SIST EN 62625-2:2017
(Main)Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing
Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing
This part of IEC 62625 covers the standardized test methods for verifying the compliance of
an On board Driving Data Recording System implementation with the requirements specified
by IEC 62625-1.
Furthermore, it covers the conformity testing criteria for designed and manufactured ODDRS.
This part of IEC 62625 includes the list of the requirements specified by IEC 62625-1 and the
relevant acceptance conditions for ODDRS at design review, type test and routine test
phases. For the train level design review and train level test phases, this part provides
guidelines for the conformity testing methods to be applied to the ODDRS installed on the
train.
This part does not cover the conformity assessment schemes that, according to ISO/IEC
Directives Part 2, are the responsibility of ISO policy committee “Committee on conformity
assessment” (ISO/CASCO). Consequently, this part does not include elements related to
conformity assessment aspects other than design review and testing provisions for the
products, processes or services which implements the requirements specified in IEC 62625-1.
This part does not delete, change or interpret the general requirements for conformity
assessment procedures and vocabulary detailed in ISO/IEC 17000.
Elektronische Betriebsmittel für Bahnen - Bordsystem zur Fahrdatenaufzeichnung - Teil 2: Konformitätsprüfungen
Matériel électronique ferroviaire - Système embarqué d'enregistrement de données de conduite - Partie 2: Essais de conformité
L'IEC 62625-2:2016 porte sur les méthodes d'essais normalisées pour la vérification de la conformité de la mise en oeuvre d'un système embarqué d'enregistrement des données de conduite aux exigences spécifiées dans l'IEC 62625-1. De plus, elle porte sur les critères d'essais de conformité des ODDRS conçus et fabriqués. La présente partie de l'IEC 62625 contient la liste des exigences spécifiées par l'IEC 62625-1, ainsi que les conditions d'acceptation correspondantes pour l'ODDRS lors des phases de revue de conception, d'essai de type et d'essai individuel de série. Pour les phases de revue de conception au niveau du train et d'essais au niveau du train, la présente partie donne les lignes directrices relatives aux méthodes d'essais de conformité à appliquer à l'ODDRS installé dans le train.
Železniške elektronske naprave - Sistem registriranja podatkov o vožnji vlaka - 2. del: Preskušanje skladnosti
Ta del standarda IEC 62625 zajema standardizirane preskusne metode za preverjanje skladnosti uvajanja sistema registriranja podatkov o vožnji vlaka z zahtevami, določenimi v standardu IEC 62625-1.
Poleg tega zajema merila za preskušanje skladnosti zasnovanih in izdelanih sistemov registriranja podatkov o vožnji vlaka.
Ta del standarda IEC 62625 vključuje seznam zahtev, določenih v standardu IEC 62625-1, in pogoje ustreznosti za sisteme registriranja podatkov o vožnji vlaka v fazi pregleda zasnove, tipskega preskušanja in rutinskega preskušanja. Za fazo pregleda zasnove na ravni vlaka in preskušanja na ravni vlaka ta del zagotavlja smernice za skladnost preskusnih metod, ki se uporabljajo za sisteme registriranja podatkov o vožnji vlaka, ki so nameščeni na vlaku.
Ta del ne zajema shem ugotavljanja skladnosti, za katere je v skladu z direktivami ISO/IEC, 2. del pooblaščen odbor za pravilnike ISO »Odbor za ugotavljanje skladnosti« (ISO/CASCO). Zato ta del ne vključuje elementov v zvezi z vidiki ugotavljanja skladnosti, razen pregleda zasnove in določb o preskušanju navedenih proizvodov, postopkov ali storitev, ki izvajajo zahteve, določene v standardu IEC 62625-1.
