Field device tool interface specification -- Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2

Communication Profile 3/1 and Communication Profile 3/2 (commonly known as PROFIBUS™1) defines communication profiles based on IEC 61158-2 Type 3, IEC 61158-3-3, IEC 61158-4-3, IEC 61158-5-3, and IEC 61158-6-3. The basic profiles CP 3/1 (PROFIBUS DP) and CP 3/2 (PROFIBUS PA) are defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the PROFIBUS protocol into the FDT interface specification (IEC 62453-2). This part of the IEC 62453 specifies communication and other services. This specification neither contains the FDT specification nor modifies it.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-1: Integration von Kommunikationsprofilen - IEC 61784 Kommunikationsprofile (CP) 3/1 und 3/2

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-1: Intégration des profils de communication - CEI 61784 CP 3/1 et CP 3/2

La CEI 62453-303-1:2009 donne des informations pour intégrer le protocole PROFIBUS dans la spécification d'interface FDT (CEI 62453-2). La présente partie de la CEI 62453 spécifie les services de communication et autres services.

Specifikacija vmesnika orodja procesne naprave - 303-1. del: Integracija komunikacijskih profilov - IEC 61784 CP 3/1 in CP 3/2 (IEC 62453-303-1:2009)

Komunikacijski profil 3/1 in komunikacijski profil 3/2 (splošno znana kot PROFIBUS™1) opredeljujeta komunikacijske profile na osnovi IEC 61158-2, tipa 3, IEC 61158-3-3, IEC 61158-4-3, IEC 61158-5-3 in IEC 61158-6-3. Osnovna profila CP 3/1 (PROFIBUS DP) in CP 3/2 (PROFIBUS PA) sta določena v IEC 61784-1. Ta del IEC 62453 podaja informacije za integriranje protokola PROFIBUS v specifikacijo vmesnika orodja procesne naprave(IEC 62453-2). Ta del IEC 62453 opredeljuje komunikacijo in druge storitve. Ta specifikacija ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.

General Information

Status
Published
Publication Date
15-Dec-2009
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Nov-2009
Due Date
31-Jan-2010
Completion Date
16-Dec-2009

Relations

Buy Standard

Standard
EN 62453-303-1:2010
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62453-303-1:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 303-1. del: Integracija
komunikacijskih profilov - IEC 61784 CP 3/1 in CP 3/2 (IEC 62453-303-1:2009)
Field device tool interface specification -- Part 303-1: Communication profile integration -
IEC 61784 CP 3/1 and CP 3/2
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 303-1: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofile (CP) 3/1 und 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-1:
Intégration des profils de communication - CEI 61784 CP 3/1 et CP 3/2
Ta slovenski standard je istoveten z: EN 62453-303-1:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-303-1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62453-303-1:2010

---------------------- Page: 2 ----------------------

SIST EN 62453-303-1:2010


EUROPEAN STANDARD
EN 62453-303-1

NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.05; 35.110



English version


Field device tool (FDT) interface specification -
Part 303-1: Communication profile integration -
IEC 61784 CP 3/1 and CP 3/2
(IEC 62453-303-1:2009)



Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 303-1: Intégration des profils Teil 303-1: Integration
de communication - von Kommunikationsprofilen -
CEI 61784 CP 3/1 et CP 3/2 Kommunikationsprofile (CP)
(CEI 62453-303-1:2009) 3/1 und 3/2 nach IEC 61784
(IEC 62453-303-1:2009)




This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-303-1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62453-303-1:2010
EN 62453-303-1:2009 - 2 -
Foreword
The text of document 65E/127/FDIS, future edition 1 of IEC 62453-303-1, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-303-1 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-303-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[5] IEC 61158-6 NOTE  Harmonized as EN 61158-6:2004 (not modified).
[7] IEC 61158-5 NOTE  Harmonized as EN 61158-5:2004 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 62453-303-1:2010
- 3 - EN 62453-303-1:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61131-3 2003 Programmable controllers - EN 61131-3 2003
Part 3: Programming languages


