SIST-TS CEN/TS 16665:2014

Standing ladder durability test specification

EN ISO 16665 provides guidelines on the quantitative collection and processing of subtidal soft-bottom macrofaunal samples in marine waters. This International Standard encompasses: a) development of the sampling programme; b) requirements for sampling equipment; c) sampling and sample treatment in the field; d) sorting and species identification; e) storage of collected and processed material.

Prüfung der Dauerhaltbarkeit von Stehleitern

Diese Technische Spezifikation legt ein Prüfverfahren für Leitern fest. Diese Prüfung dient zur Beurteilung der in der Leiternorm festgelegten Eigenschaften.
Diese Technische Spezifikation legt das Prüfverfahren zur Bewertung der Einhaltung der Anforderungen an die Dauerhaltbarkeit von Stehleitern fest.

Caractéristiques des méthodes d’essais de durabilité des échelles autostables (échelles et marchepied)

Specifikacija preskusa odpornosti stoječe lestve

EN ISO 16665 zagotavlja smernice za kvantitativno vzorčenje in obdelavo vzorcev morske makrofavne sedimentnega dna v morskih vodah. Ta mednarodni standard vključuje: a) razvoj programa vzorčenja; b) zahteve opreme za vzorčenje; c) vzorčenje in obdelavo vzorcev na terenu; d) razvrščanje in identifikacijo vrst; e) shranjevanje zbranega in obdelanega materiala.

General Information

• Status: Withdrawn
• Publication Date: 29-May-2014
• Withdrawal Date: 08-Feb-2017
• ICS: 97.145 - Ladders
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 09-Feb-2017
• Due Date: 04-Mar-2017
• Completion Date: 09-Feb-2017
• Directive: 92/59/EEC - General product safety
• Mandate: M/285 - Standardization mandate to CEN relative to the safety of consumers and children: ladders
• Ref Project: CEN/TS 16665:2014 - Standing ladder durability test specification

Relations

• Revised: SIST EN 131-2:2010+A1:2012/kFprA2:2016 - Ladders - Part 2: Requirements, testing, marking
• Effective Date: 27-Jul-2016
• Replaced By: SIST EN 131-2:2010+A2:2017 - Ladders - Part 2: Requirements, testing, marking
• Effective Date: 18-Jan-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16665:2014
01-julij-2014
6SHFLILNDFLMDSUHVNXVDRGSRUQRVWLVWRMHþHOHVWYH
Standing ladder durability test specification
Prüfung der Dauerhaltbarkeit von Stehleitern
Caractéristiques des méthodes d’essais de durabilité des échelles autostables (échelles
et marchepied)
Ta slovenski standard je istoveten z: CEN/TS 16665:2014
ICS:
97.145 Lestve Ladders
SIST-TS CEN/TS 16665:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16665:2014

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16665:2014

TECHNICAL SPECIFICATION
CEN/TS 16665

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
May 2014
ICS 97.145
English Version
Standing ladder durability test specification
Méthode d'essais de la durabilité des échelles Prüfung der Dauerhaltbarkeit von Stehleitern
This Technical Specification (CEN/TS) was approved by CEN on 20 January 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16665:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16665:2014
CEN/TS 16665:2014 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Durability test method .5
4.1 General .5
4.2 Principle .5
4.3 Apparatus .6
4.3.1 General .6
4.3.2 Thrust surface/pad.7
4.3.3 Rigid structure to secure the cylinders and pads position .8
4.3.4 Testing surface . 11
4.3.5 Elastic ropes/tapes . 11
4.4 Test condition . 11
4.4.1 Ambient condition . 11
4.5 Test requirements . 11
4.6 Test procedure . 11
4.7 Test report . 12

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 16665:2014
CEN/TS 16665:2014 (E)
Foreword
This document (CEN/TS 16665:2014) has been prepared by Technical Committee CEN/TC 93 “Ladders”, the
secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 16665:2014
CEN/TS 16665:2014 (E)
Introduction
The use of a CEN Technical Specification has been agreed by CEN/TC 93 to enable further testing and
validation of a standing ladder durability test and ultimately rapid incorporation into EN 131-2.
4

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 16665:2014
CEN/TS 16665:2014 (E)
1 Scope
This Technical Specification specifies the method of the test for the standing ladder durability requirements
evaluation.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 131-1:2007+A1:2011, Ladders - Part 1: Terms, types, functional sizes
EN 10088-2:2005, Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general purposes
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 131-1:2007+A1:2011 and the
following apply.
3.1
ladder collapse
collapse that happens when the defined load value of (1500 ± 50) N is not maintained by the thrust device
3.2
ladder ruptur
...