Zato ta del ne preklicuje, spreminja ali razlaga splošnih zahtev za postopke ugotavljanja skladnosti in terminologijo iz standarda ISO/IEC 17000.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62625-2:2017
01-april-2017
Železniške elektronske naprave - Sistem registriranja podatkov o vožnji vlaka - 2.
del: Preskušanje skladnosti
Electronic railway equipment - On board driving data recording system - Part 2:
Conformity testing
Ta slovenski standard je istoveten z: EN 62625-2:2016
ICS:
03.220.30 Železniški transport Transport by rail
45.020 Železniška tehnika na Railway engineering in
splošno general
SIST EN 62625-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62625-2:2017
---------------------- Page: 2 ----------------------
SIST EN 62625-2:2017
EUROPEAN STANDARD EN 62625-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 45.060
English Version
Electronic railway equipment - On board driving data recording
system - Part 2: Conformity testing
(IEC 62625-2:2016)
Matériel électronique ferroviaire - Système embarqué Elektronische Betriebsmittel für Bahnen - Bordsystem zur
d'enregistrement de données de conduite - Partie 2: Essais Fahrdatenaufzeichnung - Teil 2: Konformitätsprüfungen
de conformité (IEC 62625-2:2016)
(IEC 62625-2:2016)
This European Standard was approved by CENELEC on 2016-03-02. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62625-2:2016 E
---------------------- Page: 3 ----------------------
SIST EN 62625-2:2017
EN 62625-2:2016
European foreword
The text of document 9/2081/FDIS, future edition 1 of IEC 62625-2, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62625-2:2016.
The following dates are fixed:
(dop) 2017-03-09
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2019-09-09
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 62625-2:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61025 NOTE Harmonized as EN 61025.
ISO/IEC 9646 (series) NOTE Harmonized as EN 9646 (series).
ISO/IEC 17000 NOTE Harmonized as EN 17000.
2
---------------------- Page: 4 ----------------------
SIST EN 62625-2:2017
EN 62625-2:2016
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60571 - Railway applications - Electronic - -
equipment used on rolling stock
IEC 61375 series Electronic railway equipment - Train EN 61375 series
communication network (TCN) -- Part 1:
General architecture
IEC 62498-1 - Railway applications - Environmental - -
conditions for equipment - Part 1:
Equipment on board rolling stock
IEC 62625-1 2013 Electronic railway equipment - On board EN 62625-1 2013
driving data recording system -- Part 1:
System specification
ISO/IEC 8824 series Information technology -- Abstract Syntax - series
Notation One (ASN.1): Specification of
basic notation
3
---------------------- Page: 5 ----------------------
SIST EN 62625-2:2017
EN 62625-2:2016
Annex ZZ
(informative)
Relationship between this European Standard and the
Essential Requirements of EU Directive 2008/57/EC
This European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association and within its scope the
standard covers all relevant essential requirements as given in Annex lll of the EC Directive
2008/57/EC (also named as New Approach Directive 2008/57/EC Rail Systems: Interoperability).
Once this standard is cited in the Official Journal of the European Union under that Directive and
has been implemented as a national standard in at least one Member State, compliance with the
clauses of this standard given in Table ZZ.1 relating to the ‘rolling stock - locomotives and
passenger rolling stock’ subsystem of the rail system in the European Union, confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding Essential
Requirements of that Directive and associated EFTA regulations.
Table ZZ.1 - Correspondence between this European Standard, the RST LOC&PAS TSI
(published in the Official Journal L 356 on 12 December 2014, p. 228) and Directive
2008/57/EC
Clauses of this Chapter / § / points / Essential Comments
European Standard of RST LOC&PAS TSI Requirements (ER) of
Directive 2008/57/EC
2. Requirements specific
to each sub-subsystem
4.2.9.6 Recording
device
2.4. Rolling Stock
2.4.3. Technical
compatibility
Clauses 1 to 7 are
2.4.4 Controls
applicable
WARNING: Other requirements and other EU Directives may be applicable to the products
falling within the scope of this standard.
