Plastics - Cellulose acetate -- Determination of insoluble particles

Specifies a test method for determinig the number of insoluble and visible particles including all impurties and foreign particles in cellulose acetate. A test portion is dissolved in a mixture of dichloromethane, methanol and dimethylphthalate. Counting of all visible particles with a diameter greater than 0,15 mm in a square area with a side length of 25 mm.

Plastiques -- Acétate de cellulose -- Détermination des particules insolubles

La présente Norme internationale prescrit une méthode pour la détermination du nombre de particules visibles (y compris toutes les impuretés et corps étrangers) de l'acétate de cellulose, insolubles dans un mélange constitué de phtalate de diméthyle, de dichlorométhane et de méthanol, et de dimensions égales ou supérieures à 0,15 mm.La méthode est applicable aux acétates de cellulose ayant un titre en acide acétique supérieur à 50 % et qui ne contiennent pas d'additifs pouvant affecter les résultats de l'essai.

Polimerni materiali - Acetat celuloze - Določanje števila netopnih delcev

General Information

Status
Withdrawn
Publication Date
31-May-1996
Withdrawal Date
30-Apr-2000
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2000
Due Date
01-May-2000
Completion Date
01-May-2000

Relations

Buy Standard

Standard
ISO 1598:1990 - Plastics - Cellulose acetate -- Determination of insoluble particles
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1598:1996
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 1598:1990 - Plastiques -- Acétate de cellulose -- Détermination des particules insolubles
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1598:1990 - Plastiques -- Acétate de cellulose -- Détermination des particules insolubles
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ISO
INTERNATIONAL
1598
STANDARD
Second edi tion
1990-09- 15
--_--- ----.- -_-- __p_Ip_p__I --- _--- ---
Cellulose acetate - Determination of
Plastics -
insoluble particles
- Determination des particules
Plastiques - Acefafe de cellulose
insolubles
Reference number
ISO 1598:1990(E)

---------------------- Page: 1 ----------------------
ISO 1598:1990(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Interna-
tional Standard requires approval by at least 75 % of the member bodies
casting a vote.
International Standard ISO 1598 was prepared by Technical Committee
ISO/TC 61, Plastics.
This second edition cancels and replaces the fit-st edition
(ISO 1598:1975), of which it constitutes a minor revision.
0 ISO 1990
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 + Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD
ISO 1598:1990(E)
Plastics - Cellulose acetate - Determination of insoluble
particles
WARNING - The use of this international Standard may invoive hazardous materiais, operations and
equipment. This Standard does not purport to address all of the safety Problems associated with its use.
It is the responsibiiity of the user of this Standard to estabiish appropriate safety and heaith practices
and determine the appiicabiiity of reguiatory iimitations Prior to use.
3 Principle
1 Scope
This International Standard specifies a method for A solution is prepared by addition of a solvent to the
the determination of the number of visible pat-ticles cellulose acetate, and the visible, undissolved parti-
(including all kinds of contamination and black dir?) cles in this Solution, of a size equal to or larger than
a Standard reference particle of specified size, are
in cellulose acetate which are insoluble in a mixture
counted.
of dimethylphthalate, dichloromethane and meth-
anol, and are of size 0,15 mm or larger.
This method is intended for cellulose acetate having
4 Reagents
an acetic acid yield above 50 % and containing no
additives which affect the test results.
During the determination, use only reagents of re-
cognized analytical grade, free from insoluble parti-
cles.
4.1 Dichioromethane, &i 1,321 to 1,331, not less
than 95 % (V/v) distilling between 39 “C and
2 Normative references
40,5 “C at 1 013 mbar (760 mmHg).
SAFETY PRECAUTIONS - Dichioromethane is
The following Standards contain provisions which,
harmfui by inhaiation. Avoid contact with the skin.
through reference in this text, constitute provisions
of this International Standard. At the time of publi-
cation, the editions indicated were valid. All stan-
4.2 Methanol, & 0,792 to 0,795, distillation range
dards are subject to revision, and Parties to
64,5 “C to 65,5 “C at a pressure of 1 013 mbar
agreements based on this International Standard
(760 mmHg).
are encouraged to investigate the possibility of ap-
plying the most recent editions of the Standards in-
SAFETY PRECAUTIONS - Methanol is highiy
dicated below. Members of IEC and ISO maintain
fiammabie and toxic by inhaiation or if swaiiowed.
registers of currently valid International Standards.
Keep the Container tightiy ciosed and away from
sources of ignition. DO not smoke. Avoid contact
ISO 565:1990, Test sieves - Metal wire cloth, perfo-
with the skin.
rafed mefal plate and electroformed sheet - Nomina
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastiques -- Acétate de cellulose -- Détermination des particules insolublesPlastics - Cellulose acetate -- Determination of insoluble particles83.080.20PlastomeriThermoplastic materialsICS:Ta slovenski standard je istoveten z:ISO 1598:1990SIST ISO 1598:1996en01-junij-1996SIST ISO 1598:1996SLOVENSKI
STANDARD



