iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61669:2002

(Main)

Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids

Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids

Specifies the general requirements for test equipment designed for use in measuring the real-ear acoustical characteristics of hearing aids and describes the terminology used. The purpose of this International Standard is to ensure that measurements of real-ear acoustical characteristics of a hearing aid on a given human ear, performed with different test equipment which comply with this International Standard using methods described in ISO 12124, shall give substantially the same results.

Elektroakustik - Geräte zur Messung der Kenndaten von Hörgeräten am menschlichen Ohr

Electroacoustique - Appareillage pour la mesure des caractéristiques acoustiques des appareils de correction auditive sur l'oreille réelle

Décrit des spécifications concernant les prescriptions générales pour l'appareillage d'essai destiné à être utilisé dans la mesure des caractéristiques acoustiques des appareils de correction auditive sur une oreille réelle et rappelle la terminologie utilisée. L'objet de cette Norme internationale est de s'assurer que les mesures des caractéristiques acoustiques sur une oreille réelle d'un appareil de correction auditive, effectuées sur une oreille humaine donnée, avec différents appareillages d'essai satisfaisant à cette Norme internationale en utilisant les méthodes décrites dans l'ISO 12124 donnent sensiblement les mêmes résultats.

Electroacoustics - Equipment for the measurements of real-ear acoustical characteristics of hearing aids (IEC 61669:2001)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
16-Dec-2018
ICS
11.180.15 - Aids for deaf and hearing impaired people
17.140.50 - Electroacoustics
Technical Committee
I11 - Imaginarni 11
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Dec-2018
Due Date
09-Jan-2019
Completion Date
17-Dec-2018
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 61669:2001 - Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics of hearing aids

Relations

Replaced By
SIST EN 61669:2016 - Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
Effective Date
01-Apr-2016
Replaced By
SIST EN 61669:2016 - Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
Effective Date
07-Jun-2022

Buy Standard

EN 61669:2002EN 61669:2002
PreviousNext
Standard
EN 61669:2002
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61669:2002
01-september-2002
Electroacoustics - Equipment for the measurements of real-ear acoustical
characteristics of hearing aids (IEC 61669:2001)
Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics
of hearing aids
Elektroakustik - Geräte zur Messung der Kenndaten von Hörgeräten am menschlichen
Ohr
Electroacoustique - Appareillage pour la mesure des caractéristiques acoustiques des
appareils de correction auditive sur l'oreille réelle
Ta slovenski standard je istoveten z: EN 61669:2001
ICS:
11.180.15 3ULSRPRþNL]DJOXKHRVHEHLQ Aids for deaf and hearing
RVHEH]RNYDURVOXKD impaired people
17.140.50 Elektroakustika Electroacoustics
SIST EN 61669:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61669:2002

---------------------- Page: 2 ----------------------

SIST EN 61669:2002

---------------------- Page: 3 ----------------------

SIST EN 61669:2002

---------------------- Page: 4 ----------------------

SIST EN 61669:2002

---------------------- Page: 5 ----------------------

SIST EN 61669:2002

-----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60118-16:2022(Main)
Electroacoustics - Hearing aids - Part 16: Definition and verification of hearing aid features (IEC 60118-16:2022)
EN IEC 60118-16:2022

This part of IEC 60118 gives definitions for common hearing aid features such as noise reduction or feedback reduction, etc. Only acoustical inputs are considered. Binaural features are currently not covered in this document. In addition, measurement procedures are described to verify hearing aid features. The objective is not to evaluate the performance of features but to verify their existence and functionality.
Furthermore, definitions and procedures are kept as general as possible so that this document can be applied to various types of hearing aids, e.g. air conduction hearing aids or bone conduction hearing aids. To this end, the general definition for hearing aid of IEC 60118-0:2015 is adopted, and this document does not refer to any specific ear simulator or acoustic coupler but uses a general definition of a coupler. However, if a general view is not applicable or leads to unclear or complex wording, the situation for an air conduction hearing aid is considered, only. Nevertheless, in Clause 4, an explanation is given on how this document can be applied to hearing aids which do not use air conduction.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60118-13:2020(Main)
Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices (IEC 60118-13:2019)
EN IEC 60118-13:2020

This part of IEC 60118 covers the relevant EMC phenomena for hearing aids. Hearing aid
immunity to high frequency fields originating from digital wireless devices such as mobile
phones was identified as one of the most relevant EMC phenomena impacting hearing aids.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60118-9:2020(Main)
Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids (IEC 60118-9:2019)
EN IEC 60118-9:2019