IEC 61158 Series Industrial communication networks - EN 61158 Series
Fieldbus specifications


1) 2)
IEC 61158-2 – Industrial communication networks - EN 61158-2 2008
Fieldbus specifications -
Part 2: Physical layer specification and service
definition


1) 2)
IEC 61158-3-3 – Industrial communication networks - EN 61158-3-3 2008
Fieldbus specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements


1) 2)
IEC 61158-4-3 – Industrial communication networks - EN 61158-4-3 2008
Fieldbus specifications -
Part 4-3: Data-link layer protocol specification -
Type 3 elements


1) 2)
IEC 61158-5-3 – Industrial communication networks - EN 61158-5-3 2008
Fieldbus specifications -
Part 5-3: Application layer service definition -
Type 3 elements


1) 2)
IEC 61158-6-3 – Industrial communication networks - EN 61158-6-3 2008
Fieldbus specifications -
Part 6-3: Application layer protocol specification
- Type 3 elements


1) 2)
IEC 61784-1 – Industrial communication networks - Profiles - EN 61784-1 2008
Part 1: Fieldbus profiles


IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance


IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 2009
Part 2: Concepts and detailed description




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 62453-303-1:2010

---------------------- Page: 6 ----------------------

SIST EN 62453-303-1:2010
IEC 62453-303-1
®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD


Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1050-1
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62453-303-1:2010
– 2 – 62453-303-1 © IEC:2009(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviated terms and conventions .9
3.1 Terms and definitions .9
3.2 Symbols and abbreviated terms.9
3.3 Conventions .9
3.3.1 Data type names and references to data types .9
3.3.2 Vocabulary for requirements.9
3.3.3 Use of UML .9
4 Bus category .10
5 Access to instance and device data.10
5.1 Process Channel objects provided by DTM.10
5.2 DTM services to access instance and device data .10
6 Protocol specific behavior.10
6.1 PROFIBUS device model .10
6.2 Configuration and parameterization of PROFIBUS devices.11
6.2.1 General .11
6.2.2 Monolithic DTM for a modular PROFIBUS device .12
6.2.3 Modular DTM for a modular PROFIBUS device.12
6.3 Support for DPV0 configuration .13
6.4 PROFIBUS slaves operating without a cyclic PROFIBUS master .13
6.5 PROFIBUS-related information of a slave DTM .13
6.5.1 General .13
6.5.2 Bus Master Configuration Part (BMCP).14
7 Protocol specific usage of general data types .24
8 Protocol specific common data types.26
9 Network management data types.26
9.1 General .26
9.1.1 Configuration.26
9.1.2 Process Channel .27
9.1.3 Parameterization .27
9.2 Master-bus parameter set.28
9.3 Slave bus parameter set.28
9.4 Module and channel data .29
9.5 GSD information.32
9.5.1 General .32
9.5.2 GSD for gateway devices .32
10 Communication data types .33
10.1 General .33
10.2 Error information provided by Communication Channel .33
10.3 DPV0 communication .33
10.4 DPV1 communication .40
11 Channel parameter data types.43

---------------------- Page: 8 ----------------------

SIST EN 62453-303-1:2010
62453-303-1 © IEC:2009(E) – 3 –
12 Device identification .46
12.1 General .46
12.2 Protocol specific handling of the data type STRING.46
12.3 Common device type identification data types .46
12.4 Topology scan data types.51
12.5 Scan identification data types.52
12.6 Device type identification data types – provided by DTM .54
12.7 Identification information in GUI .57
13 ProfiSafe .57
13.1 Motivation .57
13.2 General parameter handling .57
13.3 ProfiSafe individual device parameter .58
Bibliography.60

Figure 1 – Part 303-1 of the IEC 62453 series .7
Figure 2 – FDT PROFIBUS device model.11
Figure 3 – Example for IO data within datagrams.30
Figure 4 – F-Parameter and individual device parameter .58
Figure 5 – Data structure of ProfiSafe individual device parameters.59

