SIST-TS CEN ISO/TS 18234-3:2006
(Main)Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application (ISO/TS 18234-3:2006)
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application (ISO/TS 18234-3:2006)
This Technical Specification establishes the method of delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent delivery of information about the availability of the same service on another bearer channel or similar service data from another service provider, directly from service provider to end-users. The term "application" is used in TPEG specifications to describe specific applications, which are at the highest layer of the ISO/OSI protocol stack (ISO/IEC 7498-1). Each TPEG application (e.g. TPEG-RTM) is assigned a unique number that is called the Application IDentification (AID). An AID is defined whenever a new application is developed. The AID is used within the TPEG-Service and Network Information Application (this document) to indicate how to process TPEG content and allows routing of data to an appropriate application decoder. AID = 0000 is assigned to the TPEG-SNI application, described in this specification. A number of tables of information are described, which provide comprehensive options for describing services, their timing, content, geographical coverage, etc. In all TPEG streams it is mandatory to deliver to so-called GST. Additionally it is possible to signal linkage of content between different bearers and services.
Reise- und Verkehrsinformation (TTI) ) - TTI über Datenströme der Transportprotokoll Expertengruppe (TPEG) - Teil 3: Informationsanwendungen für Dienste und Netze (SNI) (ISO/TS 18234-3:2006)
Informations sur le trafic et le tourisme (TTI) - Messages TTI via les flux de données du groupe d'experts du protocole de transport (TPEG) - Partie 3: Application de service et d'information de réseau (ISO/TS 18234-3:2006)
Prometne in potovalne informacije (TTI) – TTI preko toka podatkov ekspertne skupine za prometne in potovalne protokole (TPEG) – 3. del: Uporaba storitve in informacije omrežja (SNI) (ISO/TS 18234-3:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 18234-3:2006
01-julij-2006
Prometne in potovalne informacije (TTI) – TTI preko toka podatkov ekspertne
skupine za prometne in potovalne protokole (TPEG) – 3. del: Uporaba storitve in
informacije omrežja (SNI) (ISO/TS 18234-3:2006)
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG)
data-streams - Part 3: Service and Network Information (SNI) application (ISO/TS 18234-
3:2006)
Reise- und Verkehrsinformation (TTI) ) - TTI über Datenströme der Transportprotokoll
Expertengruppe (TPEG) - Teil 3: Informationsanwendungen für Dienste und Netze (SNI)
(ISO/TS 18234-3:2006)
Informations sur le trafic et le tourisme (TTI) - Messages TTI via les flux de données du
groupe d'experts du protocole de transport (TPEG) - Partie 3: Application de service et
d'information de réseau (ISO/TS 18234-3:2006)
Ta slovenski standard je istoveten z: CEN ISO/TS 18234-3:2006
ICS:
03.220.01
35.240.60
SIST-TS CEN ISO/TS 18234-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL SPECIFICATION CEN ISO/TS 18234-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION June 2006
ICS 35.240.60; 03.220.01
English Version
Traffic and Travel Information (TTI) - TTI via Transport Protocol
Expert Group (TPEG) data-streams - Part 3: Service and
Network Information (SNI) application (ISO/TS 18234-3:2006)
Informations sur le trafic et le tourisme (TTI) - Messages Reise- und Verkehrsinformation (TTI) ) - TTI über
TTI via les flux de données du groupe d'experts du Datenströme der Transportprotokoll Expertengruppe
protocole de transport (TPEG) - Partie 3: Application de (TPEG) - Teil 3: Informationsanwendungen für Dienste und
service et d'information de réseau (ISO/TS 18234-3:2006) Netze (SNI) (ISO/TS 18234-3:2006)
This Technical Specification (CEN/TS) was approved by CEN on 28 September 2004 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 18234-3:2006 E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
CEN ISO/TS 18234-3:2006 (E)
Foreword
This document (CEN ISO/TS 18234-3:2006) has been prepared by Technical Committee
CEN/TC 278 "Road transport and traffic telematics", the secretariat of which is held by NEN, in
collaboration with Technical Committee ISO/TC 204 "Transport information and control
systems".
