OSIST prEN 10338:2004
(Main)Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions
Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions
1.1 This European Standard applies to hot rolled and cold rolled non-coated steel flat products made of multiphase steels for cold forming of thickness equal to or less than 3 mm.
1.2 If agreed at the time of enquiry and order, this European Standard may also be applied to continuously hot rolled flat products in thicknesses > 3 mm. In this case the mechanical properties and thickness tolerances should also be agreed at the time of enquiry and order.
1.3 These products are delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip.
Kaltgewalzte Flacherzeugnisse aus Mehrphasenstählen zum Kaltumformen - Technische Lieferbedingungen
1.1 Diese Europäische Norm gilt für warm- und kaltgewalzte Flacherzeugnisse ohne Überzug aus Mehr-phasenstählen zum Kaltumformen von Dicken < or = 3 mm.
1.2 Falls zum Zeitpunkt der Anfrage und Bestellung vereinbart, darf diese Europäische Norm auch für kontinuierlich warmgewalzte Flacherzeugnisse > 3 mm Dicke angewendet werden. In diesem Fall sollten die mechanischen Eigenschaften und Dickentoleranzen auch zum Zeitpunkt der Anfrage und Bestellung vereinbart werden.
1.3 Diese Erzeugnisse werden geliefert als Blech, Breitband, längsgeteiltes Breitband oder durch Ablängen von längsgeteiltem Breitband erzeugte Stäbe.
Produits plats laminés a froid en aciers multiphasés pour formage a froid - Conditions techniques de livraison
La présente Norme européenne s’applique aux produits plats laminés à froid ou à chaud non revêtus
en aciers multiphasés pour formage à froid, dont l’épaisseur est inférieure ou égale à 3 mm.
1.2 La présente Norme européenne peut également s’appliquer à des produits plats laminés à chaud en
continu dont l’épaisseur dépasse 3 mm si cela est convenu au moment de l’appel d’offres et de la commande.
Dans ce cas, il convient de se mettre d’accord sur les propriétés mécaniques et les tolérances d’épaisseur au
moment de l’appel d’offres et de la commande.
1.3 Ces produits sont livrés sous forme de tôles, de bandes larges, de bandes larges refendues, ou de
feuilles coupées en longueur à partir d’une bande large refendue.
Cold rolled flat products of multiphase steels for cold forming - Technical delivery conditions
General Information
- Status
- Not Published
- Technical Committee
- IFEK - Ferrous metals
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 15-Jan-2020
- Due Date
- 20-Jan-2020
- Completion Date
- 15-Jan-2020
Relations
- Effective Date
- 28-Jan-2026
Overview
OSIST prEN 10338:2004 specifies the technical delivery conditions for hot rolled and cold rolled non-coated flat products of multiphase steels designed for cold forming applications. Issued by the Slovenian Institute for Standardization (SIST), this European Standard addresses products with a thickness of up to and including 3 mm. By mutual agreement, the standard may also cover hot rolled flat products with thicknesses greater than 3 mm, provided mechanical properties and tolerances are clarified at order.
Multipurpose non-coated flat steel products addressed by this standard are typically delivered in various forms, such as sheet, wide strip, slit wide strip, or cut lengths from slit wide strip, meeting the demands of industries requiring excellent formability and strength characteristics.
Key Topics
Scope of Application
- Hot rolled and cold rolled non-coated flat products for cold forming
- Thickness specification: ≤ 3 mm (with optional extension beyond 3 mm upon agreement)
Product Forms
- Delivered as sheet, wide strip, slit wide strip, or cut lengths
Technical Delivery Conditions
- Requirements for material properties, delivery state, and order agreement parameters
- Conditions for mechanical properties and thickness tolerances for products over 3 mm
Material Type
- Multiphase steels for improved cold forming performance
Order and Agreement Procedures
- Agreement at enquiry and order stage for special product requirements
Applications
Non-coated multiphase steel flat products covered by OSIST prEN 10338:2004 are essential in sectors where high strength, ductility, and cold formability are required. Key practical applications include:
Automotive Industry
- Manufacturing of structural automotive components, body-in-white panels, reinforcements, and safety structures requiring superior strength-to-weight ratios and formability
Appliance and White Goods
- Use in the fabrication of durable, formable panels and internal structures for appliances
Construction and Engineering
- Production of components in building and infrastructure where robust, formable steel is needed
General Cold Forming Processes
- Suitable for stamping, bending, roll forming, and deep drawing operations
The use of multiphase steels helps manufacturers achieve advanced performance requirements while maintaining efficient production processes and reducing overall component weight.
Related Standards
For comprehensive compliance in steel products for cold forming, users should consider referencing the following related standards alongside OSIST prEN 10338:2004:
- EN 10111 - Hot rolled low carbon steel sheets and strips for cold forming
- EN 10130 - Cold rolled low carbon steel flat products for cold forming
- EN 10025 - Hot rolled products of structural steels
- EN 10268 - Cold rolled steel flat products with high yield strength for cold forming
By understanding the requirements outlined in OSIST prEN 10338:2004, manufacturers, engineers, and procurement professionals ensure the optimal performance and reliability of multiphase steel flat products for cold forming, enhancing quality and consistency across industries.
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
OSIST prEN 10338:2004 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions". This standard covers: 1.1 This European Standard applies to hot rolled and cold rolled non-coated steel flat products made of multiphase steels for cold forming of thickness equal to or less than 3 mm. 1.2 If agreed at the time of enquiry and order, this European Standard may also be applied to continuously hot rolled flat products in thicknesses > 3 mm. In this case the mechanical properties and thickness tolerances should also be agreed at the time of enquiry and order. 1.3 These products are delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip.
1.1 This European Standard applies to hot rolled and cold rolled non-coated steel flat products made of multiphase steels for cold forming of thickness equal to or less than 3 mm. 1.2 If agreed at the time of enquiry and order, this European Standard may also be applied to continuously hot rolled flat products in thicknesses > 3 mm. In this case the mechanical properties and thickness tolerances should also be agreed at the time of enquiry and order. 1.3 These products are delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip.
OSIST prEN 10338:2004 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
OSIST prEN 10338:2004 has the following relationships with other standards: It is inter standard links to SIST EN 10169:2011+A1:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
OSIST prEN 10338:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI OSIST prEN 10338:2004
PREDSTANDARD
oktober 2004
Cold rolled flat products of multiphase steels for cold forming - Technical delivery
conditions
ICS 77.140.50 Referenčna številka
OSIST prEN 10338:
...