4
---------------------- Page: 6 ----------------------
SIST EN 62625-2:2017
IEC 62625-2
®
Edition 1.0 2016-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electronic railway equipment – On board driving data recording system –
Part 2: Conformity testing
Matériel électronique ferroviaire – Système embarqué d'enregistrement de
données de conduite –
Partie 2: Essais de conformité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 45.060 ISBN 978-2-8322-3106-7
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62625-2:2017
– 2 – IEC 62625-2:2016 © IEC 2016
CONTENTS
FOREWORD .5
INTRODUCTION .7
1 Scope .8
2 Normative references .8
3 Terms, definitions, abbreviations, acronyms, and conventions .8
3.1 Terms and definitions .8
3.2 Abbreviations and acronyms .9
4 Conformity testing . 10
4.1 Overview . 10
4.1.1 General . 10
4.1.2 Applicability . 10
4.1.3 Methodology . 10
4.2 Implementation conformity statements . 13
4.2.1 General . 13
4.2.2 FICS and SICS . 13
4.2.3 IXIT . 13
5 Functional requirements conformity testing . 14
5.1 Implementation statement for functional requirements conformity testing . 14
5.1.1 General . 14
5.1.2 Record train data . 14
5.1.3 Ensure on board protection of recorded data . 14
5.1.4 Ensure retrieval of recorded data . 15
5.1.5 Recorded data analysis . 15
5.1.6 List of provided optional functions . 15
5.2 Standardized test methods for functional requirements . 16
6 System requirements conformity testing . 26
6.1 Implementation statement for system requirements conformity testing . 26
6.1.1 General . 26
6.1.2 ODDRS mode . 26
6.1.3 Recording èerformance . 26
6.1.4 Environment . 26
6.1.5 Availability and reliability . 26
6.1.6 Security of records . 27
6.1.7 Maintainability and diagnostic . 27
6.1.8 Recorded data survivability . 27
6.1.9 Recording resolution and frequency . 27
6.1.10 Time of day and date . 28
6.1.11 Train location . 29
6.1.12 The unit of train speed . 29
6.1.13 Input requirements . 29
6.1.14 Software identification and upgrading . 30
6.1.15 Replacement time of ODDR unit . 30
6.1.16 Power consumption . 30
6.1.17 Data interface to subsystems and service interface . 30
6.1.18 Optional mode switching time . 31
---------------------- Page: 8 ----------------------
SIST EN 62625-2:2017
IEC 62625-2:2016 © IEC 2016 – 3 –
6.2 Standardized test methods for system requirements . 31
7 Arrangements for ODDR Unit type test . 44
7.1 Type test with the integrated ODDRS . 44
7.1.1 General . 44
7.1.2 Equivalent signal generator, power supply . 44
7.1.3 Setup of the test environment . 45
Annex A (informative) FICS and SICS structure and instruction . 46
A.1 FICS and SICS pro-forma. 46
A.1.1 General . 46
A.1.2 Abbreviations used in FICS and SICS tables . 46
A.2 FICS and SICS tables . 46
A.2.1 Identification of FICS and SICS . 46
A.2.2 Identification of the implementation under test . 46
A.2.3 Identification of the IUT supplier . 47
A.2.4 Identification of the standards . 47
A.2.5 Global statement of conformity . 48
A.2.6 Level of conformity . 48
A.2.7 FICS and SICS tables structure . 48
Annex B (informative) Methods for testing the parameter values of the protection
capability . 50
B.1 Overview . 50
B.2 General procedure . 50
B.3 Detailed procedure . 50
B.3.1 Protection capability code FA . 50
B.3.2 Protection capability code FB . 51
B.3.3 Protection capability code SA . 51
B.3.4 Protection capability code SB . 52
B.3.5 Protection capability code PA . 52
B.3.6 Protection capability code CA. 52
B.3.7 Protection capability code CB. 53
B.3.8 Protection capability code IA . 53
B.3.9 Protection capability code IB . 53
B.3.10 Protection capability code HA. 54
B.3.11 Protection capability code MA . 54
Bibliography . 55
Figure 1 – Conformity testing process . 11
Figure 2 – Test configurations at the integrated type test . 45
Figure B.1 – Impact shock waveform . 52
Table 1 – FICS pro-forma “Record train data” . 14
Table 2 – FICS pro-forma “Ensure on board protection of recorded data” . 15
Table 3 – FICS pro-forma “Ensure retrieval of recorded data” . 15
Table 4 – FICS pro-forma “Recorded data analysis” . 15
Table 5 – FICS pro-forma “List of provided optional functions” . 15
Table 6 – Standardized test methods for functional requirements . 17
Table 7 – SICS pro-forma “ODDRS mode” . 26
---------------------- Page: 9 ----------------------
SIST EN 62625-2:2017
– 4 – IEC 62625-2:2016 © IEC 2016
Table 8 – SICS pro-forma “Recording performance” . 26
Table 9 – SICS pro-forma “Environment” . 26
Table 10 – SICS pro-forma “Availability and reliability” . 27
Table 11 – SICS pro-forma “Security of records” . 27
Table 12 – SICS pro-forma “Maintainability and diagnostic” . 27
Table 13 – SICS pro-forma “Recorded data survivability”. 27
Table 14 – SICS pro-forma “Recording resolution and frequency” . 28
