Bitumen and bituminous binders - Framework for specification of oxidised bitumens

This European Standard provides a framework for the specification of oxidised bitumens used mainly in roofing, waterproofing and adhesives.
Within Europe several types of oxidised bitumens are used and, dependent on climatic conditions, type of building construction and traditional practices, different grades may be used for the same purpose. The framework given in this European standard provides a basis for quality agreements to be established between supplier and client.
The oxidised bitumen products are graded by a combination of the values of ring and ball, softening point and penetration at 25 °C, expressed as multiples of 5.

Bitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen für oxidiertes Bitumen

Diese Europäische Norm legt einen Rahmen für die Anforderungen an oxidierte Bitumen fest, die hauptsächlich in
Dachbelägen, für Abdichtungen und in Klebstoffen verwendet werden.
In Europa werden verschiedene Arten von oxidiertem Bitumen verwendet. Je nach den klimatischen Bedingungen,
der Art der Gebäudekonstruktion und der traditionellen Technik können unterschiedliche Sorten für denselben
Zweck verwendet werden. Der in dieser Norm enthaltene Rahmen liefert eine Grundlage für
Qualitätsvereinbarungen zwischen dem Lieferanten und dem Kunden.
Die Produkte von oxidierten Bitumen werden durch eine Kombination aus den Mittelwerten des
Erweichungspunktes Ring und Kugel und der Penetration bei 25 °C gekennzeichnet, ausgedrückt als Vielfache
von 5.

Bitumes et liants bitumineux - Cadre de spécifications des bitumes oxydés

La présente Norme européenne prescrit un cadre pour les spécifications des bitumes oxydés utilisés principalement dans les toitures, l’étanchéité et les adhésifs. Plusieurs types de bitumes oxydés sont utilisés en Europe, et en fonction des conditions climatiques, du type de construction et des pratiques traditionnelles, des qualités différentes peuvent être utilisées pour des applications similaires. Le cadre indiqué dans la présente norme européenne fournit une base pour les accords portant sur la qualité établis entre client et fournisseur. Les bitumes oxydés sont désignés et classés selon une combinaison des valeurs du point de ramollissement Bille & Anneau et de la pénétrabilité à 25 °C, exprimées par multiples de 5.

Bitumen in bitumenska veziva - Okvirna specifikacija za oksidirane bitumne

General Information

Status
Published
Public Enquiry End Date
04-Jan-2009
Publication Date
11-Jun-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-May-2009
Due Date
30-Jul-2009
Completion Date
12-Jun-2009

RELATIONS

Buy Standard

Standard
SIST EN 13304:2009
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
kSIST prEN 13304:2008
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvirna specifikacija za oksidirane bitumneBitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen für oxidiertes BitumenBitumes et liants bitumineux - Cadre de spécifications des bitumes oxydésBitumen and bituminous binders - Framework for specification of oxidised bitumens91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13304:2009SIST EN 13304:2009en,fr,de01-julij-2009SIST EN 13304:2009SLOVENSKI

STANDARDSIST EN 13304:20031DGRPHãþD
SIST EN 13304:2009

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13304March 2009ICS 75.140; 91.100.50Supersedes EN 13304:2003

English VersionBitumen and bituminous binders - Framework for specification ofoxidised bitumensBitumes et liants bitumineux - Cadre de spécifications desbitumes oxydésBitumen und bitumenhaltige Bindemittel -Spezifikationsrahmen für oxidiertes BitumenThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:

Avenue Marnix 17,

B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13304:2009: ESIST EN 13304:2009

EN 13304:2009 (E) 2 Contents Page Foreword ..............................................................................................................................................................31 Scope ......................................................................................................................................................42 Normative references ............................................................................................................................43 Properties and test methods ................................................................................................................44 Typical grades ........................................................................................................................................5 SIST EN 13304:2009

EN 13304:2009 (E) 3 Foreword This document (EN 13304:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13304:2003

...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvirna specifikacija za oksidirane bitumneBitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen für oxidiertes BitumenBitumes et liants bitumineux - Cadre de spécifications des bitumes oxydésBitumen and bituminous binders - Framework for specification of oxidised bitumens91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:prEN 13304kSIST prEN 13304:2008en,fr,de01-december-2008kSIST prEN 13304:2008SLOVENSKI

STANDARD
kSIST prEN 13304:2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 13304October 2008ICS 75.140; 91.100.50Will supersede EN 13304:2003

English VersionBitumen and bituminous binders - Framework for specification ofoxidised bitumensBitumes et liants bitumineux - Cadre de spécifications desbitumes oxydésBitumen und bitumenhaltige Bindemittel -Spezifikationsrahmen für oxidiertes BitumenThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 336.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 13304:2008: EkSIST prEN 13304:2008

prEN 13304:2008 (E) 2 Contents Page Foreword..............................................................................................................................................................3 1 Scope......................................................................................................................................................4 2 Normative references............................................................................................................................4 3 Properties and test methods................................................................................................................4 4 Typical grades........................................................................................................................................5 Bibliography........................................................................................................................................................6

kSIST prEN 13304:2008

prEN 13304:2008 (E) 3 Foreword This document (prEN 13304:2008) has been prepared b

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.