oSIST prEN 3628:2022
(Main)Aerospace series - Lockwire, drawn - Corrosion resisting steel
Aerospace series - Lockwire, drawn - Corrosion resisting steel
This document specifies the dimensions and tolerances for corrosion resisting steel drawn lockwire for aerospace applications.
Luft- und Raumfahrt - Sicherungsdraht, gezogen - Aus korrosionsbeständigem Stahl
Série aérospatiale - Fils à freiner étirés - Acier résistant à la corrosion
Le présent document spécifie les dimensions et tolérances des fils à freiner étirés en acier résistant à la corrosion pour les applications aérospatiales.
Aeronavtika - Vlečena zaklepna žica - Korozijsko odporna pločevina
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 3628:2022
01-junij-2022
Aeronavtika - Vlečena zaklepna žica - Korozijsko odporna pločevina
Aerospace series - Lockwire, drawn - Corrosion resisting steel
Luft- und Raumfahrt - Sicherungsdraht, gezogen - Aus korrosionsbeständigem Stahl
Série aérospatiale - Fils à freiner étirés - Acier résistant à la corrosion
Ta slovenski standard je istoveten z: prEN 3628
ICS:
49.025.99 Drugi materiali Other materials
oSIST prEN 3628:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 3628:2022
---------------------- Page: 2 ----------------------
oSIST prEN 3628:2022
DRAFT
EUROPEAN STANDARD
prEN 3628
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 49.025.99
English Version
Aerospace series - Lockwire, drawn - Corrosion resisting
steel
Série aérospatiale - Fils à freiner étirés - Acier résistant Luft- und Raumfahrt - Sicherungsdraht, gezogen - Aus
à la corrosion korrosionsbeständigem Stahl
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3628:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3628:2022
prEN 3628:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 4
4.1 Material . 4
4.2 Form. 4
4.3 Dimensions and masses . 5
4.3.1 Diameters and masses . 5
4.3.2 Tolerances on diameters . 5
4.4 Roundness . 5
4.5 Lengths.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.