SIST EN ISO 17654:2003

Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003)

This standard specifies the pressure test method to be applied to seam welded specimens of different types of material, e.g. uncoated and coated ferritic steels and uncoated austenitic steel sheet with single sheet thicknesses ranging form 0,3 mm to 3,2 mm.

Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen - Widerstandsscheweißen - Innendruckprüfung an Widerstandsrollennahtschweißungen (ISO 17654:2003)

Diese Norm beschreibt die Druckprüfung von rollennahtgeschweißten Proben aus verschiedenen Werkstoffsorten, z.B. unbeschichtete und beschichtete ferritische Stähle und unbeschichteten austenitischen Stahlblechen mit Einzelblechdicken im Bereich von 0,3 mm bis 3,2 mm.

Essais destructifs des soudures sur matériaux métalliques - Soudage par résistance - Essai de pression des soudures par résistance a la molette (ISO 17654:2003)

La présente norme spécifie la méthode d'essai sous pression a appliquer a des éprouvettes soudées a la molette constituées de différents types de matériaux, tels que les aciers ferritiques non revetus ou revetus et les aciers austénitiques non revetus sous forme de tôle mince, d'épaisseur comprise entre 0,3 mm et 3,2 mm.

Porušitveni preskusi na zvarih na kovinskih materialih - Elektrouporovno varjenje - Tlačni preskus uporovnih kolutnih zvarov (ISO 17654:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2003
• Withdrawal Date: 20-Sep-2011
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Sep-2011
• Due Date: 13-Oct-2011
• Completion Date: 21-Sep-2011
• Ref Project: EN ISO 17654:2003 - Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003)

Relations

• Replaced By: SIST EN ISO 17654:2011 - Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
• Effective Date: 01-Nov-2011
• Replaced By: SIST EN ISO 17654:2011 - Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17654:2003
01-december-2003
3RUXãLWYHQLSUHVNXVLQD]YDULKQDNRYLQVNLKPDWHULDOLK(OHNWURXSRURYQRYDUMHQMH
7ODþQLSUHVNXVXSRURYQLKNROXWQLK]YDURY,62
Destructive tests on welds in metallic materials - Resistance welding - Pressure test on
resistance seam welds (ISO 17654:2003)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Widerstandsscheweißen - Innendruckprüfung an Widerstandsrollennahtschweißungen
(ISO 17654:2003)
Essais destructifs des soudures sur matériaux métalliques - Soudage par résistance -
Essai de pression des soudures par résistance a la molette (ISO 17654:2003)
Ta slovenski standard je istoveten z: EN ISO 17654:2003
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 17654:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17654:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 17654:2003
EUROPEAN STANDARD
EN ISO 17654
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 25.160.40
English version
Destructive tests on welds in metallic materials - Resistance
welding - Pressure test on resistance seam welds (ISO
17654:2003)
Essais destructifs des soudures sur matériaux métalliques - Zerstörende Prüfung von Schweißverbindungen an
Soudage par résistance - Essai de pression des soudures metallischen Werkstoffen - Widerstandsscheweißen -
par résistance à la molette (ISO 17654:2003) Innendruckprüfung an Widerstandsrollennahtschweißungen
(ISO 17654:2003)
This European Standard was approved by CEN on 21 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17654:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17654:2003
EN ISO 17654:2003 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Purpose of test.4
5 Test specimens .4
5.1 Requirements .4
5.2 Dimensions.4
5.3 Number of test specimens.5
6 Test equipment and test procedure.5
7 Test report .6
2

---------------------- Page: 4 ----------------------

SIST EN ISO 17654:2003
EN ISO 17654:2003 (E)
Foreword
This document (EN ISO 17654:2003) has been prepared by Technical Committee CEN/TC 121, "Welding", the
secretariat of which is held by DS, in collaboration with ISO/TC 44 "Welding and allied processes".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2003, and
...