SIST EN 13025-3:2006

Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml

Part 3 of EN  13025 specifies 20 l, 25 l and 30 l nominal capacity, round cylindrical and tapered removable head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions related to this range of nominal filling volumes are shown in Tables 1 and 2 of this European Standard.

Verpackungen - Feinstblechverpackungen - Teil 3: Deckelfässer mit einem Nennvolumen von 20 000 ml, 25 000 ml und 30 000 ml

Teil 3 der EN 13025 legt runde, zylindrische und konische Deckelfässer mit einem Nennvolumen von
20 000 ml, 25 000 ml und 30 000 ml und einer Dicke des Stahls oder Weißblechs von maximal 0,49 mm fest.
Die Tabellen 1 und 2 dieser Europäischen Norm enthalten die zu dieser Bandbreite an Nennfüllvolumen
empfohlenen Maße.

Emballage - Emballages métalliques légers - Partie 3: Seaux a ouverture totale d'une capacité nominale de 20 000 ml, 25 000 ml et 30 000 ml

Embalaža – Pločevinke – 3. del: Okrogle jeklene pločevinke in pločevinke iz bele pločevine s snemljivim pokrovom (široka odprtina) z nazivno prostornino 20.000 ml, 25.000 ml in 30.000 ml

General Information

• Status: Published
• Publication Date: 31-Jan-2006
• Withdrawal Date: 31-Mar-2006
• ICS: 55.120 - Cans. Tins. Tubes
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2006
• Due Date: 01-Feb-2006
• Completion Date: 01-Feb-2006
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN 13025-3:2005 - Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml

Relations

• Replaces: SIST EN 13025:2001 - Packaging - Light gauge metal packaging - Nominal filling volumes for round cylindrical and tapered general use metal containers up to 40000 ml
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13025-3:2006
01-februar-2006
1DGRPHãþD
SIST EN 13025:2001
(PEDODåD±3ORþHYLQNH±GHO2NURJOHMHNOHQHSORþHYLQNHLQSORþHYLQNHL]EHOH
SORþHYLQHVVQHPOMLYLPSRNURYRPãLURNDRGSUWLQD]QD]LYQRSURVWRUQLQR
POPOLQPO
Packaging - Light gauge metal containers - Part 3: Removable head (open head) round
steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000
ml
Verpackungen - Feinstblechverpackungen - Teil 3: Deckelfässer mit einem
Nennvolumen von 20 000 ml, 25 000 ml und 30 000 ml
Emballage - Emballages métalliques légers - Partie 3: Seaux a ouverture totale d'une
capacité nominale de 20 000 ml, 25 000 ml et 30 000 ml
Ta slovenski standard je istoveten z: EN 13025-3:2005
ICS:
55.120 3ORþHYLQNH7XEH Cans. Tins. Tubes
SIST EN 13025-3:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13025-3:2006

---------------------- Page: 2 ----------------------

SIST EN 13025-3:2006
EUROPEAN STANDARD
EN 13025-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 55.140 Supersedes EN 13025:2000
English Version
Packaging - Light gauge metal containers - Part 3: Removable
head (open head) round steel and tinplate containers with a
nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
Emballage - Emballages métalliques légers - Partie 3: Verpackungen - Feinstblechverpackungen - Teil 3:
Seaux à ouverture totale d'une capacité nominale de 20 Deckelfässer mit einem Nennvolumen von 20 000 ml, 25
000 ml, 25 000 ml et 30 000 ml 000 ml und 30 000 ml
This European Standard was approved by CEN on 12 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13025-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13025-3:2006
EN 13025-3:2005 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Dimensions.5
5 Material .5
6 Construction.5
7 Finish .5
Bibliography .8

2

---------------------- Page: 4 ----------------------

SIST EN 13025-3:2006
EN 13025-3:2005 (E)
Foreword
This European Standard (EN 13025-3:2005) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
This European Standard supersedes EN 13025:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 13025-3:2006
EN 13025-3:2005 (E)
1 Scope
Part 3 of EN 13025 specifies 20 l, 25 l and 30 l nominal capacity, round cylindrical and tapered removable
head containers with steel and tinplate thickness not exceeding 0,49 mm.
Recommended dimensions r
...