Table 15 – SICS pro-forma “Time of day and date” . 29
Table 16 – SICS pro-forma “Train location” . 29
Table 17 – SICS pro-forma “The unit of train speed” . 29
Table 18 – SICS pro-forma “Input requirements” . 30
Table 19 – SICS pro-forma “Software identification and upgrading” . 30
Table 20 – SICS pro-forma “Replacement time of ODDR unit” . 30
Table 21 – SICS pro-forma “Power consumption” . 30
Table 22 – SICS pro-forma “Data interface to subsystems and service interface” . 31
Table 23 – SICS pro-forma “Optional mode switching time” . 31
Table 24 – Standardized test methods for system requirements . 32
Table A.1 – FICS and SICS identification table . 46
Table A.2 – IUT identification table . 47
Table A.3 – IUT supplier identification table . 47
Table A.4 – Applicable standards identification table . 47
Table A.5 – Global statement table . 48
Table A.6 – FICS and SICS tables format . 49
---------------------- Page: 10 ----------------------
SIST EN 62625-2:2017
IEC 62625-2:2016 © IEC 2016 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRONIC RAILWAY EQUIPMENT –
ON BOARD DRIVING DATA RECORDING SYSTEM –
Part 2: Conformity testing
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated
in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
Internationals Standard IEC 62625-2 has been prepared by IEC Technical Committee 9:
Electrical equipment and systems for railways.
The text of this standard is based on the following documents:
FDIS Report on voting
9/2081/FDIS 9/2118/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 11 ----------------------
SIST EN 62625-2:2017
– 6 – IEC 62625-2:2016 © IEC 2016
A list of all parts in the IEC 62625 series, published under the general title Electronic railway
equipment – On board driving data recording system, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
---------------------- Page: 12 ----------------------
SIST EN 62625-2:2017
IEC 62625-2:2016 © IEC 2016 – 7 –
INTRODUCTION
In consideration that IEC 62625-1 specifies the ODDRS (On Board Driving Data Recording
System) requirements in terms of functional and system descriptions, a standardized
conformity testing approach was developed in this standard on the base of the ISO/IEC 9646
series standards.
The ISO/IEC 9646 series standards apply to the assessment of communication protocol and
are based on the concept of PICS (Protocol Implementation Conformity Statement) and PIXIT
(Protocol Implementation eXtra Information for Testing). This standard extends the concepts
to functional and system description introducing FICS (Function Implementation Conformity
Statement), SICS (System Implementation Conformity Statement) and IXIT (Implementation
eXtra Information for Testing).
The IEC 62625-1 requirements implementation, formally described by FICS, SICS and IXIT
are verified by design review and other test methods applied to ODDR Unit and ODDRS
installed on the train.
---------------------- Page: 13 ----------------------
SIST EN 62625-2:2017
– 8 – IEC 62625-2:2016 © IEC 2016
ELECTRONIC RAILWAY EQUIPMENT –
ON BOARD DRIVING DATA RECORDING SYSTEM –
Part 2: Conformity testing
1 Scope
This part of IEC 62625 covers the standardized test methods for verifying the compliance of
an On board Driving Data Recording System implementation with the requirements specified
by IEC 62625-1.
Furthermore, it covers the conformity testing criteria for designed and manufactured ODDRS.
This part of IEC 62625 includes the list of the requirements specified by IEC 62625-1 and the
relevant acceptance conditions for ODDRS at design review, type test and routine test
phases. For the train level design review and train level test phases, this part provides
guidelines for the conformity testing methods to be applied to the ODDRS installed on the
train.
This part does not cover the conformity assessment schemes that, according to ISO/IEC
Directives Part 2, are the responsibility of ISO policy committee “Committee on conformity
assessment” (ISO/CASCO). Consequently, this part does not include elements related to
conformity assessment aspects other than design review and testing provisions for the
products, processes or services which implements the requirements specified in IEC 62625-1.
This part does not delete, change or interpret the general requirements for conformity
assessment procedures and vocabulary detailed in ISO/IEC 17000.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document
and are indispensable for its application. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60571, Railway applications – Electronic equipment used on rolling stock
IEC 61375 (all parts), Electronic railway equipment – Train com
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.