iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61169-58:2017/AC:2017

(Corrigendum)

Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA) (IEC 61169-58:2016/COR1:2017)

Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA) (IEC 61169-58:2016/COR1:2017)

Hochfrequenz-Steckverbinder - Teil 58: Rahmenspezifikation für koaxiale HF-Steckverbinder mit Blindsteckverbindung - Wellenwiderstand 50 Ω (Typ SBMA) (IEC 61169-58:2016/COR1:2017)

Connecteurs pour fréquences radioélectriques - Partie 58: Spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques à accouplement en aveugle – Impédance caractéristique 50 Ω (type SBMA) (IEC 61169-58:2016/COR1:2017)

Radiofrekvenčni konektorji - 58. del: Področna specifikacija za RF-koaksialne konektorje z "blind-mate" sklopko - Karakteristična impedanca 50 ohm (tip SBMA) - Popravek AC (IEC 61169-58:2016/COR1:2017)

General Information

Status
Published
Publication Date
27-Sep-2017
ICS
33.120.30 - RF connectors
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Sep-2017
Due Date
25-Nov-2017
Completion Date
28-Sep-2017
Ref Project
EN 61169-58:2016/AC:2017-09 - Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA)

Relations

Corrects
SIST EN 61169-58:2017 - Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - characteristic impedance 50 ? (type SBMA) (IEC 61169-58:2016)
Effective Date
05-Sep-2017

Buy Standard

EN 61169-58:2017/AC:2017EN 61169-58:2017/AC:2017
PreviousNext
Corrigendum
EN 61169-58:2017/AC:2017
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.)NRDNVLDOQH&25&25&2533.120.305)RF connectorsICS:Ta slovenski standard je istoveten z:EN 61169-58:2016/AC:2017-09SIST EN 61169-58:2017/AC:2017en01-november-2017SIST EN 61169-58:2017/AC:2017SLOVENSKI
STANDARD



SIST EN 61169-58:2017/AC:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 61169-58:2016/AC:2017-09
September 2017
ICS 33.120.30 English Version
Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 O (type SBMA) (IEC 61169-58:2016/COR1:2017)
Connecteurs pour fréquences radioélectriques - Partie 58: Spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques à accouplement en aveugle - Impédance caractéristique 50 O (type SBMA)(IEC 61169-58:2016/COR1:2017)
Hochfrequenz-Steckverbinder - Teil 58: Rahmenspezifikation für koaxiale HF-Steckverbinder mit Blindsteckverbindung - Wellenwiderstand 50 O (Typ SBMA)(IEC 61169-58:2016/COR1:2017) This corrigendum becomes effective on 15 September 2017 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61169-58
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62037-8:2023(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation (IEC 62037-8:2022)
EN IEC 62037-8:2022

IEC 62037-8:2022 defines a radiated passive intermodulation (PIM) test to determine PIM levels generated by a device or object when it is exposed to RF radiation. This test can be conducted on any material or object and is not limited to devices designed to propagate RF signals. This test can be conducted as either a near field or far field test as defined by the test specification in an outdoor test site or in an anechoic test chamber.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62037-7:2023(Main)
Passive rf and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation (IEC 62037-7:2022)
EN IEC 62037-7:2022

IEC 62037-7:2022 defines test methods for reverse measurement of passive intermodulation (PIM) in systems of RF components deployed in the field. Field PIM measurements can be conducted on RF systems terminated into low PIM loads or on antenna feed systems that broadcast the test signals into the environment.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61169-4:2023(Main)
Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16)
EN IEC 61169-4:2022

IEC 61169-4:2008(E) provides information and rules for the preparation of detail specifications (DS) for type 7-16 R.F. coaxial connectors with  screw lock. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from QC 22000 (IEC 61169-1), applicable to all DS relating to type 7-16 connectors.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61726:2022(Main)
Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:2022)
EN IEC 61726:2022

