draft
EN IEC 61936-1:2021/oprAA:2024 - BARVE
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61936-1:2021/oprAA:2024
01-marec-2024
Elektroenergetski postroji za izmenične napetosti nad 1 kV in enosmerne
napetosti nad 1,5 kV - 1. del: Izmenična napetost
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC
Starkstromanlagen mit Nennwechselspannungen über 1 kV AC und 1,5 kV DC - Teil 1:
Wechselstrom
Installations électriques de puissance de tension supérieure à 1 kV en courant alternatif
et 1,5 kV en courant continu - Partie 1: Courant alternatif
Ta slovenski standard je istoveten z: EN IEC 61936-1:2021/prAA:2024
ICS:
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
SIST EN IEC 61936-1:2021/oprAA:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61936-1:2021/oprAA:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 61936-1:2021/oprAA:2024


EUROPEAN STANDARD DRAFT
EN IEC 61936-1:2021
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAA
February 2024
ICS 29.080.01; 29.020 -
English Version
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1:
AC
Installations électriques de puissance de tension supérieure Starkstromanlagen mit Nennwechselspannungen über 1 kV
à 1 kV en courant alternatif et 1,5 kV en courant continu - AC und 1,5 kV DC - Teil 1: Wechselstrom
Partie 1: Courant alternatif
This draft amendment prAA, if approved, will modify the European Standard EN IEC 61936-1:2021; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-04-26.

It has been drawn up by CLC/TC 99X.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 76621 Ref. No. EN IEC 61936-1:2021/prAA:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61936-1:2021/oprAA:2024
EN IEC 61936-1:2021/prAA:2024 (E)
Contents Page
3 European foreword . 3
4 1 Modification to Clause 2, “Normative references” . 4
5 2 Modification to Clause 3, “Terms and definitions” . 4
6 3 Modifications to Clause 4, “Fundamental requirements” . 4
7 4 Modifications to Clause 8, “Safety measures” . 4
8 5 Modifications to Clause 10, “Earthing systems” . 4
9 6 Modification to Annex C, “Permissible touch voltage according IEEE 80” . 4
10 7 Modification to Annex D, “Earthing system design flow chart” . 5
11 8 Modification to Annex F, “Considerations of design for safe working” . 5
12 9 Deletion of Annex G, “List of notes concerning particular conditions in certain countries” . 5
13 10 Addition of annexes .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61936-2:2023(Main)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
EN IEC 61936-2:2023

This part of IEC 61936 provides, in a convenient form, requirements for the design and the
erection of DC installations in systems with nominal voltages above 1,5 kV DC, so as to provide
safety and proper functioning for the use intended.
For the purpose of interpreting this document, a DC installation is considered to be one of the
following:
a) A converter station or DC switching station;
b) one (or more) DC generating or storage unit(s), such as solar farms or battery storage units,
located on a single site, the DC installation includes DC equipment and cables with all
associated power electronics, controlgear, switchgear and all electrical auxiliary systems.
Connections between DC generating or storage units located on different sites are excluded;
c) DC installation erected on offshore facilities for the purpose of generation, transmission,
distribution and/or storage of electricity; or
d) DC transition station (between overhead lines and underground cable or between different
sections of underground cables).
This International Standard does not apply to the design and erection of any of the following:
– overhead and underground lines between separate installations;
– electric railways;
– mining equipment and installations;
– installations on ships according to IEC 60092 series and offshore units according to
IEC 61892 series, which are used in the offshore petroleum industry for drilling, processing
and storage purposes;
– electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
– test sites;
– medical equipment, e.g. medical X-ray equipment;
– valve hall or converter hall.
This document does not apply to the requirements for carrying out live working on electrical
installations.
This document does not apply to the design of factory-built, type-tested thyristor valves, VSC
valves and switchgear for which separate IEC standards exist.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61936-1:2021(Main)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC
EN IEC 61936-1:2021

