Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-10-1:2014)

This part of IEC 61196 applies to coaxial communication cables described in IEC 61196-10. It
specifies the requirements for semi-rigid radio frequency and coaxial cables with solid
dielectric and semi-airspace dielectric. These cables are intended for use in microwave and
wireless equipment or other signal transmission equipment or units at frequencies above
500 MHz.
This part of IEC 61196 is to be read in conjunction with IEC 61196-1 and IEC 61196-10. The
blank detail specification determines the layout and style for detail. Detail specifications,
based on the blank detail specification, may be prepared by a national organization, a
manufacturer or a user.

Koaxiale Kommunikationskabel - Teil 10-1: Vordruck für Bauartspezifikation für halb-starre Kabel mit Polytetrafluorethylen- (PTFE-)Isolation (IEC 61196-10-1:2014)

Câbles coaxiaux de communication - Partie 10-1: Spécification particulière-cadre relative aux câbles semi-rigides comportant un diélectrique polytétrafluoroéthylène (PTFE) (CEI 61196-10-1:2014)

IEC 61196-10-1:2014 s'applique aux câbles coaxiaux de communication décrits dans l'IEC 61196-10. Elle spécifie les exigences applicables aux câbles coaxiaux et pour fréquences radioélectriques à diélectrique solide et à diélectrique semi-aéré. Ces câbles sont destinés à être utilisés dans les équipements à micro-ondes et sans fil ou dans d'autres équipements ou unités de transmission de signaux, à des fréquences supérieures à 500 MHz. La spécification particulière-cadre détermine la structure et le modèle de manière détaillée. Des spécifications particulières, fondées sur la présente spécification particulière-cadre, peuvent être élaborées par un organisme national, un fabricant ou un utilisateur.
Cette publication doit être lue conjointement avec la l'IEC 61196-1 et l'IEC 61196-10.

Komunikacijski koaksialni kabli - 10-1. del: Okvirna podrobna specifikacija poltogih kablov s politetrafluoretilenskim (PTFE) dielektrikom (IEC 61196-10-1:2014)

Ta del standarda IEC 61196 se uporablja za komunikacijske koaksialne kable, opisane v standardu IEC 61196-10. Določa zahteve za poltogo radijsko frekvenco in koaksialne kable s togim dielektrikom in polzračnim dielektrikom. Ti kabli so namenjeni za uporabo v mikrovalovni in brezžični opremi, drugi opremi za prenos signalov ali enotah, ki delujejo na frekvencah, višjih od 500 MHz.
Ta del standarda IEC 61196 je treba uporabljati v povezavi s standardoma IEC 61196-1 in IEC 61196-10. Okvirna podrobna specifikacija določa obliko in slog podrobnosti. Specifikacije podrobnosti, ki temeljijo na okvirni podrobni specifikaciji, lahko pripravi nacionalna organizacija, proizvajalec ali uporabnik.

General Information

Status
Published
Publication Date
26-Feb-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Dec-2014
Due Date
12-Feb-2015
Completion Date
27-Feb-2015

Buy Standard

Standard
EN 61196-10-1:2015
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61196-10-1:2015
01-april-2015
Komunikacijski koaksialni kabli - 10-1. del: Okvirna podrobna specifikacija
poltogih kablov s politetrafluoretilenskim (PTFE) dielektrikom (IEC 61196-10-
1:2014)
Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric (IEC 61196-10-1:2014)
Koaxiale Kommunikationskabel - Teil 10-1: Vordruck für Bauartspezifikation für halb-
starre Kabel mit Polytetrafluorethylen- (PTFE-)Isolation (IEC 61196-10-1:2014)
Câbles coaxiaux de communication - Partie 10-1: Spécification particulière-cadre relative
aux câbles semi-rigides comportant un diélectrique polytétrafluoroéthylène (PTFE) (CEI
61196-10-1:2014)
Ta slovenski standard je istoveten z: EN 61196-10-1:2014
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 61196-10-1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61196-10-1:2015

---------------------- Page: 2 ----------------------

SIST EN 61196-10-1:2015


EUROPEAN STANDARD EN 61196-10-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2014
ICS 33.120.10

English Version
Coaxial communication cables -
Part 10-1: Blank detail specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric
(IEC 61196-10-1:2014)
Câbles coaxiaux de communication -  Koaxiale Kommunikationskabel -
Partie 10-1: Spécification particulière-cadre relative aux Teil 10-1: Vordruck für Bauartspezifikation für halb-starre
câbles semi-rigides comportant un diélectrique Kabel mit Polytetrafluorethylen- (PTFE-)Isolation
polytétrafluoroéthylène (PTFE) (IEC 61196-10-1:2014)
(CEI 61196-10-1:2014)
This European Standard was approved by CENELEC on 2014-10-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61196-10-1:2014 E

---------------------- Page: 3 ----------------------

SIST EN 61196-10-1:2015
EN 61196-10-1:2014 - 2 -
Foreword
The text of document 46A/1214/FDIS, future edition 1 of IEC 61196-10-1, prepared by
SC 46A "Coaxial cables" of IEC/TC 46 "Cables, wires, waveguides, R.F. connectors, R.F. and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61196-10-1:2014.

The following dates are fixed:
• latest date by which the document has to be (dop) 2015-07-30
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-10-30
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61196-10-1:2014 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61196-10-1:2015
- 3 - EN 61196-10-1:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year
IEC 61196-1 2005 Coaxial communication cables - - -
Part 1: Generic specification - General,
definitions and requirements
IEC 61196-10 2014 Coaxial communication cables - - -
Part 10: Sectional specification for semi-
rigid cables with polytetrafluoroethylene
(PTFE) dielectric

---------------------- Page: 5 ----------------------

SIST EN 61196-10-1:2015

---------------------- Page: 6 ----------------------

SIST EN 61196-10-1:2015



IEC 61196-10-1

®


Edition 1.0 2014-09




INTERNATIONAL



STANDARD



















Coaxial communication cables –

Part 10-1: Blank detail specification for semi-rigid cables with

polytetrafluoroethylene (PTFE) dielectric


























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
J




ICS 33.120.10 ISBN 978-2-8322-1863-1



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61196-10-1:2015
– 2 – IEC 61196-10-1:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Guidance for the preparation of detail specifications . 5
4 Blank detail specification . 6
Annex A (normative) Maximum attenuation . 9

---------------------- Page: 8 ----------------------

SIST EN 61196-10-1:2015
IEC 61196-10-1:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

COAXIAL COMMUNICATION CABLES –

Part 10-1: Blank detail specification for semi-rigid cables
with polytetrafluoroethylene (PTFE) dielectric

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.