Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)

Industriearmaturen - Klappen aus Thermoplasten - Änderung 1 (ISO 16136:2006/Amd 1:2019)

Diese Internationale Norm legt die Anforderungen an die Konstruktion, Funktionsmerkmale und die Herstellung von Klappen aus Thermoplasten zum Absperren und Regeln fest sowie deren Anschluss an das Rohrleitungssystem, Gehäusewerkstoffe und Druck/Temperatur-Zuordnungen zwischen – 40 °C und + 120 °C, für eine Lebensdauer von 25 Jahren. Sie legt auch die entsprechenden Prüfungen fest.
Diese Internationale Norm gilt für hand- und kraftbetätigte Armaturen, die in industrielle Rohrleitungssysteme eingebaut werden, unabhängig vom Einsatzbereich und dem zu befördernden Medium.
ANMERKUNG 1      Industrielle Rohrleitungssysteme umfassen auch Rohrleitungen für Wasserversorgung für allgemeine Zwecke, Entwässerung und Entsorgung.
ANMERKUNG 2      Rohrleitungssysteme für Wasser für den menschlichen Gebrauch können besonderen Anforderungen unterliegen.
Diese Internationale Norm erstreckt sich auf die folgenden DN-Bereiche:
DN 15, DN 20, DN 25, DN 32, DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350, DN 400, DN 450, DN 500 und DN 600
sowie auf die folgenden PN- und Class-Bereiche:
PN 6, PN 10, PN 16 und Class 150.

Robinetterie industrielle - Robinets à papillon en matériaux thermoplastiques - Amendement 1 (ISO 16136:2006/Amd 1:2019)

Industrijski ventili - Zaporne lopute iz plastomernih materialov - Dopolnilo A1 (ISO 16136:2006/Amd 1:2019)

General Information

Status
Published
Public Enquiry End Date
19-Sep-2018
Publication Date
09-Sep-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Aug-2019
Due Date
02-Nov-2019
Completion Date
10-Sep-2019

RELATIONS

Buy Standard

Amendment
SIST EN ISO 16136:2006/A1:2019
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Amendment
SIST EN ISO 16136:2006/oprA1:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 16136:2006/A1:2019
01-oktober-2019

Industrijski ventili - Zaporne lopute iz plastomernih materialov - Dopolnilo A1 (ISO

16136:2006/Amd 1:2019)

Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO

16136:2006/Amd 1:2019)
Industriearmaturen - Klappen aus Thermoplasten - Änderung 1 (ISO 16136:2006/Amd
1:2019)
Robinetterie industrielle - Robinets à papillon en matériaux thermoplastiques -
Amendement 1 (ISO 16136:2006/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 16136:2006/A1:2019
ICS:
23.060.99 Drugi ventili Other valves
SIST EN ISO 16136:2006/A1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16136:2006/A1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 16136:2006/A1:2019
EN ISO 16136:2006/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 23.060.99
English Version
Industrial valves - Butterfly valves of thermoplastics
materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)

Robinetterie industrielle - Robinets à papillon en Industriearmaturen - Klappen aus Thermoplasten -

matériaux thermoplastiques - Amendement 1 (ISO Änderung 1 (ISO 16136:2006/Amd 1:2019)

16136:2006/Amd 1:2019)

This amendment A1 modifies the European Standard EN ISO 16136:2006; it was approved by CEN on 21 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16136:2006/A1:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16136:2006/A1:2019
EN ISO 16136:2006/A1:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Directive 2014/68/EU (Pressure Equipment Directive) aimed to be

covered................................................................................................................................................................ 4

---------------------- Page: 4 ----------------------
SIST EN ISO 16136:2006/A1:2019
EN ISO 16136:2006/A1:2019 (E)
European foreword

This document (EN ISO 16136:2006/A1:2019) has been prepared by Technical Committee ISO/TC 138

"Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical Committee

CEN/TC 69 “Industrial valves” the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by February 2020, and conflicting national standards

shall be withdrawn at the latest by February 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this

document.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 16136:2006/Amd 1:2019 has been approved by CEN as EN ISO 16136:2006/A1:2019

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 16136:2006/A1:2019
EN ISO 16136:2006/A1:2019 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2014/68/EU (Pressure Equipment Directive)
aimed to be covered

This European Standard has been prepared under a Commission’s standardization request M/071 to

provide one voluntary means of conforming to essential requirements of Directive 2014/68/EU of the

European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the

Member States relating to the making available on the market of pressure equipment.

