GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions

This European Standard gives requirements for acceptance and usage conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non pressurised or pressurised, for use above ground.

Oberirdische GFK-Tanks und Behälter - Teil 1: Ausgangsmaterialien, Spezifikations- und Annahmebedingungen

Diese Europäische Norm gilt für die Anforderungen an die Spezifikation und Annahme von Ausgangsmaterialien für GFK-Tanks und Behälter mit oder ohne Auskleidung, werkmäßig hergestellt oder standortgefertigt, zur oberirdischen Lagerung oder Behandlung von Fluiden (Flüssigkeiten, Dämpfe, Gase), drucklos oder druckbeaufschlagt.

Réservoirs et récipients en PRV pour applications hors sol - Partie 1: Matieres premieres - Conditions de spécifications et conditions d'utilisation

La présente Norme européenne définit les exigences relatives aux conditions de spécification et aux conditions de réception des matieres premieres destinés a la fabrication des réservoirs et récipients en PRV avec ou sans revetement, destinés au stockage ou au traitement de fluides, fabriqués en usine ou sur site, avec ou sans pression, implantés hors sol.

Nadzemni rezervoarji iz armiranega poliestra - 1. del: Osnovni material - Zahteve za specifikacije in prevzemne pogoje

General Information

Status
Withdrawn
Publication Date
30-Nov-2003
Withdrawal Date
14-Nov-2021
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Oct-2021
Due Date
30-Oct-2021
Completion Date
15-Nov-2021

Relations

Buy Standard

Standard
EN 13121-1:2003
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditionsNadzemni rezervoarji iz armiranega poliestra - 1. del: Osnovni material - Zahteve za specifikacije in prevzemne pogojeRéservoirs et récipients en PRV pour applications hors sol - Partie 1: Matieres premieres - Conditions de spécifications et conditions d'utilisationOberirdische GFK-Tanks und Behälter - Teil 1: Ausgangsmaterialien, Spezifikations- und AnnahmebedingungenTa slovenski standard je istoveten z:EN 13121-1:2003SIST EN 13121-1:2003en23.020.10ICS:SLOVENSKI
STANDARDSIST EN 13121-1:200301-december-2003







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13121-1May 2003ICS 23.020.10English versionGRP tanks and vessels for use above ground - Part 1: Rawmaterials - Specification conditions and acceptance conditionsRéservoirs et récipients en PRV pour applications hors sol -Partie 1: Matières premières - Conditions de spécificationset conditions d'utilisationOberirdische GFK-Tanks und -Behälter - Teil 1:Ausgangsmaterialien - Spezifikations- undAnnahmebedingungenThis European Standard was approved by CEN on 17 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13121-1:2003 E



EN 13121-1:2003 (E)2Contents pageForeword.4Introduction.51Scope.52Normative references.53Terms, definitions, symbols and abbreviations.73.1Terms and definitions.73.2Symbols and abbreviations.74Thermosetting resins.84.1General.84.2Unsaturated polyester resins.104.3Vinylester resins.104.4Vinylester urethane resins.104.5Epoxy resins.104.6Furane resins.104.7Phenolic resins.104.8Characterisation of thermosetting resins in the uncured state.104.9Characterisation of thermosetting resins in the cured state.115Curing agents for unsaturated polyester and vinylester resins.115.1General.115.2Initiators.125.3Accelerators, organometallic.125.4Promotors.125.5Inhibitors.126Reinforcing materials.126.1General.126.2Surface nonwovens.126.3Chopped strand mats.136.4Continuous strand mats.136.5Woven fabrics/Woven roving fabrics.136.6Rovings for winding and for chopping applications.137Additives.137.1General.137.2Thixotropic agents.137.3Conductive fillers.147.4Fire retardants.147.5Paraffin wax.147.6Aggregates and fillers.147.7Ultra-violet absorbers.147.8Pigments.147.9Surface active agents.148Thermoplastic lining materials.148.1General.148.2Mechanical and thermal properties.158.3Welding consumables.178.4Dimensional stability.179Material conformance documentation.179.1General.179.2Unsaturated polyester, vinylester and vinylester urethane resins.179.3Epoxy resins and hardeners.179.4Furane and phenolic resins.18



