EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 13782:2026

(Main)

Temporary structure - Tents - Safety

Temporary structure - Tents - Safety

This document specifies safety requirements which need to be observed at design, calculation, manufacture, installation, maintenance, of mobile, temporary installed tents with more than 50 m2 ground area.
This document applies also to multiple small tents which are normally not covered by this document and will be installed close together and exceed 50 m2 in sum.
NOTE   Information is given in Annex C on examination and approval.

Fliegende Bauten - Zelte - Sicherheit

Dieses Dokument legt Sicherheitsanforderungen fest, die bei der Konstruktion, Berechnung, Fertigung, Montage und Wartung von mobilen, vorübergehend aufgebauten Zelten mit einer Grundfläche von mehr als 50 m2 beachtet werden müssen.
Dieses Dokument gilt auch für Gruppen von üblicherweise nicht durch dieses Dokument abgedeckten kleinen Zelten, wenn diese nahe beieinander aufgebaut werden und die Gesamtfläche der Zeltgruppe mehr als 50 m2 beträgt.
ANMERKUNG   Informationen zu Prüfung und Zulassung sind in Anhang C angegeben.

Structure temporaire - Tentes - Sécurité

Le présent document spécifie les exigences de sécurité devant être observées lors de la conception, du calcul, de la fabrication, de l'installation et de la maintenance des tentes mobiles installées temporairement ayant une surface au sol supérieure à 50 m2.
Le présent document s’applique également à des tentes de petite taille qui ne sont normalement pas couvertes par le présent document et qui, installées côte à côte, représentent au total une surface supérieure à 50 m2.
NOTE   L'Annexe C fournit des informations sur les examens et l’homologation.

Začasne konstrukcije - Šotori - Varnost

General Information

Status
Not Published
Public Enquiry End Date
30-Jan-2026
ICS
91.040.99 - Other buildings
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
21-Nov-2025
Due Date
10-Apr-2026
Ref Project
prEN 13782 - Temporary structure - Tents - Safety

Relations

Revises
SIST EN 13782:2015 - Temporary structure - Tents - Safety
Effective Date
26-Jun-2024
oSIST prEN 13782:2026oSIST prEN 13782:2026
PreviousNext
Draft
oSIST prEN 13782:2026
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2026
Začasne konstrukcije - Šotori - Varnost
Temporary structure - Tents - Safety
Fliegende Bauten - Zelte - Sicherheit
Structure temporaire - Tentes - Sécurité
Ta slovenski standard je istoveten z: prEN 13782
ICS:
91.040.99 Druge stavbe Other buildings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2025
ICS 91.040.99 Will supersede EN 13782:2015
English Version
Temporary structure - Tents - Safety
Structure temporaire - Tentes - Sécurité Fliegende Bauten - Zelte - Sicherheit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 152.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13782:2025 E
worldwide for CEN national Members.

Page
Contents
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements for design, analysis and examination . 9
4.1 Design documents . 9
4.2 Description of construction and operation . 9
4.3 Construction drawings . 9
5 Selection of materials . 10
5.1 General . 10
5.2 Selection of covering materials . 10
5.3 Joining of covering materials . 10
6 Principles of numerical analysis . 10
6.1 General . 10
6.2 Verification . 11
7 Design actions . 11
7.1 General . 11
7.2 Permanent actions . 11
7.3 Equivalent load . 11
7.4 Variable actions . 12
7.4.1 Live loads . 12
7.4.2 Wind loads . 13
7.4.3 Snow loads . 16
7.4.4 Seismic forces . 17
7.5 Load combinations . 17
8 Verification of stability and equilibrium . 17
8.1 General . 17
8.2 Verification against overturning, sliding and lifting. 18
8.2.1 General . 18
8.2.2 Safety against overturning . 18
8.2.3 Safety against sliding . 19
8.2.4 Safety against lifting . 20
8.3 Dead load for tent covers . 20
8.4 Structures with primary load-bearing structure . 20
8.4.1 Ballast mountings for protection against wind loads . 20
8.4.2 Wind bracings . 20
8.4.3 Cladding forces on the structure due to wind . 21
8.5 Membrane and pole tent . 21
8.5.1 General . 21
8.5.2 Pre-stressing . 21
8.5.3 Design and construction details on membrane . 22
8.6 Verification of load-bearing capacity of technical textiles and their welded
connections . 22
8.6.1 General . 22
8.6.2 Load-bearing capacity of technical textiles and their welded connections . 22
8.6.3 Load-bearing capacity of other textile connections . 23
8.7 Safety margin, safeguards . 23
8.8 Post tensioning . 23
9 Ground anchorages . 24
9.1 General . 24
9.2 Load-bearing capacity of weight anchors . 24
9.3 Load-bearing capacity of rod anchors . 24
9.4 Test loadings on site . 27
9.5 Calculation of loading capacities . 27
9.6 Further requirements . 27
9.7 Ground support for packing . 28
10 Other structural components. 28
10.1 General . 28
10.2 Design resistance . 29
10.3 Synthetic fibre ropes . 29
10.4 Ratchets . 29
11 Manufacture and supply . 30
11.1 General . 30
11.2 Certificates . 30
11.3 Observation of the design specification . 30
11.4 Description of installation and operation procedures. 30
12 Special design and manufacture criteria . 30
Annex A (normative) Use of anti-slip mats . 31
A.1 General . 31
A.2 Discard maturity . 31
Annex B (informative) Special design and manufacture criteria and operation. 32
B.1 General . 32
B.2 Escape routes . 32
B.2.1 Common recommendations. 32
B.2.2 Design of emergency exits . 32
B.2.3 Layout of escape routes . 32
B.3 Stairs . 32
B.4 Burning behaviour . 33
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 22359:2025(Main)
Security and resilience - Guidelines for hardened protective shelters (ISO 22359:2024)
EN ISO 22359:2025