SIST ISO 1598:1996



INTERNATIONAL STANDARD ISO 1598 Second edi tion 1990-09- 15 --_--- ----.- -_-- __p_Ip_p__I --- _--- --- Plastics - Cellulose acetate - Determination of insoluble particles Plastiques - Acefafe de cellulose - Determination des particules insolubles Reference number ISO 1598:1990(E) SIST ISO 1598:1996



ISO 1598:1990(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Interna- tional Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 1598 was prepared by Technical Committee ISO/TC 61, Plastics. This second edition cancels and replaces the fit-st edition (ISO 1598:1975), of which it constitutes a minor revision. 0 ISO 1990 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 + Switzerland Printed in Switzerland ii SIST ISO 1598:1996



INTERNATIONAL STANDARD ISO 1598:1990(E) Plastics - Cellulose acetate - Determination of insoluble particles WARNING - The use of this international Standard may invoive hazardous materiais, operations and equipment. This Standard does not purport to address all of the safety Problems associated with its use. It is the responsibiiity of the user of this Standard to estabiish appropriate safety and heaith practices and determine the appiicabiiity of reguiatory iimitations Prior to use. 1 Scope This International Standard specifies a method for the determination of the number of visible pat-ticles (including all kinds of contamination and black dir?) in cellulose acetate which are insoluble in a mixture of dimethylphthalate, dichloromethane and meth- anol, and are of size 0,15 mm or larger. This method is intended for cellulose acetate having an acetic acid yield above 50 % and containing no additives which affect the test results. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the editions indicated were valid. All stan- dards are subject to revision, and Parties to agreements based on this International Standard are encouraged to investigate the possibility of ap- plying the most recent editions of the Standards in- dicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 565:1990, Test sieves - Metal wire cloth, perfo- rafed mefal plate and electroformed sheet - Nominal sizes of openings. ISO 585:-‘1 , Plasfics - Unplasticized cellulose acet- ate - Determination of moisture content. 3 Principle A solution is prepared by addition of a solvent to the cellulose acetate, and the visible, undissolved parti- cles in this Solution, of a size equal to or larger than a Standard reference particle of specified size, are counted. 4 Reagents During the determination, use only reagents of re- cognized analytical gr
...

ISO
NORME
INTERNATIONALE
1598
Deuxième édition
1990-09-l 5
Plastiques - Acétate de cellulose -
Détermination des particules insolubles
Plastics - Cellulose acetate - Determination of insoluble particles
Numéro de référence
ISO 1598: 1990(F)

---------------------- Page: 1 ----------------------
ISO 1598:1990(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CH) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 1598 a été élaborée par le comité techni-
que ISO/TC 61, Plastiques.
Cette deuxième édition annule et remplace la première édition
(ISO 1598:1975), dont elle constitue une révision mineure.
0 ISO 1990
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 1598:1990(F)
Plastiques - Acétate de cellulose - Détermination des
particules insolubles
AVERTISSEMENT - La présente Norme internationale peut comporter des matériaux, des opérations
et un équipement à risques. Elle n’a pas pour but de répondre à tous les problèmes de sécurité associés
à son utilisation. Il est de la responsabilité de l’utilisateur qui applique la présente Norme internationale
de consulter et d’établir les mesures appropriées de sécurité et de santé et de déterminer I’applicabilité
de leurs limites avant sa mise en oeuvre.
ISO 585:-l) , Plastiques - Acétate de cellulose non
1 Domaine d’application
plastifié - Détermination de I’humidité.
La présente Norme internationale prescrit une mé-
thode pour la détermination du nombre de particu-
3 Principe
les visibles (y compris toutes les impuretés et corps
étrangers) de l’acétate de cellulose, insolubles dans
Une solution est préparée par adjonction d’un mé-
un mélange constitué de phtalate de diméthyle, de
lange de solvant à une prise d’essai d’acétate de
dichlorométhane et de méthanol, et de dimensions
cellulose et les particules visibles non dissoutes,
égales ou supérieures à 0,15 mm.
dont les dimensions sont supérieures ou égales à
une particule témoin de dimensions prescrites, sont
La méthode est applicable aux acétates de cellulose
dénombrées.
ayant un titre en acide acétique supérieur à 50 */o
et qui ne contiennent pas d’additifs pouvant affecter
les résultats de l’essai.
4 Réactifs
Au cours de l’essai, utiliser uniquement des réactifs
de qualité analytique reconnue et exempts de parti-
2 Références normatives
cules visibles.
Les normes suivantes contiennent des dispositions
qui, par suite de la référence qui en est faite,
4.1 Dichlorométhane, & 1,321 à 1,331, et dont
constituent des dispositions valables pour la pré-
95 % en volume, au minimum, distillent entre 39 OC
sente Norme internationale. Au moment de la ~LJ-
et 40,5 OC, sous une pression de 1013 mbar
blication, les éditions indiquées étaient en vigueur.
(760 mmHg).
Toute norme est sujette à révision et les parties
PRÉCAUTIONS DE SÉCURITÉ - Le dichlorométhane
prenantes des accords fondés sur la présente
est nocif par inhalation. Éviter le contact avec la
Norme internationale sont invitées à rechercher la
peau.
possibilité d’appliquer les éditions les plus récentes
des normes indiquées ci-après. Les membres de la
CEI et de I’ISO possèdent le registre des Normes
4.2 Méthanol, &i 0,792 à 0,795, intervalle de distil-
internationales en vigueur à un moment donné.
lation 64,5 “C à 65,5 OC, sous une pression de
1 013 mbar (760 mmHg).
ISO 565:1990, Tamis de contrôle - Tissus métalli-
tôles métalliques perforées et feuilles PRÉCAUTIONS DE SÉCURITÉ - Le méthanol est très
ques,
élec troformées - Dimensions nominales des ouv
...