EN 13121-1:2003 (E)39.5Curing agents and additives.189.6Surface nonwovens.189.7Chopped strand mats.189.8Woven fabrics/Woven roving fabrics.189.9Rovings for winding and for chopping applications.189.10Thermoplastic linings.19Annex ZA (informative)
Relationship between this European Standard and the Essential Requirementsof EU Directive 97/23/EC.20Bibliography.21



EN 13121-1:2003 (E)4ForewordThis document (EN 13121-1:2003) has been prepared by Technical Committee CEN/TC 210, "GRP tanks and ves-sels", the secretariat of which is held by DIN.This. European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2003, and conflicting national standards shall be withdrawn at the latestby November 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association and supports essential requirements of EU directive(s).For relationship with EU-Directive(s), see informative Annex ZA, which is an integral part of this document.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.



EN 13121-1:2003 (E)5IntroductionEN 13121 consists of the following parts under the general title "GRP tanks and vessels for use above ground":Part 1 — Raw materials – Specification conditions and acceptance conditionsPart 2 — Composite materials – Chemical resistancePart 3 — Design and workmanshipPart 4 — Delivery, installation and maintenanceThese four Parts together define the responsibilities of the tank or vessel manufacturers, the materials manufactur-ers or suppliers and the purchasers.The design and manufacture of GRP tanks and vessels involve a number of different materials such as resins,plastics and reinforcing fibres and a number of different manufacturing methods. It is implicit that tanks and vesselsconforming to this European Standard should be made only by manufacturers and operators who are competentand suitably equipped to fulfil all requirements, using materials manufactured by competent and experienced mate-rial manufacturers.Part 1 of this standard specifies the requirements for specification conditions and acceptance conditions for rawmaterials — resins, curing agents, thermoplastic linings, reinforcing materials and additives — in terms of bothmaterial technical properties and the manufacturing process. These requirements are necessary in order to estab-lish the chemical resistance properties determined in Part 2 and the mechanical, thermal and design propertiesdetermined in Part 3. Together with the workmanship principles determined in Part 3, specification conditions andacceptance conditions for raw materials ensure that the tank or vessel will be able to meet its design requirements,particularly in terms of its chemical/thermal resistance and pressure and load supporting requirements. Part 4 ofthis standard specifies requirements for delivery, handling and installation and recommendations for maintenanceof GRP tanks and vessels.1 ScopeThis European Standard gives requirements for specification and acceptance conditions of raw materials for GRPtanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non pressur-ised or pressurised, for use above ground.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 59, Glass reinforced plastics — Measurement of hardness by means of a Barcol impressor.EN 10204:1991, Metallic products — Types of inspection documents.prEN 13121-2:1999, GRP tanks and vessels for use above ground — Part 2: Composite materials — Chemicalresistance.prEN 13121-3:2001, GRP tanks and vessels for use above ground — Part 3: Design and workmanship.EN 29092, Textiles — Nonwovens — Definition.EN ISO 75-2, Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite(ISO 75-2:1993).EN ISO 178, Plastics — Determination of flexural properties (ISO 178:2001).



