SIST EN ISO 9692-2:2024

Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:2024)

This part of IS0 9692 applies to types of joint preparation for submerged arc welding with one wire electrode (process 121 according to IS0 4063) on steel.
This part of IS0 9692 covers only the welding positions PA and PB according to IS0 6947. In case PC is used, special preparation will be necessary.
It applies to fully penetrated welds. For partly penetrated welds, types of joint preparation, shapes and dimensions may differ from the listed proposals if they are specified in the relevant application standard or agreed by parties concerned.
If the root is welded by a different arc welding process (see IS0 40631, the joint preparation according to IS0 9692 should be taken into account.

Schweißen und verwandte Verfahren - Schweißnahtvorbereitung - Teil 2: Unterpulverschweißen von Stahl (ISO 9692-2:2024)

Dieses Dokument gilt für die Arten der Schweißnahtvorbereitung zum Unterpulverschweißen mit einer Drahtelektrode (Prozess 121 nach ISO 4063) für Stahl.
Dieses Dokument bezieht sich nur auf die Schweißpositionen PA und PB nach ISO 6947. Wenn PC angewendet wird, ist eine besondere Vorbereitung notwendig.
Dieses Dokument gilt für volldurchschweißte Nähte. Bei teilweise durchgeschweißten Nähten können die Art der Schweißnahtvorbereitung, Formen und Maße von den aufgeführten Vorschlägen abweichen, wenn diese in der entsprechenden Anwendungsnorm oder in einer Vereinbarung zwischen den beteiligten Vertragspartnern festgelegt sind.

Soudage et techniques connexes - Préparation de joints - Partie 2: Soudage à l'arc sous flux en poudre des aciers (ISO 9692-2:2024)

La présente partie de I'ISO 9692 specific les types de préparation de joints pour soudage sous flux avec fil-electrode sur acier (procede 121 conformement a I'ISO 4063).
La présente partie de I'ISO 9692 couvre seulement les positions de soudage PA et PB conformément a I'ISO 6947. Lorsque la position PC est utilisee, une preparation speciale doit etre adoptee.
Elle est applicable aux soudures a pleine pénétration. Dans le cas de soudures a pénétration partielle, les types de preparation de joints, les formes et dimensions peuvent etre differents de ceux des exemples proposes ici s'ils sont specifies dans la norme d'application correspondante ou s'ils font I'objet d'un accord entre les parties concernees.
Si la racine est soudee avec un procede de soudage different (voir IS0 4063), il est recommande que la preparation du joint conformement a I'ISO 9692 soit prise en compte.

Varjenje in sorodni postopki - Priprava zvarnih stikov - 2. del: Varjenje jekel pod praškom (ISO 9692-2:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Dec-2023
• ICS: 25.160.10 - Welding processes
• ICS: 25.160.40 - Welded joints and welds
• ICS: 77.080.20 - Steels
• Technical Committee: VAR - Welding
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Apr-2024
• Due Date: 28-Jun-2024
• Ref Project: EN ISO 9692-2:2024 - Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:2024)

Relations

• Replaces: SIST EN ISO 9692-2:1999/AC:1999 - Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998)
• Effective Date: 01-Jun-2024
• Replaces: SIST EN ISO 9692-2:1999 - Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998)
• Effective Date: 01-Jun-2024

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 9692-2:2023
01-november-2023
Varjenje in sorodni postopki - Priprava zvarnih stikov - 2. del: Varjenje jekel pod
praškom (ISO/FDIS 9692-2:2023)
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of
steels (ISO/FDIS 9692-2:2023)
Schweißen und verwandte Verfahren - Schweißnahtvorbereitung - Teil 2:
Unterpulverschweißen von Stahl (ISO/FDIS 9692-2:2023)
Soudage et techniques connexes - Préparation de joints - Partie 2: Soudage à l'arc sous
flux en poudre des aciers (ISO/FDIS 9692-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 9692-2
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
25.160.40 Varjeni spoji in vari Welded joints and welds
77.080.20 Jekla Steels
oSIST prEN ISO 9692-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9692-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9692-2:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 9692-2
ISO/TC 44/SC 7
Welding and allied processes — Joint
Secretariat: BSI
preparation —
Voting begins on:
2023-09-13
Part 2:
Voting terminates on:
Submerged arc welding of steels
2023-12-06
Soudage et techniques connexes — Préparation de joints —
Partie 2: Soudage à l'arc sous flux en poudre des aciers
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 9692-2:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9692-2:2023
ISO/FDIS 9692-2:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 9692-2
ISO/TC 44/SC 7
Welding and allied processes — Joint
Secretariat: BSI
preparation —
Voting begins on:
Part 2:
Voting terminates on:
Submerged arc welding of steels
Soudage et techniques connexes — Préparation de joints —
Partie 2: Soudage à l'arc sous flux en poudre des aciers
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 9692-2:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9692-2:2023
ISO/FDIS 9692-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials .
...