This document provides guidelines for the design, use and maintenance of hardened protective shelters (hereafter referred to as “shelters”). It specifies guidance on the layout, structures, equipment and actions related to a shelter.
This document is intended for organizations or individuals responsible for or involved in decision-making, planning, implementation, administration, use or upkeep of shelters, such as local, regional and national governments, civil protection agencies, first responders and businesses such as designers, constructers and equipment suppliers.
This document does not cover the minimum requirements or exact specifications for the properties of or actions related to a shelter; nor does it cover rapidly erected temporary shelters, such as lightweight canvas weather shelters, other tarp tent shelters, or metal and container shelters. Military shelters are subject to additional requirements which are outside the scope of this document.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17879:2024(Main)
Event structures - Safety requirements
EN 17879:2023

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, assembly, operation, disassembly, inspection and maintenance of the following, but not limited to:
•   structures e.g. stage roofs, stage floors, follow spot towers, PA towers,
•   LED support structures,
•   one-off event structures,
•   hospitality structures,
•   temporary spectator facilities.
The above hereafter called event structures are structures intended to be installed and dismantled specifically for an event.
This document does not cover:
•   Spectator facilities – EN 13200-series,
•   Temporary structure – Tents – safety by EN 13782,
•   Fairground and amusement park machinery and structures as per EN 13814 series,
•   Temporary works equipment covered by CEN/TC 53,
•   Inflatable play equipment-safety requirements and test methods as per EN 14960,
•   Entertainment Technology as described by CEN TC 433.
NOTE   This document is not applicable to event structures which are designed, manufactured, placed on the market or put in service before the date of publication of this document by CEN.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16194:2023(Main)
Mobile non-sewer-connected toilet cabins - Requirements of services and products relating to the deployment of cabins and sanitary products
EN 16194:2023

This document applies to mobile non-sewer-connected toilet cabins system.
It specifies the requirements for services related to the provision of toilet cabins and the relevant requirements for toilet cabins and sanitary products, taking into account comfort, hygiene, health and safety.
It specifies the minimum quality requirements for toilet cabins and sanitary products, as well as the extent of on-site service and the required disinfection and the number of toilet cabins to be provided. It also determines the frequency of use, the maximum number of uses per toilet cabins, the locations and the intervals for on-site service or disposal of faecal water.
This document is applicable to the framework of activities carried out in the following sectors:
—   construction and extractive industries, opencast or underground;
—   public events and recreational activities, festivals and concerts;
—   agriculture, labour camps and temporary work camps;
—   beaches;
—   emergencies;
—   military tactical and training exercises.
There are other types of mobile toilet cabins which are not connected to a sewage system (e.g. dry toilets, composting toilets, incinerations toilets, vacuum toilets, or other technologies and processes) and which are not covered by this document.
This document establishes a system to ensure that mobile sanitation facilities for waste disposal are available not only in the workplaces but wherever there are no waste disposal systems connected to a sewerage network.
This document is directed at manufacturers, services providers' companies and publics or private cabin hirers of toilet cabins not connected to a sewage network.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13782:2015(Main)
Temporary structure - Tents - Safety
EN 13782:2015

This European Standard specifies safety requirements which need to be observed at design, calculation, manufacture, installation, maintenance, of mobile, temporary installed tents with more than 50 m2 ground area.
This European Standard applies also to multiple small tents which are normally not covered by this standard and will be installed close together and exceed 50 m2 in sum.
NOTE   Information is given in Annex C on Examination and Approval.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 15978-1:2021(Main)
Sustainability of construction works - Methodology for the assessment of performance of buildings - Part 1: Environmental Performance
prEN 15978-1

