SIST EN 1608:2013
(Main)Thermal insulating products for building applications - Determination of tensile strength parallel to faces
Thermal insulating products for building applications - Determination of tensile strength parallel to faces
This European Standard specifies the equipment and procedures for determining the tensile strength of a product parallel to its faces. It is applicable to thermal insulating products. This European Standard can be used to determine whether the product has sufficient strength to withstand stresses during transportation and application.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in Plattenebene
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Zugfestigkeit eines Produkts in seiner Plattenebene fest. Sie gilt für Wärmedämmstoffe. Diese Norm kann verwendet werden um festzustellen, ob das Produkt eine ausreichende Festigkeit besitzt, um den Belastungen bei Transport und Anwendung standzuhalten.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux faces
La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer la
résistance à la traction d'un produit parallèlement à ses faces. Elle s’applique aux produits isolants
thermiques.
La présente Norme européenne peut être utilisée pour déterminer si le produit a une résistance suffisante
pour supporter les contraintes pendant le transport et l'application.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje natezne trdnosti v smeri dolžine
Ta evropski standard določa opremo in postopke za ugotavljanje natezne trdnosti izdelka vzporedno z njegovimi stranmi. Uporablja se za toplotnoizolacijske proizvode. Ta evropski standard se lahko uporablja za določanje, ali ima izdelek zadosti moči, da vzdrži napetost med prevozom in uporabo.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje natezne trdnosti v smeri dolžineWärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in PlattenebeneProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux facesThermal insulating products for building applications - Determination of tensile strength parallel to faces91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 1608:2013SIST EN 1608:2013en,fr,de01-julij-2013SIST EN 1608:2013SLOVENSKI
STANDARDSIST EN 1608:1997/AC:1999SIST EN 1608:19971DGRPHãþD
SIST EN 1608:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1608
March 2013 ICS 91.100.60 Supersedes EN 1608:1996English Version
Thermal insulating products for building applications - Determination of tensile strength parallel to faces
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux faces
Wärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in Plattenebene This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1608:2013: ESIST EN 1608:2013
EN 1608:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle. 5 5 Apparatus . 5 6 Test specimens . 6 7 Procedure . 7 8 Calculation and expression of results . 8 9 Accuracy of measurement . 8 10 Test report . 9
SIST EN 1608:2013
EN 1608:2013 (E) 3 Foreword This document (EN 1608:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1608:1996.
The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building, but it may also be used in other areas where it is relevant. This European test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep SIST EN 1608:2013
EN 1608:2013 (E) 4 EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications — Determination of long-term water absorption by diffusion EN 12089, Thermal insulating product
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje natezne trdnosti v smeri dolžineWärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in PlattenebeneProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux facesThermal insulating products for building applications - Determination of tensile strength parallel to faces91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 1608kSIST FprEN 1608:2012en,fr,de01-september-2012kSIST FprEN 1608:2012SLOVENSKI
STANDARD
kSIST FprEN 1608:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1608
June 2012 ICS 91.100.60 Will supersede EN 1608:1996English Version
Thermal insulating products for building applications - Determination of tensile strength parallel to faces
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux faces
Wärmedämmstoffe für das Bauwesen - Bestimmung der Zugfestigkeit in Plattenebene This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1608:2012: EkSIST FprEN 1608:2012
FprEN 1608:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus .56Test specimens .67Procedure .78Calculation and expression of results .89Accuracy of measurement .810Test report .9 kSIST FprEN 1608:2012
FprEN 1608:2012 (E) 3 Foreword This document (FprEN 1608:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1608:1996.
The revision of this standard contains no major changes only minor corrections and clarifications of editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building, but it may also be used in other areas where it is relevant. This EN test standard is on of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces kSIST FprEN 1608:2012
FprEN 1608:2012 (E) 4 EN 1609, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long-term water
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.