SIST EN 16440-2:2023
(Main)Testing methodologies for refrigerating devices for insulated means of transport - Part 2: Eutectic cooling devices
Testing methodologies for refrigerating devices for insulated means of transport - Part 2: Eutectic cooling devices
This European standard applies to eutectic cooling devices which are intended to be used with insulated transport equipment.
The following applications are covered:
• Eutectic cooling devices with or without compressor /condenser unit intended to be installed into
insulated means of transport (e.g. lorries, trailers, swap bodies, other transport containers and
wagons). Charging of the eutectic elements from the liquid to the solid phase may be performed
either by a compressor/condenser unit mounted onto the vehicle or cooled by a stationary direct or indirect system. The eutectic cooling devices are equipped, if relevant, with necessary components for the charging, transmission, cooling and/or with temperature control devices. The eutectic elements can be fitted with or without fans.
• Eutectic cooling devices with independent eutectic elements which have to be charged using external
means.
This standard specifies the testing methodologies.
This standard is only applicable for mono-temperature eutectic cooling devices. This standard does not provide any safety requirements.
Prüfung von Kühleinrichtungen für wärmegedämmte Transportmittel - Teil 2: Eutektische Kühleinrichtungen
Dieses Dokument gilt für eutektische Kühleinrichtungen, die zur Verwendung in wärmegedämmten Transportmitteln vorgesehen sind.
Die folgenden Anwendungen sind abgedeckt:
— Eutektische Kühleinrichtungen mit oder ohne Verdichter-Verflüssigerteil, die für die Installation in wärmegedämmten Transportmitteln vorgesehen sind (z. B. Lastkraftwagen, Anhänger, Wechselauf¬bauten, andere Transporteinrichtungen und Wagen). Das Laden der eutektischen Elemente von flüssiger zu fester Phase kann entweder durch ein auf dem Fahrzeug angebrachtes Verdichter-Verflüssigerteil oder durch ein stationäres direktes oder indirektes System durchgeführt werden. Die eutektischen Kühleinrichtungen sind, sofern zutreffend, mit den notwendigen Komponenten für das Laden, die Transmission, das Kühlen und/oder mit Temperaturregeleinrichtungen ausgestattet. Die eutektischen Elemente können mit oder ohne Ventilatoren installiert werden;
— Eutektische Kühleinrichtungen mit unabhängigen eutektischen Elementen sind nicht Gegenstand dieses Dokuments.
In diesem Dokument werden die Prüfverfahren festgelegt.
Dieses Dokument ist nur für eutektische Kühleinrichtungen mit einer Monotemperatur anzuwenden. Dieses Dokument enthält keine Sicherheitsanforderungen.
Méthodes d'essai des dispositifs de réfrigération des moyens de transport isothermes - Partie 2 : Dispositifs de réfrigération eutectiques
Le présent document est appplicable aux dispositifs de réfrigération eutectiques qui sont destinés à être utilisés avec un équipement de transport isothermes.
Les applications suivantes sont couvertes :
- Les dispositifs de réfrigération eutectiques avec ou sans groupe compresseur/condenseur destinés à être installés dans des moyens de transport isothermes (par exemple, camions, remorques, carrosseries mobiles, autres équipements de transport et wagons). La charge des éléments eutectiques de la phase liquide à la phase solide peut être effectuée soit par un groupe compresseur/condenseur monté sur le véhicule, soit par un système fixe direct ou indirect. Les dispositifs de réfrigération eutectiques sont équipés, le cas échéant, des composants nécessaires pour la charge, la transmission, la réfrigération et/ou de dispositifs de commande de la température. Les éléments eutectiques peuvent être équipés ou non de ventilateurs ;
- Les dispositifs de réfrigération eutectiques avec des éléments eutectiques indépendants ne sont pas couverts par le présent document.
Le présent document spécifie les méthodes d'essai.
Le présent document ne s'applique qu'aux dispositifs de réfrigération eutectiques mono-température. Le présent document ne fournit aucune exigence de sécurité.
Metode za preskušanje hladilnih naprav za toplotno izolirana transportna sredstva - 2. del: Evtektične hladilne naprave
Ta evropski standard se uporablja za evtektične hladilne naprave, ki so namenjene uporabi z izolirano transportno opremo.