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to announce this CEN Technical Specification: Austria,
Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
2
---------------------- Page: 3 ----------------------
TECHNICAL ISO/TS
SPECIFICATION 18234-3
First edition
2006-06-01
Traffic and Travel Information (TTI) — TTI
via Transport Protocol Expert Group
(TPEG) data-streams —
Part 3:
Service and Network Information (SNI)
application
Informations sur le trafic et le tourisme (TTI) — Messages TTI via les
flux de données du groupe d'experts du protocole de transport
(TPEG) —
Partie 3: Application de service et d'information de réseau
Reference number
ISO/TS 18234-3:2006(E)
©
ISO 2006
---------------------- Page: 4 ----------------------
ISO/TS 18234-3:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/TS 18234-3:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Abbreviations . 4
5 Application identification. 6
6 Conceptual model. 6
6.1 Conceptual model — Scope . 6
6.2 Conceptual model — Multiplexed applications and services . 7
7 Design principle . 8
7.1 Variable content referencing . 8
7.2 Example of the TPEG-SNI application in a TPEG data-stream . 9
7.3 Concept of allocating services. 10
7.4 General rules for the TPEG-SNI application . 11
8 Description of SNI data types. 12
8.1 Types for periodic time functions. 12
8.2 Operating time function . 13
8.3 Compound type for geographical coverage . 14
9 Description of basic features . 14
9.1 Service information . 14
9.2 Component information . 16
9.3 Linkage information. 20
10 Coding structure of basic features . 23
10.1 Component frame . 23
10.2 Service and network information component template. 23
10.3 Definition of service information. 23
10.4 Definition of the guide to the service tables . 25
10.5 Definition of the linkage table to the same service components . 27
10.6 Definition of the linkage table to related service components . 29
© ISO 2006 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO/TS 18234-3:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In other circumstances, particularly when there is an urgent market requirement for such documents, a
technical committee may decide to publish other types of normative document:
— an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in
an ISO working group and is accepted for publication if it is approved by more than 50 % of the members
of the parent committee casting a vote;
— an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical
committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting
a vote.
An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a
further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is
confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an
International Standard or be withdrawn.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TS 18234-3 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems.
ISO/TS 18234 consists of the following parts, under the general title Traffic and Travel Information (TTI) — TTI
via Transport Protocol Expert Group (TPEG) data-streams:
⎯ Part 1: Introduction, numbering and versions
⎯ Part 2: Syntax, Semantics and Framing Structure (SSF)
⎯ Part 3: Service and Network Information (SNI) application
⎯ Part 4: Road Traffic Message (RTM) application
⎯ Part 5: Public Transport Information (PTI) application
⎯ Part 6: Location referencing applications
iv © ISO 2006 – All rights reserved
---------------------- Page: 7 ----------------------
ISO/TS 18234-3:2006(E)
Introduction
TPEG technology uses a byte-oriented stream format, which may be carried on almost any digital bearer with
an appropriate adaptation layer. TPEG messages are delivered from service providers to end-users, and are
used to transfer application data from the database of a service provider to a user’s equipment.
This document describes the Service and Network Information Application, which provides a means of
informing end-users about all possible services and their content which are considered relevant by a service
provider to either provide continuity of his services or inform the end-user about other related services. As
stated in the design criteria, TPEG is a bearer independent system. Therefore some rules are established for
the relation of information contents of the same service on different bearers. Also the mechanisms for
following a certain service on one single bearer have to be defined. For the client decoder it is essential to find
an adjacent or similar service if it leaves the current reception area. Nonetheless, basic information describing
the service itself is necessary. For the ease of the user, e.g. the service name, the service provider name, the
operating time and many other hints are delivered by the TPEG-SNI application.
Also, general models for the hand-over and the referencing of services are developed and shown in detail. It
is important to note that this Part 3 of CEN ISO/TS 18234 (TPEG-SNI) is closely related to Part 2 (TPEG-SSF)
and so they shall be used together, being dependent upon each other.