This part of IEC 61936 provides requirements for the design and the erection of electrical power
installations in systems with nominal voltages exceeding 1 kV AC and nominal frequency up to
and including 60 Hz, so as to provide safety and proper functioning for the use intended.
For the purpose of interpreting this document, an electrical power installation is considered to
be one of the following:
a) substation, including substation for railway power supply;
b) electrical power installations on mast, pole and tower, switchgear and/or transformers
located outside a closed electrical operating area;
c) one (or more) power station(s) located on a single site, the electrical power installation
includes generators and transformers with all associated switchgear and all electrical
auxiliary systems. Connections between generating stations located on different sites are
excluded;
d) the electrical system of a factory, industrial plant or other industrial, agricultural, commercial
or public premises;
e) electrical power installations on offshore facilities for the purpose of generation,
transmission, distribution and/or storage of electricity;
f) transition towers/poles (between overhead lines and underground lines).
The electrical power installation includes, among others, the following equipment:
– rotating electrical machines;
– switchgear;
– transformers and reactors;
– converters;
– cables;
– wiring systems;
– batteries;
– capacitors;
– earthing systems;
– buildings and fences which are part of a closed electrical operating area;
– associated protection, control and auxiliary systems;
– large air core reactor.
NOTE 1 In general, equipment standards take precedence over the requirements of this document.
This document does not apply to the design and erection of any of the following:
– overhead and underground lines between separate electrical power installations;
– electrified railway tracks and rolling stock;
– mining equipment and installations;
fluorescent lamp installations;
– installations on ships according to IEC 60092 (all parts) and offshore units according to
IEC 61892 (all parts), which are used in the offshore petroleum industry for drilling,
processing and storage purposes;
– electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
– test sites;
– medical equipment, e.g. medical X-ray equipment.
This document does not apply to the design of prefabricated, type-tested switchgear and high
voltage/low voltage prefabricated substation, for which separate IEC standards exist.
NOTE 2 The scope of this document does not include the requirements for carrying out live working on electrical
power installations.
NOTE 3 The scope of this document considers safety requirements for HV installations and the influences of HV
installations on LV installations. For electrical installations up to 1 kV, IEC 60364 (all parts) applies.

  • Standard
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61936-2:2023(Main)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
EN IEC 61936-2:2023

This part of IEC 61936 provides, in a convenient form, requirements for the design and the
erection of DC installations in systems with nominal voltages above 1,5 kV DC, so as to provide
safety and proper functioning for the use intended.
For the purpose of interpreting this document, a DC installation is considered to be one of the
following:
a) A converter station or DC switching station;
b) one (or more) DC generating or storage unit(s), such as solar farms or battery storage units,
located on a single site, the DC installation includes DC equipment and cables with all
associated power electronics, controlgear, switchgear and all electrical auxiliary systems.
Connections between DC generating or storage units located on different sites are excluded;
c) DC installation erected on offshore facilities for the purpose of generation, transmission,
distribution and/or storage of electricity; or
d) DC transition station (between overhead lines and underground cable or between different
sections of underground cables).
This International Standard does not apply to the design and erection of any of the following:
– overhead and underground lines between separate installations;
– electric railways;
– mining equipment and installations;
– installations on ships according to IEC 60092 series and offshore units according to
IEC 61892 series, which are used in the offshore petroleum industry for drilling, processing
and storage purposes;
– electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
– test sites;
– medical equipment, e.g. medical X-ray equipment;
– valve hall or converter hall.
This document does not apply to the requirements for carrying out live working on electrical
installations.
This document does not apply to the design of factory-built, type-tested thyristor valves, VSC
valves and switchgear for which separate IEC standards exist.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61936-1:2021(Main)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC
EN IEC 61936-1:2021

This part of IEC 61936 provides requirements for the design and the erection of electrical power
installations in systems with nominal voltages exceeding 1 kV AC and nominal frequency up to
and including 60 Hz, so as to provide safety and proper functioning for the use intended.
For the purpose of interpreting this document, an electrical power installation is considered to
be one of the following:
a) substation, including substation for railway power supply;
b) electrical power installations on mast, pole and tower, switchgear and/or transformers
located outside a closed electrical operating area;
c) one (or more) power station(s) located on a single site, the electrical power installation
includes generators and transformers with all associated switchgear and all electrical
auxiliary systems. Connections between generating stations located on different sites are
excluded;
d) the electrical system of a factory, industrial plant or other industrial, agricultural, commercial
or public premises;
e) electrical power installations on offshore facilities for the purpose of generation,
transmission, distribution and/or storage of electricity;
f) transition towers/poles (between overhead lines and underground lines).
The electrical power installation includes, among others, the following equipment:
– rotating electrical machines;
– switchgear;
– transformers and reactors;
– converters;
– cables;
– wiring systems;
– batteries;
– capacitors;
– earthing systems;
– buildings and fences which are part of a closed electrical operating area;
– associated protection, control and auxiliary systems;
– large air core reactor.
NOTE 1 In general, equipment standards take precedence over the requirements of this document.
This document does not apply to the design and erection of any of the following:
– overhead and underground lines between separate electrical power installations;
– electrified railway tracks and rolling stock;
– mining equipment and installations;
fluorescent lamp installations;
– installations on ships according to IEC 60092 (all parts) and offshore units according to
IEC 61892 (all parts), which are used in the offshore petroleum industry for drilling,
processing and storage purposes;
– electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
– test sites;
– medical equipment, e.g. medical X-ray equipment.
This document does not apply to the design of prefabricated, type-tested switchgear and high
voltage/low voltage prefabricated substation, for which separate IEC standards exist.
NOTE 2 The scope of this document does not include the requirements for carrying out live working on electrical
power installations.
NOTE 3 The scope of this document considers safety requirements for HV installations and the influences of HV
installations on LV installations. For electrical installations up to 1 kV, IEC 60364 (all parts) applies.