Obravnavani so naslednji načini uporabe:
• Evtektične hladilne naprave s kompresorsko/kondenzatorsko enoto ali brez nje, ki so namenjene za vgradnjo v toplotno izolirana transportna sredstva (npr. tovornjake, prikolice, zamenljive nadgradnje, druge transportne zabojnike in vagone). Polnjenje evtektičnih elementov iz tekoče v trdno fazo se lahko opravi
s kompresorsko/kondenzatorsko enoto, vgrajeno v vozilo, ali pa se hladi s stacionarnim neposrednim ali posrednim sistemom. Evtektične hladilne naprave so po potrebi opremljene s potrebnimi komponentami za polnjenje, prenašanje, hlajenje in/ali z napravami za uravnavanje temperature. Evtektični elementi so lahko opremljeni z ventilatorji ali brez njih.
• Evtektične hladilne naprave z neodvisnimi evtektičnimi elementi, ki jih je treba polniti z zunanjimi
sredstvi.
Ta standard določa preskusne metodologije.
Ta standard se uporablja le za enotemperaturne evtektične hladilne naprave. Ta standard ne podaja nobenih varnostnih zahtev.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16440-2:2023
01-september-2023
Metode za preskušanje hladilnih naprav za toplotno izolirana transportna sredstva
- 2. del: Evtektične hladilne naprave
Testing methodologies for refrigerating devices for insulated means of transport - Part 2:
Eutectic cooling devices
Prüfung von Kühleinrichtungen für wärmegedämmte Transportmittel - Teil 2: Eutektische
Kühleinrichtungen
Méthodes d'essai des dispositifs de réfrigération des moyens de transport isothermes -
Partie 2 : Dispositifs de réfrigération eutectiques
Ta slovenski standard je istoveten z: EN 16440-2:2023
ICS:
27.200 Hladilna tehnologija Refrigerating technology
SIST EN 16440-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16440-2:2023
---------------------- Page: 2 ----------------------
SIST EN 16440-2:2023
EN 16440-2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 27.200
English Version
Testing methodologies for refrigerating devices for
insulated means of transport - Part 2: Eutectic cooling
devices
Méthodes d'essai des dispositifs de réfrigération des Prüfung von Kühleinrichtungen für wärmegedämmte
moyens de transport isothermes - Partie 2 : Dispositifs Transportmittel - Teil 2: Eutektische
de réfrigération eutectiques Kühleinrichtungen
This European Standard was approved by CEN on 10 April 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16440-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 16440-2:2023
EN 16440-2:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 General terms and definitions . 5
3.2 Terms and definitions for eutectic units with fans only . 9
3.3 Typical setups for direct and indirect eutectic cooling devices . 9
3.4 Symbols and uncertainties . 11
4 Requirements . 12
4.1 General. 12
4.2 Description of the eutectic cooling devices and eutectic units . 12
4.3 Test equipment . 12
4.3.1 General requirements . 12
4.3.2 Requirements for the calorimeter box .
...
SLOVENSKI STANDARD
oSIST prEN 16440-2:2020
01-julij-2020
Metode za preskušanje hladilnih naprav za toplotno izolirana transportna sredstva
- 2. del: Evtektične hladilne naprave
Testing methodologies for refrigerating devices for insulated means of transport - Part 2:
Eutectic cooling devices
Prüfung von Kühleinrichtungen für wärmegedämmte Transportmittel - Teil 2: Eutektische
Kühleinrichtungen
Méthodes d'essai des dispositifs de réfrigération des moyens de transport isothermes -
Partie 2: Dispositifs de réfrigération eutectiques
Ta slovenski standard je istoveten z: prEN 16440-2
ICS:
27.200 Hladilna tehnologija Refrigerating technology
oSIST prEN 16440-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16440-2:2020
---------------------- Page: 2 ----------------------
oSIST prEN 16440-2:2020
DRAFT
EUROPEAN STANDARD
prEN 16440-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 27.200
English Version
Testing methodologies for refrigerating devices for
insulated means of transport - Part 2: Eutectic cooling
devices
Méthodes d'essai des dispositifs de réfrigération des Prüfung von Kühleinrichtungen für wärmegedämmte
moyens de transport isothermes - Partie 2: Dispositifs Transportmittel - Teil 2: Eutektische
de réfrigération eutectiques Kühleinrichtungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 413.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16440-2:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16440-2:2020
prEN 16440-2:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions, symbols and uncertainties . 4
3.1 Terms and definitions . 4
3.2 Symbols and uncertainties . 10
4 Requirements . 11
4.1 General. 11
4.2 Description of the eutectic cooling devices and eutectic units . 11
4.3 Test equipment . 11
4.4 Installation and connection of the eutecti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.