SIST EN 62629-1-2:2014
(Main)3D Display devices - Part 1-2: Generic - Terminology and letter symbols
3D Display devices - Part 1-2: Generic - Terminology and letter symbols
This part of IEC 62629 provides a list of the terminologies that are frequently used in describing 3D display technologies in the IEC 62629 series. Terms for various 3D display technologies on stereoscopic, autostereoscopic, volumetric, and holographic displays are included.
/
Dispositifs d'affichage 3D - Partie 1-2 : Généralités - Terminologie et symboles littéraux
La CEI 62629-1-2:2013 fournit une liste des terminologies fréquemment utilisées pour décrire les technologies d'affichage 3D dans la série CEI 62629. Les termes relatifs aux diverses technologies d'affichage 3D portant sur les écrans stéréoscopiques, autostéréoscopiques, volumétriques et holographiques sont inclus.
3D-prikazovalniki - 1-2. del: Generično - Terminologija in črkovni simboli (IEC 62629-1-2:2013)
Ta del standarda IEC 62629 podaja seznam terminologije, ki se pogosto uporablja pri opisovanju tehnologij 3D-prikazovalnikov v seriji standardov IEC 62629. Vključeni so termini za različne tehnologije stereoskopičnih, avtostereoskopičnih, volumetričnih in holografskih 3D-prikazovalnikov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62629-1-2:2014
01-maj-2014
'SULND]RYDOQLNLGHO*HQHULþQR7HUPLQRORJLMDLQþUNRYQLVLPEROL,(&
3D Display devices - Part 1-2: Generic - Terminology and letter symbols
/
Dispositifs d'affichage 3D - Partie 1-2 : Généralités - Terminologie et symboles littéraux
Ta slovenski standard je istoveten z: EN 62629-1-2:2013
ICS:
01.075 Simboli za znake Character symbols
33.160.99 Druga avdio, video in Other audio, video and
avdiovizuelna oprema audiovisual equipment
SIST EN 62629-1-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62629-1-2:2014
---------------------- Page: 2 ----------------------
SIST EN 62629-1-2:2014
EUROPEAN STANDARD
EN 62629-1-2
NORME EUROPÉENNE
August 2013
EUROPÄISCHE NORM
ICS 31.120; 31.260
English version
3D Display devices -
Part 1-2: Generic -
Terminology and letter symbols
(IEC 62629-1-2:2013)
Dispositifs d'affichage 3D - 3D-Anzeigen – Teil 1-2: Allgemein –
Partie 1-2 : Généralités - Terminologie und Buchstabensymbole
Terminologie et symboles littéraux (IEC 62629-1-2:2013)
(CEI 62629-1-2:2013)
This European Standard was approved by CENELEC on 2013-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62629-1-2:2013 E
---------------------- Page: 3 ----------------------
SIST EN 62629-1-2:2014
EN 62629-1-2:2013 - 2 -
Foreword
The text of document 110/470/FDIS, future edition 1 of IEC 62629-1-2, prepared by IEC/TC 110
"Electronic display devices" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62629-1-2:2013.
The following dates are fixed:
(dop) 2014-05-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-08-01
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62629-1-2:2013 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62629-12-1 NOTE Harmonised as EN 62629-12-1.
IEC 62629-22-1 NOTE Harmonised as EN 62629-22-1.
---------------------- Page: 4 ----------------------
SIST EN 62629-1-2:2014
IEC 62629-1-2
®
Edition 1.0 2013-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
3D display devices –
Part 1-2: Generic – Terminology and letter symbols
Dispositifs d'affichage 3D –
Partie 1-2: Généralités – Terminologie et symboles littéraux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX P
ICS 31.120; 31.260 ISBN 978-2-83220-914-1
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 62629-1-2:2014
– 2 – 62629-1-2 © IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Terms and definitions . 5
2.1 General terms . 5
2.2 Terms related to components . 6
2.3 Terms related to performance specifications. 7
Annex A (informative) Definition guideline for terms which include “image”, “view” or
“vision” . 9
Annex B (informative) Classification of 3D display types . 12
Annex C (informative) Relation between depth perception and 3D display . 14
Annex D (informative) Lobe . 15
Bibliography . 16
Figure A.1 – Difference between “image” and “view” . 9
Figure A.2 – Structure of multi-view display . 10
Figure A.3 – Stereoscopic images and stereoscopic views . 11
Figure B.1 – Classification of 3D display . 13
Figure C.1 – Depth perception and 3D display . 14
Figure D.1 – Lobe of autostereoscopic display . 15
---------------------- Page: 6 ----------------------
SIST EN 62629-1-2:2014
62629-1-2 © IEC:2013 - 3-
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
3D DISPLAY DEVICES –
Part 1-2: Generic –
Terminology and letter symbols
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62629-1-2 has been prepared by IEC technical committee 110:
Electronic display devices.
The text of this standard is based on the following documents:
FDIS Report on voting
110/470/FDIS 110/479/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 62629 series, under the general title 3D display devices, can
be found on the IEC website.
---------------------- Page: 7 ----------------------
SIST EN 62629-1-2:2014
– 4 – 62629-1-2 © IEC:2013
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
---------------------- Page: 8 ----------------------
SIST EN 62629-1-2:2014
62629-1-2 © IEC:2013 - 5-
3D DISPLAY DEVICES –
Part 1-2: Generic –
Terminology and letter symbols
1 Scope
This part of IEC 62629 provides a list of the terminologies that are frequently used in
describing 3D display technologies in the IEC 62629 series. Terms for various 3D display
technologies on stereoscopic, autostereoscopic, volumetric, and holographic displays are
included.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1 General terms
2.1.1
3D display
display device giving depth perception with physiological depth cues
Note 1 to entry: Physiological depth cues include accommodation, convergence, binocular parallax, and motion
parallax. The 3D display provides users with all or some of the physiological depth cues so that they can perceive
depth. Physiological depth cues should be distinguished from pictorial depth cues which can also be provided by
the usual 2D displays. Pictorial depth cues are features in an image that give a hint of the depth. Examples of
pictorial depth cues are texture gradient, shadow, occlusion, and vanishing lines.
2.1.2
stereoscopic display
3D display providing binocular parallax
Note 1 to entry: See “autostereoscopic display”. For classification of the 3D displays, see Annex B.
2.1.3
autostereoscopic display
stereoscopic display that requires no viewing aids
Note 1 to entry: See “stereoscopic display”. For classification of the 3D displays, see Annex B.
2.1.4
two-view display
two-view autostereoscopic display
autostereoscopic display providing one stereoscopic view
Note 1 to entry: See “multi-view display”.
2.1.5
multi-view display
multi-view autostereoscopic display
autostereoscopic display providing multiple stereoscopic views
Note 1 to entry: See “two-view display”.
---------------------- Page: 9 ----------------------
SIST EN 62629-1-2:2014
– 6 – 62629-1-2 © IEC:2013
2.1.6
integral imaging display
integral imaging autostereoscopic display
autostereoscopic display that reproduces ray space
2.1.7
volumetric display
autostereoscopic display which forms a set of pixels distributed in space
2.1.8
stereoscopic image
pair of images with parallax shown on a stereoscopic display
Note 1 to entry: Stereoscopic images are made by capturing images of an object from slightly different positions
and they are used as output of a stereoscopic display. See Annex A.
2.1.9
stereoscopic view
pair of sights provided by a stereoscopic display, which induce stereopsis
Note 1 to entry: Stereoscopic view is generally not the same as stereoscopic image. In some cases more than a
single monocular image is projected on the retina of an eye. See Annex A.
2.1.10
monocular image
one par
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.