ISO
NORME
INTERNATIONALE
1598
Deuxième édition
1990-09-l 5
Plastiques - Acétate de cellulose -
Détermination des particules insolubles
Plastics - Cellulose acetate - Determination of insoluble particles
Numéro de référence
ISO 1598: 1990(F)

---------------------- Page: 1 ----------------------
ISO 1598:1990(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CH) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 1598 a été élaborée par le comité techni-
que ISO/TC 61, Plastiques.
Cette deuxième édition annule et remplace la première édition
(ISO 1598:1975), dont elle constitue une révision mineure.
0 ISO 1990
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 1598:1990(F)
Plastiques - Acétate de cellulose - Détermination des
particules insolubles
AVERTISSEMENT - La présente Norme internationale peut comporter des matériaux, des opérations
et un équipement à risques. Elle n’a pas pour but de répondre à tous les problèmes de sécurité associés
à son utilisation. Il est de la responsabilité de l’utilisateur qui applique la présente Norme internationale
de consulter et d’établir les mesures appropriées de sécurité et de santé et de déterminer I’applicabilité
de leurs limites avant sa mise en oeuvre.
ISO 585:-l) , Plastiques - Acétate de cellulose non
1 Domaine d’application
plastifié - Détermination de I’humidité.
La présente Norme internationale prescrit une mé-
thode pour la détermination du nombre de particu-
3 Principe
les visibles (y compris toutes les impuretés et corps
étrangers) de l’acétate de cellulose, insolubles dans
Une solution est préparée par adjonction d’un mé-
un mélange constitué de phtalate de diméthyle, de
lange de solvant à une prise d’essai d’acétate de
dichlorométhane et de méthanol, et de dimensions
cellulose et les particules visibles non dissoutes,
égales ou supérieures à 0,15 mm.
dont les dimensions sont supérieures ou égales à
une particule témoin de dimensions prescrites, sont
La méthode est applicable aux acétates de cellulose
dénombrées.
ayant un titre en acide acétique supérieur à 50 */o
et qui ne contiennent pas d’additifs pouvant affecter
les résultats de l’essai.
4 Réactifs
Au cours de l’essai, utiliser uniquement des réactifs
de qualité analytique reconnue et exempts de parti-
2 Références normatives
cules visibles.
Les normes suivantes contiennent des dispositions
qui, par suite de la référence qui en est faite,
4.1 Dichlorométhane, & 1,321 à 1,331, et dont
constituent des dispositions valables pour la pré-
95 % en volume, au minimum, distillent entre 39 OC
sente Norme internationale. Au moment de la ~LJ-
et 40,5 OC, sous une pression de 1013 mbar
blication, les éditions indiquées étaient en vigueur.
(760 mmHg).
Toute norme est sujette à révision et les parties
PRÉCAUTIONS DE SÉCURITÉ - Le dichlorométhane
prenantes des accords fondés sur la présente
est nocif par inhalation. Éviter le contact avec la
Norme internationale sont invitées à rechercher la
peau.
possibilité d’appliquer les éditions les plus récentes
des normes indiquées ci-après. Les membres de la
CEI et de I’ISO possèdent le registre des Normes
4.2 Méthanol, &i 0,792 à 0,795, intervalle de distil-
internationales en vigueur à un moment donné.
lation 64,5 “C à 65,5 OC, sous une pression de
1 013 mbar (760 mmHg).
ISO 565:1990, Tamis de contrôle - Tissus métalli-
tôles métalliques perforées et feuilles PRÉCAUTIONS DE SÉCURITÉ - Le méthanol est très
ques,
élec troformées - Dimensions nominales des ouv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.