Table 1 – Protocol identifiers .10
Table 2 – Physical layer identifiers.10
Table 3 – BMPC Part1 – General configuration.15
Table 4 – BMPC Part2 – Parameter data .15
Table 5 – BMPC Part3 – Configuration data.16
Table 6 – Part 4: Address table and slave user parameters .17
Table 7 – Part 4: Extended Prm data .17
Table 8 – Complete BMCP.18
Table 9 – Protocol specific usage of general data types.24
Table 10 – Bus parameter set for master device .28
Table 11 – Bus parameter set for slave device.29
Table 12 – Signal channels within the data frame .31
Table 13 – Simple DPV0 communication data types.34
Table 14 – Structured DPV0Communication data types .34
Table 15 – Availability of services for Master Class1 (C1).39
Table 16 – Availability of services for Master Class2 (C2).39
Table 17 – Simple DPV1 communication data types.40
Table 18 – Structured DPV1 communication data types .41
Table 19 – Mapping of DPV1 data types to FDT data types.43
Table 20 – Simple ChannelParameter data types.44
Table 21 – Structured ChannelParameter data types .45
Table 22 – Identification data types with Profibus DP specific mapping.47
Table 23 – Identification data types with Profibus I&M specific mapping .48
Table 24 – Identification data types with Profibus PA specific mapping .50

---------------------- Page: 9 ----------------------

SIST EN 62453-303-1:2010
– 4 – 62453-303-1 © IEC:2009(E)
Table 25 – Simple identification data types with protocol independent semantics.51
Table 26 – Structured identification data types with protocol independent semantics .51
Table 27 – Simple topology scan data types .51
Table 28 – Structured topology scan data types.51
Table 29 – Simple scan identification data types.52
Table 30 – Structured scan identification data types .52
Table 31 – Structured device identification data types.55

---------------------- Page: 10 ----------------------

SIST EN 62453-303-1:2010
62453-303-1 © IEC:2009(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 303-1: Communication profile integration –
IEC 61784 CP 3/1 and CP 3/2


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62453-303-1 been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This part, in conjunction with the other parts of the first edition of the IEC 62453 series
cancels and replaces IEC/PAS 62453-1, IEC/PAS 62453-2, IEC/PAS 62453-3, IEC/PAS
62453-4 and IEC/PAS 62453-5 published in 2006, and constitutes a technical revision.
Each part of the IEC 62453-3xy series is intended to be read in conjunction with IEC 62453-2.

---------------------- Page: 11 ----------------------

SIST EN 62453-303-1:2010
– 6 – 62453-303-1 © IEC:2009(E)
The text of this standard is based on the following documents:
FDIS Report on voting
65E/127/FDIS 65E/140/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 12 ----------------------

SIST EN 62453-303-1:2010
62453-303-1 © IEC:2009(E) – 7 –
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbusses into control systems, there are a few other tasks which
need to be performed. In addition to fieldbus- and device-specific tools, there is a need to
integrate these tools into higher-level system-wide planning- or engineering tools. In
particular, for use in extensive and heterogeneous control systems, typically in the area of the
process industry, the unambiguous definition of engineering interfaces that are easy to use for
all those involved is of great importance.
A device-specific software component, called DTM (Device Type Manager), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kinds of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how IEC 62453–303-1 is aligned in the structure of the IEC 62453 series.
Part 303-1
Communication
profile integration –
IEC 61784 CP 3/1
and CP 3/2
IEC  1127/09

Figure 1 – Part 303-1 of the IEC 62453 series

---------------------- Page: 13 ----------------------

SIST EN 62453-303-1:2010
– 8 – 62453-303-1 © IEC:2009(E)
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 303-1: Communication profile integration –
IEC 61784 CP 3/1 and CP 3/2