The Broadcast Management Committee of the European Broadcast Union (EBU) established the B/TPEG
project group in autumn 1997 with the mandate to develop, as soon as possible, a new protocol for
broadcasting traffic and travel-related information in the multimedia environment. The TPEG technology, its
applications and service features are designed to enable travel-related messages to be coded, decoded,
filtered and understood by humans (visually and/or audibly in the user’s language) and by agent systems.
One year later in December 1998, the B/TPEG group produced its first public specifications. Two documents
were released. Part 2 (TPEG-SSF, CEN ISO/TS 18234-2) described the Syntax, Semantics and Framing
structure, which will be used for all TPEG applications. Part 4 (TPEG-RTM, CEN ISO/TS 18234-4) described
the first application, for Road Traffic Messages.
CEN/TC 278/WG 4, in conjunction with ISO/TC 204/WG 10, established a project group comprising the
members of B/TPEG and they have continued the work concurrently since March 1999. Since then two further
parts have been developed to make the initial complete set of four parts, enabling the implementation of a
consistent service. Part 3 (TPEG-SNI, CEN ISO/TS 18234-3, this document) describes the Service and
Network Information Application, which is likely to be used by all service implementations to ensure
appropriate referencing from one service source to another. Part 1 (TPEG-INV, CEN ISO/TS 18234-1)
completes the work, by describing the other parts and their relationships; it also contains the application IDs
used within the other parts.
In April 2000, the B/TPEG group released revised Parts 1 to 4, all four parts having been reviewed and
updated in the light of initial implementation results. Thus a consistent suite of specifications, ready for wide
scale implementation, was submitted to the CEN/ISO commenting process.
In November 2001, after extensive response to the comments received and from many internally suggested
improvements, all four parts were completed for the next stage: the Parallel Formal Vote in CEN and ISO. But
a major step forward has been to develop the so-called TPEG-Loc location referencing method, which
enables both map-based TPEG-decoders and non map-based ones to deliver either map-based location
referencing or human readable information. Part 6 (TPEG-Loc, CEN ISO/TS 18234-6) is now a separate
specification and is used in association with the other parts of CEN ISO/TS 18234 to provide comprehensive
location referencing. Additionally Part 5, the Public Transport Information Application (TPEG-PTI, CEN
ISO/TS 18234-5), has been developed and been through the commenting process.
This Technical Specification, CEN ISO/TS 18234-3, provides a full specification for the Service and Network
Information Application.
© ISO 2006 – All rights reserved v
---------------------- Page: 8 ----------------------
ISO/TS 18234-3:2006(E)
During the development of the TPEG technology a number of versions have been documented and various
trials implemented using various versions of the specifications. At the time of the publication of this Technical
Specification, all parts are fully inter-workable and no specific dependencies exist. This Technical
Specification has the technical version number TPEG-SNI_3.0/002.
vi © ISO 2006 – All rights reserved
---------------------- Page: 9 ----------------------
TECHNICAL SPECIFICATION ISO/TS 18234-3:2006(E)
Traffic and Travel Information (TTI) — TTI via Transport
Protocol Expert Group (TPEG) data-streams —
Part 3:
Service and Network Information (SNI) application
1 Scope
This Technical Specification establishes the method of delivering service and network information within a
TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent delivery
of information about the availability of the same service on another bearer channel or similar service data from
another service provider, directly from service provider to end-users.
The term “application” is used in TPEG specifications to describe specific applications, which are at the
highest layer of the ISO/OSI protocol stack (ISO/IEC 7498-1). Each TPEG application (e.g. TPEG-RTM) is
assigned a unique number that is called the Application IDentification (AID). An AID is defined whenever a
new application is developed. The AID is used within the TPEG-Service and Network Information Application
(this document) to indicate how to process TPEG content and allows routing of data to an appropriate
application decoder.
AID = 0000 is assigned to the TPEG-SNI application, described in this specification.