This Standard specifies methods for the measurement of bone conduction hearing aid characteristics. The methods described will produce a suitable basis for the exchange of information or for direct comparison of the electroacoustical characteristics of bone conduction hearing aids. These methods are chosen to be practical and reproducible and are based on selected fixed parameters. The results obtained by the methods specified in this document express the performance under the conditions of measurement; however, the performance of the hearing aid under practical conditions of use will depend upon a number of factors (e.g. effective load impedance, environmental conditions, acoustical environment, etc.). This document defines methods of measurement of characteristics of bone conduction hearing aids both for - transcutaneously coupled devices measured on a mechanical coupler, meeting the requirements of IEC 60318-6, and - bone coupled/bone anchored devices measured on a skull simulator.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62489-1:2010/A2:2018(Amendment)
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components (IEC 62489-1:2010/A2:2017)
EN 62489-1:2010/A2:2018
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60118-4:2015/A1:2018(Amendment)
Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements (IEC 60118-4:2014/A1:2017)
EN IEC 60118-4:2015/A1:2018
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61669:2016(Main)
Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
EN 61669:2016

This International Standard gives recommendations and requirements for the measurement
and estimation of the real-ear acoustical performance characteristics of air-conduction
hearing aids and for the measurement of certain acoustic properties of the ear related to the
application of hearing aids.
Measurements of real-ear acoustical characteristics of hearing aids which apply non-linear or
analytical processing techniques are valid only for the test signals used and conditions
employed.
The purpose of this standard is to ensure that measurements of real-ear acoustical
performance characteristics of a given hearing aid on a given human ear can be replicated in
other locations with other test equipment.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60118-0:2015(Main)
Electroacoustics - Hearing aids - Measurement of the performance characteristics of hearing aids
EN 60118-0:2015

This part of IEC 60118 gives recommendations for the measurement of the performance
characteristics of air conduction hearing aids based on a free field technique and measured
with an acoustic coupler.
This part of IEC 60118 is applicable to the measurement and evaluation of the
electroacoustical characteristics of hearing aids, for example for type testing and
manufacturer data sheets.
The test results obtained by the methods specified in this part of IEC 60118 will express the
performance under conditions of the test and may deviate substantially from the performance
of the hearing aid under actual conditions of use.
This part of IEC 60118 uses an acoustic coupler according to IEC 60318-5 which is only
intended for loading a hearing aid with a specified acoustic impedance and is not intended to
model the sound pressure in a person’s ear. The use of this acoustic coupler will yield
different results from those obtained using the occluded ear simulator of IEC 60318-4 as used
in former editions of IEC 60118-0.
For the measurement of the performance characteristics of hearing aids for simulated in situ
working conditions, IEC 60118-8 can be used. For measurement of hearing aids under typical
user settings and using a speech-like signal, IEC 60118-15 can be used.
For the measurement of the performance characteristics of hearing aids for production, supply
and delivery quality-assurance purposes, IEC 60118-7 can be used. The frequency range has
been extended to 8 kHz in this part of IEC 60118 as opposed to 5 kHz in IEC 60118-7.
Though the number of measurements covered by this part of IEC 60118 is limited, it is not
intended that all measurements described herein are mandatory.
In cases of custom-made in-the-ear instruments, the data supplied by the manufacturer
applies only to the particular hearing aid being tested.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62489-1:2010/A1:2015(Amendment)
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
EN 62489-1:2010/A1:2015
  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60118-4:2015(Main)
Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - System performance requirements
EN 60118-4:2015

This part of IEC 60118 is applicable to audio-frequency induction-loop systems producing an
alternating magnetic field at audio frequencies and intended to provide an input signal for
hearing aids operating with an induction pick-up coil (telecoil). Throughout this standard, it is
assumed that the hearing aids used with it conform to all relevant parts of IEC 60118.
This standard specifies requirements for the field strength in audio-frequency induction loops
for hearing aid purposes, which will give adequate signal-to-noise ratio without overloading
the hearing aid. The standard also specifies the minimum frequency response requirements
for acceptable intelligibility.
Methods for measuring the magnetic field strength are specified, and information is given on
appropriate measuring equipment (see Annex B), information that should be provided to the
operator and users of the system (see Annex C), and other important considerations.
This standard does not specify requirements for loop driver amplifiers or associated
microphone or audio signal sources, which are dealt with in IEC 62489-1, or for the field
strength produced by equipment, such as telephone handsets, within the scope of ITU-T
P.370.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62489-2:2014(Main)
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
EN 62489-2:2014

This part of IEC 62489 applies to audio-frequency induction-loop systems for assisted
hearing. It may also be applied to such systems used for other purposes, as far as it is
applicable. The standard is intended for assessment of human exposure to low-frequency
magnetic fields produced by the system, by calculation and by in-situ testing.
This standard does not deal with other aspects of safety, for which IEC 60065 applies, or with
EMC.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day