1 Scope
Communication Profile 3/1 and Communication Profile 3/2 (commonly known as
1
PROFIBUS™ ) defines communication profiles based on IEC 61158-2 Type 3, IEC 61158-3-3,
IEC 61158-4-3, IEC 61158-5-3, and IEC 61158-6-3. The basic profiles CP 3/1 (PROFIBUS
DP) and CP 3/2 (PROFIBUS PA) are defined in IEC 61784-1.
This part of IEC 62453 provides information for integrating the PROFIBUS protocol into the
FDT interface specification (IEC 62453–2).
This part of the IEC 62453 specifies communication and other services.
This specification neither contains the FDT specification nor modifies it.
2 Normative references
The following referenced documents are indispensable for the application of this specification.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies
IEC 61131-3:2003, Programmable controllers – Part 3: Programming languages
IEC 61158 (all parts), Industrial communication networks – Fieldbus specifications
IEC 61158-2, Industrial communication networks – Fieldbus specifications – Part 2: Physical
layer specification and service definition
IEC 61158-3-3, Industrial communication networks – Fieldbus specifications – Part 3-3: Data-
link layer service definition – Type 3 elements
IEC 61158-4-3 Industrial communication networks – Fieldbus specifications – Part 4-3: Data-
link layer protocol specification – Type 3 elements
IEC 61158-5-3: Industrial communication networks – Fieldbus specifications – Part 5-3:
Application layer service definition – Type 3 elements
IEC 61158-6-3, Industrial communication networks – Fieldbus specifications – Part 6-3:
Application layer protocol specification – Type 3 elements
IEC 61784-1, Industrial communication networks – Profiles – Part 1: Fieldbus profiles
—————————
1
 PROFIBUS™ is a trade names of the non-profit organization PROFIBUS Nutzerorganisation e.V. (PNO). This
information is given for the convenience of users of this International Standard and does not constitute an
endorsement by IEC of the trade name holder or any of its products. Compliance to this standard does not
require use of the registered logos for PROFIBUS™. Use of the registered logos for PROFIBUS™ requires
permission of PNO.

---------------------- Page: 14 ----------------------

SIST EN 62453-303-1:2010
62453-303-1 © IEC:2009(E) – 9 –
IEC 62453-1:2009, Field Device Tool (FDT) interface specification – Part 1: Overview and
guidance
IEC 62453–2:2009, Field Device Tool (FDT) interface specification – Part 2: Concepts and
detailed description
3 Terms, definitions, symbols, abbreviated terms and conventions
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62453–1 and
IEC 62453–2 apply.
3.1.1
bus interface module
module of a field device that provides the connection to the fieldbus
3.1.2
CP 3/1
Communication profile of CPF3, featuring asynchronous transmission; RS 485 (ANSI TIA/EIA
RS-485-A); optional RS 485-IS; plastic fiber; glass multi mode fiber or glass single mode
fiber; PCF fiber
3.1.3
CP 3/2
Communication profile of CPF3, featuring synchronous transmission; manchester coded and
bus powered (MBP); optional intrinsically safe (MBP-IS) and lower power (MBP-LP)
3.2 Symbols and abbreviated terms
For the purposes of this document, the symbols and abbreviations given in IEC 62453–1,
IEC 62453–2 and the following apply.
BIM Bus Interface Module
BMCP Bus Master Configuration Part
GSD General Station Description

3.3 Conventions
3.3.1 Data type names and references to data types
The conventions for naming and referencing of data types are explained in IEC 62453-2,
Clause A.1
3.3.2 Vocabulary for requirements
The following expressions are used when specifying requirements.
Usage of “shall” or “mandatory” No exceptions allowed.
Usage of “should” or “recommended” Strong recommendation. It may make sense in special
exceptional cases to differ from the described behaviour.
Usage of “can’ or “optional’ Function or behaviour may be provided, depending on defined
conditions.
3.3.3 Use of UML
Figures in this docume
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.