EN 13121-1:2003 (E)6EN ISO 306, Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)(ISO 306:1994).EN ISO 472:2001, Plastics — Vocabulary (ISO 472:1999).EN ISO 527-2, Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusionplastics (ISO 527-2:1993 including Corr 1:1994).EN ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hard-ness) (ISO 868:2003).EN ISO 1133, Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) ofthermoplastics (ISO 1133:1997).EN ISO 1163-1:1999, Plastics — Unplasticized poly (vinyl chloride) (PVC-U) moulding and extrusion materials —Part 1: Designation system and basis for specifications (ISO 1163-1:1995).EN ISO 1675, Plastics — Liquid resins — Determination of density by the pyknometer method (ISO 1675:1985).EN ISO 1889 Reinforcement yarns - Determination of linear density (ISO 1889:1997).EN ISO 2114:2000, Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acidvalue and total acid value (ISO 2114:2000).EN ISO 2535:2002, Plastics — Unsaturated polyester resins — Measurement of gel time at ambient temperature(ISO 2535:2001).EN ISO 2554, Plastics — Unsaturated polyester resins — Determination of hydroxyl value (ISO 2554:1997).EN ISO 2555, Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparentviscosity by the Brookfield Test method (ISO 2555:1989).EN ISO 2592:2001, Determination of flash and fire points -- Cleveland open cup method (ISO 2592:2000).EN ISO 3001, Plastics — Epoxy compounds — Determination of epoxy equivalent (ISO 3001:1999).EN ISO 3219, Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination ofviscosity using a rotational viscometer with defined shear rate (ISO 3219:1993).EN ISO 3251:2003, Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2003).EN ISO 3344, Reinforcement products — Determination of moisture content (ISO 3344:1997).EN ISO 6721-2, Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method(ISO 6721-2:1994, including Technical Corrigendum 1:1995).EN ISO 9073-1, Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area.EN ISO 9073-2,
Textiles - Test methods for nonwovens - Part 2: Determination of thickness (EN ISO 9073-2:1995).EN ISO 9073-3, Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation.EN ISO 9702, Plastics — Amine epoxide hardeners — Determination of primary, secondary and tertiary aminegroup nitrogen content (ISO 9702:1996).EN ISO 9771, Plastics — Phenolic resins — Determination of the pseudo-adiabatic temperature rise of liquid resolswhen cured under acid conditions (ISO 9771:1995).ISO 1183, Plastics — Methods for determining the density and relative density of non-cellular plastics.ISO 1887, Textile glass — Determination of combustible-matter content.ISO 2113, Reinforcement fibres — Woven fabrics — Basis for a specification.ISO 2211, Liquid chemical products — Measurement of colour in Hazen units (platinum-cobalt scale).ISO 2559, Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifi-cations.ISO 2797, Textile glass — Rovings — Basis for a specification.ISO 3374, Reinforcement products – Mats and fabrics — Determination of mass per unit area.ISO 5661, Petroleum products — Hydrocarbon liquids — Determination of refractive index.



EN 13121-1:2003 (E)7ISO 6271, Clear liquids — Estimation of colour by the platinum-cobalt scale.ISO 11359-2, Plastics – Thermomechanical analysis (TMA) – Part 2: Determination of coefficient of linear thermalexpansion and glass transition temperature.3 Terms, definitions, symbols and abbreviations3.1 Terms and definitionsFor the purposes of this European Standard the terms and definitions given in prEN 13121-3:2001 and ENISO 472:2001 apply.3.2 Symbols and abbreviationsFor the purposes of this European Standard, the symbols and abbreviations given in Table 1 apply.Table 1 — Symbols and abbreviationsSymbol/abbreviationUnitAbbreviationHDT°CHeat deflection temperatureMFRg/10 minMelt flow rateTg°CGlass transition temperaturee t%Elongation at break in tensions fMPaFlexural strengths tMPaTensile strengthShD—Shore Hardness Drg/mlDensityEtMPaModulus of elasticity in tensionEfMPaModulus of elasticity in flexure



EN 13121-1:2003 (E)84 Thermosetting resins4.1 GeneralThe resins used for GRP tanks or vessels are liquid or liquefiable, thermosetting in nature and cure by polymerisa-tion (polyaddition or polycondensation) with or without curing agents (initiators, accelerators/promotors).The production procedure and cure schedule of thermosetting resin laminates shall be in accordance with the resinmanufacturer's recommendations. Most thermosetting resins require an elevated temperature post cure to enhancechemical and thermal resistance.Most unsaturated polyester resins and vinyl ester resins may be classified in accordance with Table 2.In order that a specific resin may be given a classification according to Table 2 then the resin manufacturer shallstate that the specific resin conforms with the property requirements given in Table 2 and meets the chemical re-sistance requirements given in prEN 13121-2.When required, flammability and electrical conductivity shall be taken into account.



EN 13121-1:2003 (E)9Table 2 — Classification scheme for UP- and VE-resinsContentof styrenemass-%TgHDTs te t sf°C°CMPa%MPaResingroupResintypeType of glycolsType of acidsmax.min.min.min.min.min.1AUPStandard glycolsa, bOrthophthalic acidEthylenedicarbonxylic acids45
85
60602,0
901BUPStandard glycolsa, bOrthophthalic acidEthylenedicarbonxylic acids45120
90501,5
752AUPStandard glycolsa, bIsophthalic acid, HET acidEthylenedicarbonxylic acids50
85
60602,0
902BUPStandard glycolsaIsophthalic acid, HET acidEthylenedica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.