Once this standard is cited in the Official Journal of the European Union under that Directive,

compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of

the scope of this standard, a presumption of conformity with the corresponding essential requirements

of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of
Directive 2014/68/EU
Essential Requirements of Clause(s)/subclause(s) of Remarks/Notes
Directive 2014/68/EU this EN
2.2.1 4.3 Design loading factors
2.2.2 4.6.1; 5.2.1; 5.2.2; 5.2.3; 5.2.5 Design for adequate strength
2.7 4.8.1 Wear
3.1.5 4.7.1 Traceability
3.2.2 4.6.1; 4.6.3 Strength proof test
3.4 4.8.3 Operating instructions
4.1, 4.2 a) 4.2; 4.3 Materials for pressurised parts

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

Standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 6 ----------------------
SIST EN ISO 16136:2006/A1:2019
INTERNATIONAL ISO
STANDARD 16136
First edition
2006-03-15
AMENDMENT 1
2019-07
Industrial valves — Butterfly valves of
thermoplastics materials
AMENDMENT 1
Robinetterie industrielle — Robinets à papillon en matériaux
thermoplastiques
AMENDEMENT 1
Reference number
ISO 16136:2006/Amd.1:2019(E)
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 16136:2006/A1:2019
ISO 16136:2006/Amd.1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16136:2006/A1:2019
ISO 16136:2006/Amd.1:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www .iso .org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for

the transport of fluids, Subcommittee SC 7, Valves and auxiliary equipment of plastics materials.

Any feedback or questions on this document should
...

SLOVENSKI STANDARD
SIST EN ISO 16136:2006/oprA1:2018
01-september-2018

Industrijski ventili - Zaporne lopute iz plastomernih materialov - Dopolnilo A1 (ISO

16136:2006/DAM 1:2018)

Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO

16136:2006/DAM 1:2018)
Industriearmaturen - Klappen aus Thermoplasten - Änderung 1 (ISO 16136:2006/DAM
1:2018)
Robinetterie industrielle - Robinets à papillon en matériaux thermoplastiques -
Amendement 1 (ISO 16136:2006/DAM 1:2018)
Ta slovenski standard je istoveten z: EN ISO 16136:2006/prA1
ICS:
23.060.99 Drugi ventili Other valves
SIST EN ISO 16136:2006/oprA1:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 16136:2006/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 16136:2006/oprA1:2018
DRAFT AMENDMENT
ISO 16136:2006/DAM 1
ISO/TC 138/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2018-07-02 2018-09-24
Industrial valves — Butterfly valves of thermoplastics
materials
AMENDMENT 1
Robinetterie industrielle — Robinets à papillon en matériaux thermoplastiques
AMENDEMENT 1
ICS: 23.060.99
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 16136:2006/DAM 1:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
SIST EN ISO 16136:2006/oprA1:2018
ISO 16136:2006/DAM 1:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 16136:2006/oprA1:2018
ISO 16136:2006/DAM 1:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following

URL: www .iso .org/iso/foreword .html.

This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for

the transport of fluids, Subcommittee SC 7, Valves and auxiliary equipment of plastics materials.

© ISO 2018 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST EN ISO 16136:2006/oprA1:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 16136:2006/oprA1:2018
ISO 16136:2006/DAM 1:2018(E)
Industrial valves — Butterfly valves of thermoplastics
materials
AMENDMENT 1
Clause 1
Add the following note at the end of Clause 1:
NOTE 3 Different DN and/or PN may be declared by the manufacturer.
Clause 2
Date all the normative references.

Delete the reference to EN 736-1:1995 and EN 736-2:1997, to be moved to the bibliography.

Delete the following references.

ISO 12092:2000, Fittings, valves and other piping system components made of unplasticized poly(vinyl

chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and

acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure —

Test method

EN 558-1:1995, Industrial valves — Face-to-face and centre-to-face dimensions of metal valves for use in

flanged pipe systems — Part 1: PN-designated valves

EN 558-2:1995, Industrial valves — Face-to-face and centre-to-face dimensions of metal valves for use in

flanged pipe systems — Part 2: Class-designated valves
EN 736-3:1999, Valves - Terminology - Part 3: Definition of terms
Add the following reference.

ISO 1167-1:2006, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination

of the resistance to internal pressure — Part 1: General method

EN 558:2017, Industrial valves — Face-to-face and centre-to-face dimensions of metal valves for use in

flanged pipe systems — PN and Class designated valves"
EN 736-3:2008, Valves - Terminology - Part 3: Definition of terms
Replace the reference to ISO 898-1:1999 by the following:

"ISO 898-1:2013, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts,

screws and studs with specified property classes — Coarse thread and fine pitch thread

Replace the reference to ISO 12162:1995 by the following:

ISO 12162:2009, Thermoplastics materials for pipes and fittings for pressure applications — Classification,

designation and design coefficient
Replace the reference to ISO 15494:2004 by the following:

ISO 15494:2015, Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE),

polyethylene of raised temperature resistance (P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.