SIST EN 10265:2025
(Main)Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation
Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation
This document defines the grades of electrical steel strip and sheet with specified mechanical properties and magnetic polarisation. It specifies general requirements, mechanical properties, magnetic polarisation, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures.
This document applies to electrical steel strip and sheet for the construction of poles and rims of rotating electrical machines.
The grades are grouped into two classes according to their manufacturing process:
- hot-rolled grades;
- cold-rolled grades.
NOTE These materials correspond to EN 60404-1:2018, D.2.
Magnetische Werkstoffe - Anforderungen an Elektroband und -blech mit festgelegten mechanischen Eigenschaften und magnetischer Polarisation
Dieses Dokument enthält Stahlsorten für Elektroband- und -blech aus Stahl mit festgelegten mechanischen und magnetischen Eigenschaften. Im Einzelnen sind allgemeine Anforderungen, mechanische Eigenschaften, magnetische Polarisation, geometrische Merkmale, Grenzabmaße und technologische Merkmale, sowie Annahmekriterien festgelegt.
Die vorliegende Norm gilt für Erzeugnisse, die für die Pole und Einfassungen von rotierenden elektrischen Maschinen bestimmt sind.
Die Stahlsorten sind nach Herstellverfahren in zwei Klassen unterteilt:
- Warmgewalzte Stahlsorten;
- Kaltgewalzte Stahlsorten.
ANMERKUNG Diese Erzeugnisse entsprechen EN 60404-1:2017, D.2.
Matériaux magnétiques - Spécification pour les bandes et tôles en acier électrique à caractéristiques mécaniques et polarisation magnétique spécifiées
Le présent document définit les nuances de bandes et de tôles d'acier électrique ayant des caractéristiques mécaniques et une polarisation magnétique spécifiées. Il spécifie les prescriptions générales, les caractéristiques mécaniques, la polarisation magnétique, les caractéristiques géométriques, les tolérances et les caractéristiques technologiques, ainsi que les procédures de contrôle.
Le présent document s’applique aux bandes et tôles en acier électrique pour la construction des pôles et des jantes des machines électriques tournantes.
Les nuances sont regroupées en deux classes selon leur procédé de fabrication :
- nuances laminées à chaud.
- nuances laminées à froid.
NOTE Ces matériaux correspondent à l’EN 60404-1:2017, D.2.
Magnetni materiali - Specifikacija električnih jeklenih trakov in pločevin s specifičnimi mehanskimi lastnostmi in magnetno polarizacijo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Magnetni materiali - Specifikacija električnih jeklenih trakov in pločevin s
specifičnimi mehanskimi lastnostmi in magnetno polarizacijo
Magnetics materials - Specification for electrical steel strip and sheet with specified
mechanical properties and magnetic polarisation
Magnetische Werkstoffe - Anforderungen an Elektroband und -blech mit festgelegten
mechanischen Eigenschaften und magnetischer Polarisation
Matériaux magnétiques - Spécification pour les bandes et tôles en acier électrique à
caractéristiques mécaniques et polarisation magnétique spécifiées
Ta slovenski standard je istoveten z: EN 10265:2024
ICS:
29.030 Magnetni materiali Magnetic materials
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 10265
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 77.140.50 Supersedes EN 10265:1995
English Version
Magnetics materials - Specification for electrical steel strip
and sheet with specified mechanical properties and
magnetic polarisation
Matériaux magnétiques - Spécification pour les bandes Magnetische Werkstoffe - Anforderungen an
et tôles en acier électrique à caractéristiques Elektroband und -blech mit festgelegten mechanischen
mécaniques et polarisation magnétique spécifiées Eigenschaften und magnetischer Polarisation
This European Standard was approved by CEN on 27 October 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10265:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Classification. 7
5 Designation . 7
6 General requirements . 8
6.1 Production process . 8
6.2 Form of supply . 8
6.3 Delivery condition . 8
6.4 Surface condition . 9
6.5 Suitability for cutting . 9
6.6 Suitability for welding . 9
7 Technical requirements . 9
7.1 Mechanical properties . 9
7.2 Magnetic properties . 9
7.3 Geometrical characteristics and tolerances. 11
7.3.1 Thickness . 11
7.3.2 Width . 13
7.3.3 Length. 14
7.3.4 Edge wave (wave factor) . 14
7.3.5 Residual curvature . 14
7.3.6 Edge camber . 15
7.4 Density . 15
8 Inspection . 15
8.1 General. 15
8.2 Selection of samples . 15
8.3 Preparation of test specimens . 16
8.3.1 Mechanical properties . 16
8.3.2 Magnetic properties . 16
8.3.3 Geometrical characteristics and tolerances. 17
8.4 Test method . 17
8.4.1 General. 17
8.4.2 Mechanical properties . 17
8.4.3 Magnetic polarization . 17
8.4.4 Geometrical characteristics and tolerances . 17
8.5 Retests . 17
9 Marking, labelling and packaging . 18
10 Complaints . 18
11 Information to be supplied by the purchaser. 18
Bibliography . 19
European foreword
This document (EN 10265:2024) has been prepared by Technical Committee CEN/TC 459/SC 8 “Steel
sheet and strip for electrical applications”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 10265:1995.
In comparison with the previous edition EN 10265:1995, the following technical modifications have been
made:
— the title of the document has been amended;
— to take into account the revision of the geometrical characterization of EN 10251;
— to include the residual curvature for sheets regarding the internal coil diameter for hot-rolled grades;
— to clarify in the surface condition text how precautions against oxidation can be taken;
— to include in the technical requirements too higher strength new cold-rolled grades;
— to rationalize the tables in the geometrical characteristics and tolerances;
— to clarify the density to be used for the magnetic measurements;
— to reduce the minimum number of Epstein test strips for the magnetic property measurement;
— to add a paragraph on the marking, labelling and packaging;
— to add a clarification on the information to be supplied by the purchaser.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document defines the grades of electrical steel strip and sheet with specified mechanical properties
and magnetic polarization. It specifies general requirements, mechanical properties, magnetic
polarization, geometric characteristics, tolerances and technological characteristics, as well as inspection
procedures.
This document applies to electrical steel strip and sheet for the construction of poles and rims of rotating
electrical machines.
The grades are grouped into two classes according to their manufacturing process:
— hot-rolled grades;
— cold-rolled grades.
NOTE These materials correspond to EN 60404-1:2017, D.2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 10021, General technical delivery conditions for steel products
EN 10027-2, Designation systems for steels — Part 2: Numerical system
EN 10204, Metallic products — Types of inspection documents
EN 10251:2024, Magnetic materials — Methods of determination of the geometrical characteristics of
electrical steel sheet and strip
EN 60404-2, Magnetic materials — Part 2: Methods of measurement of the magnetic properties of electrical
steel strip and sheet by means of an Epstein frame (IEC 60404-2)
EN 60404-4, Magnetic materials — Part 4: Methods of measurement of d.c. magnetic properties of
magnetically soft materials (IEC 60404-4)
EN IEC 60404-13, Magnetic materials — Part 13: Methods of measurement of resistivity, density and
stacking factor of electrical steel strip and sheet (IEC 60404-13)
EN ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature (ISO
6892-1)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
edge wave
wave factor
variation of flatness of a length of strip or sheet tak
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.