This standard describes the measurement of screening attenuation by the reverberation chamber measurement method, also called mode stirred chamber method.
This standard is applicable to screening attenuation measurements of cable assemblies, cables, connectors, and passive microwave components, such as waveguides, phase shifters, diplexers/multiplexers, power dividers/combiners and etc.
Modern electronic equipments have shown a demand for methods for testing screening attenuation performance of microwave components over their whole frequency range. Convenient measurement methods have existed for lower frequencies and components of regular shape. These measurement methods are described in IEC 62153 series standards. For much higher frequencies and for components of irregular shape, the reverberation chamber method should be used. Theoretically, the reverberation chamber method has no upper limit of the measurement frequency, but it is limited by the quality and sensitivity of the measurement system, and the lower limit of the measurement frequency is restricted by the size of the reverberation chamber.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61169-71:2022(Main)
Radio-frequency connectors - Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm - Characteristic impedance 50 Ohms - type NEX10® (IEC 61169-71:2022)
EN IEC 61169-71:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connector, typically for use in 50 Ω radio communication systems, type NEX10®.
This document describes mating face dimensions for general purpose connectors - grade 2, dimensional details of standard test connectors-grade 1, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to type NEX10® RF coaxial connectors.
This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.
The type NEX10® RF coaxial connectors are used with all kinds of RF cables and microstrip circuits in radio frequency transmission systems with operating frequencies up to 20 GHz.
NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63138-3:2022(Main)
Multi-channel radio frequency connectors - Part 3: Sectional specification for MQ5 series circular connectors (IEC 63138-3:2022)
EN IEC 63138-3:2022

This part of IEC 63138, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ5 series circular connectors with five RF channels, as well as a detailed specification of the blank format.
An MQ5 series circular connector with 50 Ω nominal impedance has five RF channels that can be engaged and disengaged at the same time. There are two versions of plug connectors, one is a quick-lock version, and the other is a threaded version. The socket connector provides two coupling mechanisms, a quick-lock and a threaded coupling.
MQ5 series circular connectors can be used in mobile communication systems and in other communication equipment.
This document also specifies the mating face dimensions and gauging information of MQ5 series circular connectors, and tests selected from IEC 63138-1, applicable to all detail specifications relating to MQ5 series circular connectors.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61169-17:2022(Main)
Radio-frequency connectors - Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC) (IEC 61169-17:2022)
EN IEC 61169-17:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules
for the preparation of detail specifications (DS) for series TNC RF coaxial connectors with
threaded coupling with a characteristic impedance of 50 Ω.
This document prescribes mating face dimensions for high performance connectors – grade 2,
dimensional details of standard test connectors − grade 0, gauging information and tests
selected from IEC 61169-1, applicable to all detail specifications relating to series TNC RF
connectors.
This document indicates recommended performance characteristics to be considered when
writing a detail specification and it covers test schedules and inspection requirements for
assessment levels M and H.
The series TNC connectors which are used with all kinds of RF cables and microstrips in
microwave transmission systems. The operating frequency is up to 11 GHz.
NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference
purpose only

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63295:2022(Main)
Specification for WB series glass beads with 50Ω impedance for RF connectors (IEC 63295:2022)
EN IEC 63295:2022

This standard provides the requirements of WB series glass beads with 50Ω impedance for RF connectors, including the structure dimensions, IEC type designation, rating and characteristics and quality assessments, etc.
These glass beads are used for adaption of coaxial systems to microstrip circuits extensively in microwave communication systems such as TR modules, power modules, integrated circuits and etc. where hermetic seal is required. They can serve as a part of an RF coaxial connector, multi-channel RF connector or hybrid connector, or can be applied directly in various communication module systems as an independent product. They provide 50Ω normative impedance with operating frequency limit up to 65 GHz.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61169-68:2022(Main)
Radio-frequency connectors - Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors (IEC 61169-68:2022)
EN IEC 61169-68:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series TRK bayonet coupling triaxial connectors. The series TRK bayonet coupling triaxial connectors with the advantages of quick connection and separation, high reliability, small size, good salt characteristics, four polarizations to prevent error-mate etc., can be connected with symmetrically twisted pair cables or triaxial cables. It has been widely used in 1553B data bus systems or other communication systems for digital signal transmission.
It prescribes mating face dimensions for series TRK bayonet coupling triaxial connectors, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series TRK triaxial connectors.
This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.
Note: Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61169-1-5:2022(Main)
Radio frequency connectors - Part 1-5: Electrical test methods - Rise time degradation (IEC 61169-1-5:2022)
EN IEC 61169-1-5:2022

This part of IEC 61169 provides test methods for the rise time degradation of radio frequency
(RF) connector.
This document is applicable to triaxial and other radio frequency connectors.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day