A number of tables of information are described, which provide comprehensive options for describing services,
their timing, content, geographical coverage, etc. In all TPEG streams it is mandatory to deliver to so-called
GST. Additionally it is possible to signal linkage of content between different bearers and services.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
CEN ISO/TS 18234-1, Traffic and Travel Information (TTI) — TTI via Transport Protocol Expert Group (TPEG)
data-streams — Part 1: Introduction, Numbering and Versions
CEN ISO/TS 18234-2, Traffic and Travel Information (TTI) — TTI via Transport Protocol Expert Group (TPEG)
data-streams – Part 2: Syntax, Semantics and Framing Structure (SSF)
ETSI EN 300 401, Radio broadcasting systems; Digital Audio Broadcasting (DAB) to mobile, portable and
fixed receivers
ETSI TS 101 759, Digital Audio Broadcasting (DAB); Data Broadcasting — Transparent Data Channel
IEC 62106, Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency
range from 87,5 to 108,0 MHz
ETSI EN 300 751, Radio broadcasting systems; System for Wireless Infotainment Forwarding and
Teledistribution (SWIFT)
© ISO 2006 – All rights reserved 1
---------------------- Page: 10 ----------------------
ISO/TS 18234-3:2006(E)
ETSI EN 300 468, Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB
systems
ISO/IEC 7498-1, Information technology — Open Systems Interconnection — Basic Reference Model: The
Basic Model
1
RFC 1738, Uniform Resource Locators (URL)
3 Terms and definitions
For the purpose of this Technical Specification, the following terms and definitions apply.
3.1
guide to the service tables (GST)
the guide to the service table (GST) carries the basic service information such as service structure, service
timing and content description, etc.
3.1.1
fast tuning GST (FT-GST)
This is a directory of the applications and content of the service and indicates in which components the
relevant information can be found. This contains the minimum set of information required for the acquisition of
application data
3.1.2
time schedule GST (TS-GST)
this optional table indicates the operation times of selected service components
3.1.3
content description GST (CD-GST)
this optional table gives the textual descriptions of selected service components
3.1.4
geographical coverage GST (GC-GST)
this optional table defines the spatial range of selected service components
3.1.5
service component reset GST (SCR-GST)
this optional table is used by the service provider to delete application specific data older than a certain
moment
3.2
service
a service comprises one or more applications; a service is a defined flow (from the service provider) of
information meant for either the general public or a special target group
3.3
service provider
the service provider manages the content of his service(s) and determines the TPEG applications in use and
their content. The service provider also decides whether a service is encrypted or not
— the service provider that generates the content of a service is called the originator,
— the service provider that carries content generated by another originator is called the carrier,
— there is only one originator of content but there may be more than one alternative carrier
1
RFC 1738 can be found at http://www.ietf.org/rfc/rfc1738.txt
2 © ISO 2006 – All rights reserved
---------------------- Page: 11 ----------------------
ISO/TS 18234-3:2006(E)
3.4
application
the application is used to describe a specific part (e.g. TPEG-RTM) of the TPEG specifications
3.5
content
the content is the information inside an application. A service may contain several instances of the same
application type, each containing different content. Within an application different content is labelled with a
unique content ID (COID) specified by the originator of the content
3.6
application instance
an application instance is an actual data stream containing content as defined by an application
3.7
content originator
the content originator is the original provider of an application instance. The content originator may distribute
the application data to different service providers. In some cases the service provider generates its own
application data and is therefore also the content originator
3.8
service component
a TPEG stream is logically divided into parts known as service components. Each service component carries
an application instance. A service component is effectively a “channel” within the multiplex of a TPEG stream.
