SIST EN 17110:2018
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
This document covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere.
It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document.
The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Be- und Entlüftungsventil für Gassammelleitungen
Dieses Dokument behandelt das Be- und Entlüftungsventil für Gassammelleitungen, das zur kontrollierten Entlüftung der Gassammelleitung in die Atmosphäre dient.
Dieses Dokument legt die Leistungsanforderungen und die entscheidenden Maße des Be- und Entlüftungsventil für Gassammelleitungen fest. Es sind außerdem die Prüfungen festgelegt, um die Übereinstimmung der Ausrüstung mit den Anforderungen dieser Norm zu bestätigen.
Die in diesem Dokument beschriebene Bedienungsausrüstung ist für flüssige Erdölerzeugnisse und andere gefährliche Güter der Klasse 3 des ADR [1] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff), und die nicht als giftig oder ätzend eingestuft sind.
Citernes destinées au transport de matières dangereuses - Équipement de service - Évent de transfert pour collecteur de vapeurs
Le présent document couvre l’évent de transfert pour collecteur de vapeurs assurant la fonction d’aération régulée du collecteur de vapeurs dans l'atmosphère.
Il spécifie les exigences de performances et les dimensions critiques de l’évent de transfert pour collecteur de vapeurs. Il spécifie également les essais nécessaires pour vérifier la conformité de l’équipement au présent document.
L’équipement de service spécifié dans le présent document convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR[1] dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous classification des produits toxiques ou corrosifs.
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Oddušni ventil za zbiralnik plinske faze
Ta dokument obravnava oddušni ventil za zbiralnik plinske faze, ki se uporablja za nadzirano razbremenitev tlaka zbiralnika plinske faze v atmosfero.
Določa zahteve glede zmogljivosti in kritične mere oddušnega ventila za zbiralnik plinske faze. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem dokumentom.
Oprema, opredeljena v tem dokumentu, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR [1], katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Oddušni ventil za zbiralnik plinske fazeTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Be- und Entlüftungsventil für GassammelleitungenCiternes destinées au transport de matières dangereuses - Équipement de service - Évent de transfert pour collecteur de vapeursTanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve23.060.99Drugi ventiliOther valves23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 17110:2018SIST EN 17110:2018en,fr,de01-november-2018SIST EN 17110:2018SLOVENSKI
STANDARD
SIST EN 17110:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 17110
August
t r s z ICS
s uä u r râ
t uä r t rä t râ
t uä r x rä { { English Version
Tanks for transport of dangerous goods æ Service equipment for tanks æ Vapour manifold vent valve Citernes destinées au transport de matières dangereuses æ Équipement de service æ Évent de transfert pour collecteur de vapeurs
Tanks für die Beförderung gefährlicher Güter æ Bedienungsausrüstung von Tanks æ Beæ und Entlüftungsventil für Gassammelleitungen This European Standard was approved by CEN on
t u April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s y s s rã t r s z ESIST EN 17110:2018
EN 17110:2018 (E) 2 Contents Page European foreword . 3 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Functions . 6 5 Design characteristics . 7 5.1 General . 7 5.2 5.2. Pressure and vacuum breathing . 7 5.3 Ingress protection . 7 5.4 Flow capacity . 7 5.5 Temperature range . 7 5.6 Materials of construction . 7 5.7 Dimensional characteristics . 7 5.7.1 Maximum dimensions . 7 5.7.2 Flange connection . 8 5.8 Electrical resistance . 8 6 Tests . 8 6.1 General . 8 6.2 Production tests. 8 6.2.1 General . 8 6.2.2 Internal seat tightness test . 9 6.2.3 Operability test . 9 6.3 Type test . 9 6.3.1 General . 9 6.3.2 Shell strength test .10 6.3.3 Shell tightness test .10 6.3.4 Internal seat tightness test .10 6.3.5 Mechanical endurance test .10 7 Marking .11 8 Installation, operating and maintenance instructions .11 Bibliography .12 SIST EN 17110:2018
EN 17110:2018 (E) 3 European foreword This document (EN 17110:2018) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2019, and conflicting national standards shall be withdrawn at the latest by February 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document forms part of a coherent standards programme (i.e. Tanks for transport of liquid dangerous goods with vapour pressure not exceeding 110 kPa (absolute pressure) at 50° C and petrol - Service equipment). This standards programme comprises the following standards: EN 13081, Tanks for Transport of dangerous goods — service equipment for tanks — vapour collection adaptor and coupler EN 13082, Tanks for transport of dangerous goods — Service equipment for tanks — Vapour transfer valve EN 13083, Tanks for transport of dangerous goods — Service equipment for tanks — Adaptor for bottom loading and unloading EN 13308, Tanks for transport of dangerous goods — Service equipment for tanks — Non-pressure balanced footvalve EN 13314, Tanks for transport of dangerous goods — Service equipment for tanks — Fill hole cover EN 13315, Tanks for transport of dangerous goods — Service equipment for tanks — Gravity discharge coupler EN 13316, Tanks for transport of dangerous goods — Service equipment for tanks — Pressure balanced footvalve EN 13317, Tanks for transport of dangerous goods — Service equipment for tanks — Manhole cover assembly EN 14595, Tanks for transport of dangerous goods — Service equipment — Breather device EN 14596, Tanks for transport of dangerous goods — Service equipment for tanks — Emergency pressure relief valve EN 16249, Tanks for the transport of dangerous goods — Service equipment — Cap for the adaptor for bottom loading and unloading EN 16257, Tanks for the transport of dangerous goods — Service equipment — Footvalve sizes other than 100 mm dia. (nom) EN 16522, Tanks for transport of dangerous goods — Service equi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.