EN ISO 1598:1999

Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)

Specifies a test method for determinig the number of insoluble and visible particles including all impurties and foreign particles in cellulose acetate. A test portion is dissolved in a mixture of dichloromethane, methanol and dimethylphthalate. Counting of all visible particles with a diameter greater than 0,15 mm in a square area with a side length of 25 mm.

Kunststoffe - Celluloseacetat - Bestimmung der unlöslichen Bestandteile (ISO 1598:1990)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Anzahl sichtbarer Teilchen der Größe 0,15 mm und darüber in Celluloseacetat (einschließlich aller Arten von Verunreinigungen und schwarzem Schmutz) fest, welche sich in einem Gemisch von Dimethylphthalat, Dichlormethan und Methanol nicht auflösen, und ein Maß von 0,15 mm oder größer haben. Dieses Verfahren ist für Celluloseacetat mit einem Essigsäuregehalt von mindestens 50 % und ohne Zusatzstoffe, die das Prüfergebnis beeinflussen, vorgesehen.

Plastiques - Acétate de cellulose - Détermination des particules insolubles (ISO 1598:1990)

La présente Norme internationale prescrit une méthode pour la détermination du nombre de particules visibles (y compris toutes les impuretés et corps étrangers) de l'acétate de cellulose, insolubles dans un mélange constitué de phtalate de diméthyle, de dichlorométhane et de méthanol, et de dimensions égales ou supérieures à 0,15 mm.La méthode est applicable aux acétates de cellulose ayant un titre en acide acétique supérieur à 50 % et qui ne contiennent pas d'additifs pouvant affecter les résultats de l'essai.

Polimerni materiali - Acetat celuloze - Določanje števila netopnih delcev (ISO 1598:1990)

General Information

• Status: Published
• Publication Date: 22-Jun-1999
• Withdrawal Date: 30-Dec-1999
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Jun-1999
• Completion Date: 23-Jun-1999
• Ref Project: SIST EN ISO 1598:2000 - Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1598:2000
01-maj-2000
3ROLPHUQLPDWHULDOL$FHWDWFHOXOR]H'RORþDQMHãWHYLODQHWRSQLKGHOFHY,62

Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)
Kunststoffe - Celluloseacetat - Bestimmung der unlöslichen Bestandteile (ISO
1598:1990)
Plastiques - Acétate de cellulose - Détermination des particules insolubles (ISO
1598:1990)
Ta slovenski standard je istoveten z: EN ISO 1598:1999
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 1598:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1598:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 1598:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 1598:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 1598:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 1598:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 1598:2000
ISO
INTERNATIONAL
1598
STANDARD
Second edi tion
1990-09- 15
--_--- ----.- -_-- __p_Ip_p__I --- _--- ---
Cellulose acetate - Determination of
Plastics -
insoluble particles
- Determination des particules
Plastiques - Acefafe de cellulose
insolubles
Reference number
ISO 1598:1990(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 1598:2000
ISO 1598:1990(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Interna-
tional Standard requires approval by at least 75 % of the member bodies
casting a vote.
International Standard ISO 1598 was prepared by Technical Committee
ISO/TC 61, Plastics.
This second edition cancels and replaces the fit-st edition
(ISO 1598:1975), of which it constitutes a minor revision.
0 ISO 1990
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 + Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 1598:2000
INTERNATIONAL STANDARD
ISO 1598:1990(E)
Plastics - Cellulose acetate - Determination of insoluble
particles
WARNING - The use of this international Standard may invoive hazardous materiais, operations and
equipment. This Standard does not purport to address all of the safety Problems associated with its use.
It is the responsibiiity of the user of this Standard to estabiish appropriate safety and heaith practices
and determine the appiicabiiity of reguiatory iimitations Prior to use.
3 Principle
1 Scope
This International Standard specifies a method for A solution is prepared by addition of a solvent to the
the determination of the number of visible pat-ticles cellulose acetate, and the visible, undissolved parti-
(including all kinds of contamination and black dir?) cles in this Solution, of a size equal to or larger than
a Standard reference particle of specified size, are
in cellulose acetate which are insoluble in a mixture
counted.
of dimethylphthalate, dichloromethane and meth-
anol, and are of size 0,15 mm or larger.
This method is intended for cellulose acetate having
4 Reagents
an acetic acid yield above 50 % and containing no
additives which affect the test results.
During the determination, use only reagents of re-
cognized analytical grade, free from insoluble parti-
cles.
4.1 Dichioromethane, &i 1,321 to 1,331, not less
than 95 % (V/v) distilling between 39 “C and
2 Normative references
40,5 “C at 1 013 mbar (760 mmHg).
SAFETY PRECAUTIONS - Dichioromethane is
The following Standards contain provisions which,
harmfui by inhaiation. Avoid contact with the skin.
through reference in this text, constitute provisions
of this International Standard. At the time of publi-
cation, the editions indicated were valid. All stan-
4.2 Methanol, & 0,792 to 0,795, distillation range
dards are subject to revision, and Parties to
64,5 “C to 65,5 “C at a pressu
...