Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 (IEC 60317-29:1990/A2:2010)

This International Standard specifies the requirements of enamelled rectangular copper winding wire of class 200 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. NOTE - A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain pe rformance or application characteristics.
Class 200 is a thermal class that requires a minimum temperature index of 200 and a heat shock temperature of at least 220 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor dimensions covered by this standard is:
- width: min. 2,0 mm max. 16,0 mm;
- thickness: min. 0,80 mm max. 5,60 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 317-0-2.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 29: Flachdrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit Polyamidimid, Klasse 200 (IEC 60317-29:1990/A2:2010)

Spécifications pour types particuliers de fils de bobinage - Partie 29: Fil de section rectangulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200 (CEI 60317-29:1990/A2:2010)

Specifikacije za posebne tipe navitij - 29. del: S poliestrom ali poliesterimidom emajliran bakren vodnik pravokotnega prereza, prekrit s poliamidom, razred 200 - Dopolnilo A2 (IEC 60317-29:1990/A2:2010)

Ta mednarodni standard določa zahteve za emajliran bakren vodnik pravokotnega prereza razreda 200 z dvojnim premazom. Spodnji premaz je osnovan na poliestrski ali poliesterimidni smoli, ki se lahko spremeni, pod pogojem, da ohrani kemično identiteto prvotne smole in izpolnjuje vse zahteve za vodnik. Zgornji premaz je osnovan na poliamidni smoli. OPOMBA: Spremenjena smola je smola, ki je bila kemično spremenjena ali vsebuje enega ali več aditivov, ki izboljšujejo določene lastnosti delovanja ali uporabe.
Razred 200 je toplotni razred, ki zahteva minimalni temperaturni indeks 200 °C in temperaturo toplotnega šoka najmanj 220 °C. Temperatura v stopinjah Celzija, ki ustreza temperaturnemu indeksu, ni nujno ta, pri kateri se priporoča delovanje vodnika, saj je le-to odvisno od več dejavnikov, vključno z tipi uporabljene opreme. Razpon nominalnih premerov prevodnikov, ki jih zajema ta standard, je:
- širina: najmanj 2,0 mm, največ 16,0 mm;
- debelina: najmanj 0,80 mm, največ 5,60 mm.
Ta specifikacija vključuje vodnike stopnje 1 in 2 ter velja za celoten razpon prevodnikov. Določene kombinacije širine in debeline ter opredeljeno razmerje med širino in debelino so navedeni v IEC 317-0-2.

General Information

Status
Published
Publication Date
10-Oct-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Sep-2010
Due Date
27-Nov-2010
Completion Date
11-Oct-2010

Relations

Buy Standard

Amendment
EN 60317-29:2001/A2:2010
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-29:2001/A2:2010
01-november-2010
Specifikacije za posebne tipe navitij - 29. del: S poliestrom ali poliesterimidom
emajliran bakren vodnik pravokotnega prereza, prekrit s poliamidom, razred 200 -
Dopolnilo A2 (IEC 60317-29:1990/A2:2010)
Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide
overcoated with polyamide-imide enamelled rectangular copper wire, class 200 (IEC
60317-29:1990/A2:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 29:
Flachdrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit
Polyamidimid, Klasse 200 (IEC 60317-29:1990/A2:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 29: Fil de section
rectangulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche
polyamide-imide, classe 200 (CEI 60317-29:1990/A2:2010)
Ta slovenski standard je istoveten z: EN 60317-29:1996/A2:2010
ICS:
29.060.10 Žice Wires
SIST EN 60317-29:2001/A2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-29:2001/A2:2010

---------------------- Page: 2 ----------------------

SIST EN 60317-29:2001/A2:2010

EUROPEAN STANDARD
EN 60317-29/A2

NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM

ICS 29.060.10


English version


Specifications for particular types of winding wires -
Part 29: Polyester or polyesterimide overcoated with polyamide-imide
enamelled rectangular copper wire, class 200
(IEC 60317-29:1990/A2:2010)


Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 29: Fil de section rectangulaire Teil 29: Flachdrähte aus Kupfer,
en cuivre émaillé avec polyester lackisoliert mit Polyester
ou polyesterimide et avec surcouche oder Polyesterimid und darüber
polyamide-imide, classe 200 mit Polyamidimid, Klasse 200
(CEI 60317-29:1990/A2:2010) (IEC 60317-29:1990/A2:2010)




This amendment A2 modifies the European Standard EN 60317-29:1996; it was approved by CENELEC on
2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-29:1996/A2:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60317-29:2001/A2:2010
EN 60317-29:1996/A2:2010 - 2 -
Foreword
The text of document 55/1184/FDIS, future amendment 2 to IEC 660317-29:1990, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A2 to EN 60317-29:1996 on 2010-06-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.