SIST EN 4374:2023

Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm

This document specifies the requirements relating to:
Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3)
Solution treated and precipitation treated
Bars and sections
De ≤ 200 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Lösungsgeglüht und ausscheidungsgehärtet - Stangen und Profile - De ≤ 200 mm

Série aérospatiale - Alliage résistant à chaud NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Mis en solution et précipité - Barres et profilés - De ≤ 200 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud NI-PH1301 (NiCr19Co18Mo4Ti3Al3)
Mis en solution et précipité
Barres et profilés
De ≤ 200 mm
pour les applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Topilno žarjena in izločevalno utrjena - Palice in profili - De ≤ 200 mm

Ta dokument določa zahteve, ki se navezujejo na:
toplotno odporno zlitino NI-PH1301 (NiCr19Co18Mo4Ti3Al3),
topilno žarjeno in izločevalno utrjeno,
palice in profile,
De ≤ 200 mm,
za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 22-Jan-2023
• ICS: 49.025.99 - Other materials
• ICS: 77.140.60 - Steel bars and rods
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Jan-2023
• Due Date: 11-Mar-2023
• Completion Date: 23-Jan-2023
• Ref Project: EN 4374:2022 - Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4374:2023
01-marec-2023
Aeronavtika - Toplotno odporna zlitina NI-PH1301 (NiCr19Co18Mo4Ti3Al3) -
Topilno žarjena in izločevalno utrjena - Palice in profili - De ≤ 200 mm
Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution
treated and precipitation treated - Bars and sections - De ≤ 200 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH1301 (NiCr19Co18Mo4Ti3Al3) -
Lösungsgeglüht und ausscheidungsgehärtet - Stangen und Profile - De ≤ 200 mm
Série aérospatiale - Alliage résistant à chaud NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Mis
en solution et précipité - Barres et profilés - De ≤ 200 mm
Ta slovenski standard je istoveten z: EN 4374:2022
ICS:
49.025.99 Drugi materiali Other materials
77.140.60 Jeklene palice in drogovi Steel bars and rods
SIST EN 4374:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4374:2023

---------------------- Page: 2 ----------------------
SIST EN 4374:2023


EN 4374
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2022
EUROPÄISCHE NORM
ICS 49.025.99
English Version

Aerospace series - Heat-resisting alloy NI-PH1301
(NiCr19Co18Mo4Ti3Al3) - Solution treated and
precipitation treated - Bars and sections - De  200 mm
Série aérospatiale - Alliage résistant à chaud NI- Luft- und Raumfahrt - Hochwarmfeste Legierung NI-
PH1301 (NiCr19Co18Mo4Ti3Al3) - Mis en solution et PH1301 (NiCr19Co18Mo4Ti3Al3) - Lösungsgeglüht
précipité - Barres et profilés - De  200 mm und ausscheidungsgehärtet - Stangen und Profile - De 
200 mm
This European Standard was approved by CEN on 24 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4374:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4374:2023
EN 4374:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
SIST EN 4374:2023
EN 4374:2022 (E)
European foreword
This document (EN 4734:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall
be withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and quest
...