Each stream comprises a number of these “channels” which are identified by the component identifier in CEN
ISO/TS 18234-2 (TPEG-SSF) and linked to the COID and AID in the TPEG-SNI application
3.9
service identification (SID-A, SID-B, SID-C)
the service identification is a worldwide unique identifier for a service. It consists of three elements called
SID-A, SID-B, SID-C. These are allocated as described in CEN ISO/TS 18234-2
There are two instances where Service Identification is used:
— originator SID (SID-A, SID-B, SID-C)
this is the service identification of the service provider who generates the content
— carrier SID (SID-A, SID-B, SID-C)
This is the service identification of the service provider who is delivering the service at the service frame
level
(see CEN/ISO/TS 18234-2, sections 7.3 and 7.3.2.1)
3.10
content identification (COID)
the content identification (COID) is used for labelling the content of a component. The COID is defined by the
originator of the content and is unique within a specific application
3.11
application and content identification (ACID)
the application and content identification uniquely identifies the content on a worldwide basis and is composed
of the originator service identification (SID-A, SID-B, SID-C), the content identification (COID) and the
application identification (AID)
3.12
application identification (AID)
the AID indicates how to process TPEG content and routes information to the appropriate application decoder.
Each TPEG application has a unique number, which identifies the application according section 5. The
application identification is part of the TPEG specification and is defined as and when new applications are
developed
© ISO 2006 – All rights reserved 3
---------------------- Page: 12 ----------------------
ISO/TS 18234-3:2006(E)
3.13
service component identification (SCID)
the SCID uniquely identifies a service component within a service and is chosen by the carrier service
provider. It identifies a component which itself has an ACID comprising originator SID, COID and AID. The
same number may be used in a different service or, in the same service at a later time to identify a completely
different combination of originator SID, COID and AID
4 Abbreviations
For the purposes of this Technical Specification, the following abbreviations apply.
4.1
AID
Application Identification
4.2
ACID
Application and Content Identification
4.3
BPN
Broadcast, Production and Networks (an EBU document publishing number system)
4.4
B/TPEG
Broadcast/TPEG (the EBU project group name for the specification drafting group)
4.5
CEN
Comité Européen de Normalisation
4.6
COID
Content Identification
4.7
DAB
Digital Audio Broadcasting
4.8
DARC
Data Radio Channel - an FM sub-carrier system for data transmission
4.9
DVB
Digital Video Broadcasting
4.10
EBU
European Broadcasting Union
4.11
ETSI
European Telecommunications Standards Institute
4.12
GST
Guide to Service Tables
4 © ISO 2006 – All rights reserved
---------------------- Page: 13 ----------------------
ISO/TS 18234-3:2006(E)
4.13
INV
Introduction, Numbering and Versions (see CEN ISO/TS 18234–1)
4.14
IPR
Intellectual Property Right(s)
4.15
ISO
International Organization for Standardization
4.16
OSI
Open Systems Interconnection
4.17
PTI
Public Transport Information (see CEN ISO 18234-5)
4.18
RTM
Road Traffic Message application (see CEN ISO 18234-4)
4.19
SCID
Service Component Identification
4.20
SID
Service Identification
4.21
SNI
Service and Network Information application (this specification)
4.22
SSF
Syntax, Semantics and Framing Structure (see CEN ISO/TS 18234-2)
4.23
STI
Status and Travel-time Information (proposed TPEG application)
4.24
tba
to be announced
4.25
TPEG
Transport Protocol Experts Group
4.26
TTI
Traffic and Travel Information
4.27
UTC
Coordinated Universal Time
© ISO 2006 – All rights reserved 5
---------------------- Page: 14 ----------------------
ISO/TS 18234-3:2006(E)
4.28
WEA
Weather Information (proposed TPEG application)
5 Application identification
The word 'application' is used in the TPEG specifications to describe specific applications, which are at the
highest layer of the ISO/OSI model as defined in ISO 7498-1. Each TPEG application is assigned a unique
number, called the Application IDentification (AID). An AID is defined whenever a new application is
developed and these are all listed in CEN ISO/TS 18234-1.
The application identification number is used within the TPEG-SNI application to indicate how to process
TPEG content and facilitates the routing of information to the appropriate application decoder.
Since TPEG-SNI is itself classed as an application, it is assigned the AID = 0000.
6 Conceptual model
6.1 Conceptual model — Scope
The Service and Networ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.