iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10241:2001

(Main)

Steel threaded pipe fittings

Steel threaded pipe fittings

This European standard specifies requirements for threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas.

Stahlfittings mit Gewinde

Diese Norm legt Anforderungen fest für Gewindefittings mit Nennweiten DN 6 bis einschließlich DN 150, aus geschweißten oder nahtlosen Rohren, Schmiedestücken und gewalzten Stäben. Sie gilt für solche Stahlfittings mit Gewinde, die für den Transport von Flüssigkeiten und Gas verwendet werden.

Raccords filetés en acier

La présente norme européenne définit les prescriptions relatives aux raccords filetés de dimensions nominales allant du DN 6 au DN 150 inclus, fabriquées a partir de tubes en acier soudés ou sans soudure, de pieces forgées et de barres laminées. Elle est applicable aux raccords filetés en acier qui sont utilisés pour le transport et la distribution de liquide ou de gaz.

Jekleni fitingi z navojem

General Information

Status
Published
Publication Date
31-Oct-2001
ICS
23.040.40 - Metal fittings
Technical Committee
IFEK - Ferrous metals
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2001
Due Date
01-Nov-2001
Completion Date
01-Nov-2001
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 10241:2000 - Steel threaded pipe fittings

Buy Standard

EN 10241:2001EN 10241:2001
PreviousNext
Standard
EN 10241:2001
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Jekleni fitingi z navojemStahlfittings mit GewindeRaccords filetés en acierSteel threaded pipe fittings23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 10241:2000SIST EN 10241:2001en01-november-2001SIST EN 10241:2001SLOVENSKI
STANDARD



SIST EN 10241:2001



SIST EN 10241:2001



SIST EN 10241:2001



SIST EN 10241:2001



SIST EN 10241:2001



SIST EN 10241:2001



SIST EN 10241:2001



SIST E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10374:2021(Main)
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
EN 10374:2021

This document specifies dimensions, tolerances, internal and external surface characteristics and marking of welded fittings for the food and chemical industry.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10253-2:2021(Main)
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
EN 10253-2:2021

This draft European Standard specifies the technical delivery requirements for seamless and welded butt welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of carbon and alloy steel in two test categories which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases.
It specifies:
a)   type of fittings;
1)   type A: Butt-welding fittings with reduced pressure factor;
2)   type B: Butt-welding fittings for use at full service pressure;
b)   steel grades and their chemical compositions;
c)   mechanical properties;
d)   dimensions and tolerances;
e)   requirements for inspection and testing;
f)   inspection documents;
g)   marking;
h)   protection and packaging.
NOTE   In the case of a harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently it is essential that the technical data stated in the material standard be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the PED are satisfied.

  • Standard
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    149 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10253-4:2008/AC:2009(Corrigendum)
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10253-4:2008/AC:2009

1.1 This Part of EN 10253 specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperature or at elevated temperatures.
It specifies:
- the type of fittings;
- type A : Butt-welding fittings with reduced pressure factor;
- type B : Butt-welding fittings for use at full service pressure;
- the steel grades;
- the mechanical properties;
- the dimensions and tolerances;
- the requirements for inspection and testing;
- the inspection documents;
- the marking;
- the handling and packaging.
1.2 Unless otherwise specified in this Part of EN 10253 the general technical delivery requirements in EN 10021 apply.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10253-3:2009(Main)
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10253-3:2008

This part of EN 10253 specifies the technical delivery requirements for seamless and welded buttwelding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic - ferritic (duplex) stainless steel without specific inspection requirements. It specifies : - the steel grades ; - the mechanical properties ; - the dimensions and tolerances ; - the requirements for inspection and testing ; - the inspection documents ; - the marking ; - the handling and packaging. Unless otherwise specified in this part of EN 10253 the general technical delivery requirements in EN 10021 shall apply. Limitation of use The allowed pressures and temperatures are the responsibility of the customer according to the state of the art and in application of the safety coefficients in the application regulations, codes and standards. In common, joint coefficient are used in the calculation of the thicknesses of components which include one or several butt welds, other than circumferential : - for equipment subject to random non-destructive testing : 0,85 ; - for equipment not subject to non-destructive testing other than visual inspection : 0,7.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10253-4:2008(Main)
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10253-4:2008

1.1 This Part of EN 10253 specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperature or at elevated temperatures.
It specifies:
- the type of fittings;
- type A : Butt-welding fittings with reduced pressure factor;
- type B : Butt-welding fittings for use at full service pressure;
- the steel grades;
- the mechanical properties;
- the dimensions and tolerances;
- the requirements for inspection and testing;
- the inspection documents;
- the marking;
- the handling and packaging.
1.2 Unless otherwise specified in this Part of EN 10253 the general technical delivery requirements in EN 10021 apply.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10224:2003/A1:2005(Amendment)
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions
EN 10224:2002/A1:2005

1.1 This European standard specifies requirements for the products listed below for the conveyance of aqueous liquids, including water for human consumption: - seamless and welded non-alloy steel tubes; - end preparation of tube ends for butt welding; - fittings fabricated from the tube; - fittings fabricated from plate or strip. 1.2 This European standard covers a range of tube outside diameters from 26,9 mm to 2 743 mm.

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10242:1997/A2:2003(Amendment)
Threaded pipe fittings in malleable cast iron
EN 10242:1994/A2:2003

Deletion of the Clause 12 "Quality assurance system" and creation of an informative annex with the text of Clause 12.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10224:2003(Main)
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
EN 10224:2002

1.1 This European standard specifies requirements for the products listed below for the conveyance of aqueous liquids, including water for human consumption: - seamless and welded non-alloy steel tubes; - end preparation of tube ends for butt welding; - fittings fabricated from the tube; - fittings fabricated from plate or strip. 1.2 This European standard covers a range of tube outside diameters from 26,9 mm to 2 743 mm.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10284:2001(Main)
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
EN 10284:2000

This standard specifies the requirements for the design, performance and testing of fittings made of malleable cast iron (see also clause 5 Materials) with compression ends for polyethylene piping systems. It applies to piping systems in polyethylene (PE) materials for different application fields, such as water and gas supply, water distribution, irrigation and gaseous fuel systems.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10253-1:2000(Main)
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements
EN 10253-1:1999

This European Standard specifies requirements for steel butt-welding fittings (elbows and return bends, concentric and eccentric reducers, equal and reducing tees, dished ends and caps) made of wrought carbon steel and delivered without specific inspection. The fittings described in this European Standard do not fulfil specific design requirements; consequently they cannot be considered as conforming to the Essential Requirements of the Pressure Equipment Directive (Directive 97/23/EC of 29.05.1997).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day