This European Standard specifies the calculation method, based on Life Cycle Assessment (LCA) and other quantified environmental information, to assess the environmental performance of a building, and gives the means for the reporting and communication of the outcome of the assessment. The standard is applicable to new and existing buildings and refurbishment projects.
The standard gives:
- the description of the object of assessment;
- the system boundary that applies at the building level;
- the procedure to be used for the inventory analysis;
- the list of indicators and procedures for the calculations of these indicators;
- the requirements for presentation of the results in reporting and communication;
- and the requirements for the data necessary for the calculation.
The approach to the assessment covers all stages of the building life cycle and is based on data obtained from Environmental Product Declarations (EPD), their "information modules" (prEN 15804) and other information necessary and relevant for carrying out the assessment. The assessment includes all building related construction products, processes and services, used over the life cycle of the building.
The interpretation and value judgments of the results of the assessment are not within the scope of this European Standard.

  • Draft
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN 15978:2025(Main)
Sustainability of construction works - Assessment of environmental performance of buildings - Requirements and guidance
FprEN 15978

This document specifies the calculation method, based on Life Cycle Assessment (LCA) and other quantified environmental information, to assess the environmental performance of a building and its site, and gives the means for the reporting and communication of the outcome of the assessment. The standard is applicable to new and existing buildings and refurbishment projects.
The document gives:
-   the description of the object of assessment,
-   the system boundary that applies at the building level,
-   the procedure to be used for the inventory analysis,
-   the list of indicators and procedures for the calculation of these indicators,
-    demand for information concerning environmental impacts and aspects at the local environment level (including emissions to indoor air),
-   demand for information concerning building generated energy reporting and design for circularity as technical characteristics that support environmental performance,
-   the requirements for the data necessary for the calculation, and
-   the requirements for presentation of the results in reporting and communication.
The approach to the assessment covers all stages of the building life cycle and is based on data obtained from Environmental Product Declarations (EPD), their “information modules” (EN 15804:2012+A2:2019) and other data and information necessary and relevant for carrying out the assessment. The assessment includes all building related construction products, processes and services, used over the life cycle of the building.
Methodologies for and approaches to the interpretation and the making of value judgments of the results of the assessment are not within the scope of this document.
NOTE 1   This document provides system boundaries, calculation rules and indicators to compile and assess the life cycle inventory and life cycle environmental impacts of buildings.
NOTE 2   The document also provides the methodological basis and assessment rules to support the achievement of environment related macro objectives in Europe and instruments such as the European reporting framework Level(s). More information can be found at Level(s) (europa.eu).

  • Draft
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22300:2026(Main)
Security and resilience - Vocabulary (ISO 22300:2025)
EN ISO 22300:2025

This document defines terms related to security and resilience topics.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62841-2-12:2024/AC:2026(Corrigendum)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
EN IEC 62841-2-12:2024/AC:2025-11
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 18063:2026(Main)
Explosives for civil uses - Assessment of on-site mixed explosives and associated manufacturing units
CEN/TS 18063:2025

This document gives guidance on the issues related to the conformity assessment of explosives manufactured on-site.
On one hand, it specifies requirements to be considered for the assessment during the design phase of the explosive and a simple and robust approach to follow for the assessment of the conformity in the production phase.
And on the other hand, it specifies requirements for the mobile manufacturing units and their accessories as a contribution to the guarantee of the conformity of explosives produced in on-site conditions with no access to a laboratory.
This document gives guidance on also basic requirements for explosives loading equipment.
This document does not apply to the preparation of multi-component explosives as they neither require manufacturing equipment nor mechanical loading.
NOTE 1   This document does not address the requirements of the transport of dangerous goods regulations.
NOTE 2   This document does not address the requirements established in Directive 2006/42/EC (Machinery).
NOTE 3   Despite the provisions given in this document, other provisions provided for in state, federal or local regulations apply.
NOTE 4   The intention of this document is not to hinder the development and use of new technologies (including equipment and processes) for the on-site manufacture of explosive, but because of limited access to testing resources on site, the approach consisting of having specified requirements for the equipment is valid to ensure the conformity of future products and technologies.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13124-1:2026(Main)
Windows, doors, shutters and curtain walling - Explosion resistance - Test method - Part 1: Shock tube
EN 13124-1:2025

This document defines a test method to permit a classification according to EN 13123-1:2025 for explosion resistance of windows, doors, shutters as well as curtain walling elements, complete with their frames, infills and fixings. This document gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day