  • Standard
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6284:2024(Main)
Technical product documentation - Construction documentation - Indication of limit deviations (ISO 6284:2023)
EN ISO 6284:2024

This document specifies methods for the indication of limit deviations on construction documents.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60567:2024(Main)
Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases - Guidance
EN IEC 60567:2024

IEC 60567:2023 deals with the techniques for sampling free gases from gas-collecting relays from power transformers. Three methods of sampling free gases are described. The techniques for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors are no longer covered by this document, but are instead described in IEC 60475:2022, 4.2. Before analysing the gases dissolved in oil, they are first extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping) and the last one by partition of gases between the oil sample and a small volume of the carrier gas (headspace). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50716:2024(Main)
Railway Applications - Requirements for software development
EN 50716:2023

1.1 This European Standard specifies the process and technical requirements for the development of software for programmable electronic systems for use in control, command for signaling applications and any on-board of rolling stock.
This European Standard is not intended to be applied in the area of electric traction power supply (fixed installation) or for power supply and control of conventional applications, e.g. station power supply for offices, shops etc. These applications are covered typically by standards for energy distribution and/or non-railway sectors and/or local legal frameworks.
For railway related fixed installations (electric traction power control and supply) the EN 50562 is applicable.
1.2 This European Standard is applicable exclusively to software and the interaction between software and the system of which it is part.
1.3 Intentionally left blank
1.4 This European Standard applies to all software used in railway systems, including
- application programming,
- operating systems,
- support tools,
- firmware.
Application programming comprises high level programming, low level programming and special purpose programming (for example: Programmable logic controller ladder logic).
1.5 This European Standard also addresses the use of pre-existing software and tools. Such software may be used, if the specific requirements in 7.3.4.7 and 6.5.4.16 on pre-existing software and for tools in 6.7 are fulfilled.
1.6 Software developed according to any version of EN 50128 or EN 50657 will be considered as compliant and not subject to the requirements on pre-existing software.
1.7 This European Standard considers that modern application design often makes use of software that is suitable as a basis for various applications. Such software is then configured by application data for producing the executable software for the application.
1.8 Entry intentionally left empty.
1.9 This European Standard is not intended to be retrospective. It therefore applies primarily to new developments and only applies in its entirety to existing systems if these are subjected to major modifications. For minor changes, only 9.2 applies.
The assessor has to analyse the evidences provided in the software documentation to confirm whether the determination of the nature and scope of software changes is adequate. However, application of this European Standard during upgrades and maintenance of existing software is highly recommended.
1.10 For the development of User Programmable Integrated Circuits (e.g. FPGA & CPLD) guidance is provided in EN 50129:2018 Annex F for safety related functions and in EN 50155:2017 for non-safety related functions. Software running on soft-cores of User Programmable Integrated Circuits is within the scope of this European Standard.
[...]

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13259:2024(Main)
Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes
CEN/TS 13259:2023

This document refers to manual blowpipes and stationary machine blowpipes with free burning flames for heat treatment of work pieces. These blowpipes are, due to their type of construction, designed for special applications and do not fall under the scope of EN ISO 5172:2006  and EN ISO 9012:2011.
This document does not apply to manual and machine cutting blowpipes according to EN ISO 5172:20061.
This document contains technical regulations, specifications and tests.
Blowpipes are intended for gaseous fuels in connection with oxygen, compressed air or aspirated air.
Flow rates are not expressly limited and depend on the thermal process to be performed.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9012:2024(Main)
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2023)
EN ISO 9012:2023
  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/ASTM 52939:2024(Main)
Additive Manufacturing for construction - Qualification principles - Structural and infrastructure elements (ISO/ASTM 52939:2023)
EN ISO/ASTM 52939:2023

This  document  defines  the  requirements  for  building  and  construction  projects  in  which  additive  manufacturing (AM) techniques are used. The requirements are independent of the material and printing method used.
This   document   specifies   the   criteria   for   additive   manufacturing   processes   and   quality-relevant characteristics and factors along the AM system operations and defines activities and sequences within an AM cell (Additive manufacturing site) and project.
This standard applies to all additive manufacturing technologies in building and construction (load bearing &  non-load  bearing),  structural  and  infrastructure  building  elements  for  residential  and  commercial  applications and follows an approach oriented to the manufacturing process..
Local H&S standards and environmental aspects are not covered in this standard but should be applied. Design approvals, material property characterisation and testing are are not covered in this standard.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day