SIST EN 60061-1:1999/A26:2002

Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit -- Teil 1: Lampensockel

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité -- Partie 1: Culots de lampes

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Vznožki in okovi sijalk skupaj s kalibri za nadzorovanje izmenljivosti in varnosti – 1. del: Vznožki sijalk (IEC 60061-1:1969/A26:2001)

General Information

• Status: Published
• Publication Date: 30-Nov-2002
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2002
• Due Date: 01-Dec-2002
• Completion Date: 01-Dec-2002
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60061-1:1993/A26:2001 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Relations

• Amends: SIST EN 60061-1:1999 - Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
• Effective Date: 01-Dec-2002

Overview

EN 60061-1:1993/A26:2001 is a European adoption of IEC requirements covering lamp caps (light bulb bases) and the gauges used to control their interchangeability and safety. Published as part of the IEC/EN 60061 series and incorporated by CLC (published in the Slovenian edition as SIST EN 60061-1:1999/A26:2002), this amendment (A26) updates Part 1 of the series. The standard defines the general principles and requirements that ensure lamp caps are mechanically and electrically compatible and safe for use with corresponding lamp holders.

Note: full and updated content for the IEC/EN 60061 series is available by subscribing to the IEC 60061 Database.

Key Topics and Requirements

The document focuses on technical and safety aspects that support reliable interchangeability of lamps and holders. Key topics include:

• Scope and definitions relevant to lamp caps and their intended use
• Dimensional requirements and tolerances to ensure mechanical fit between caps and holders
• Electrical safety considerations for secure contact, insulation, and prevention of hazardous conditions
• Material and construction guidance for durability, heat resistance, and electrical isolation
• Test methods and gauges used to verify compliance with interchangeability and safety criteria
• Marking and identification to facilitate correct specification, replacement, and traceability
• Conformity and inspection practices for manufacturers and test laboratories

The standard sets performance-oriented requirements and prescribes the use of gauges and tests to verify that lamp caps will operate safely and interchangeably with corresponding holders.

Applications

EN 60061-1:1993/A26:2001 is practical for stakeholders across the lighting value chain:

• Lamp and lamp cap manufacturers - to design and produce bases that meet accepted interchangeability and safety criteria
• Lamp holder and fixture manufacturers - to ensure compatibility with standard lamp caps
• Testing laboratories and conformity assessors - to apply gauges and tests for certification and quality control
• Electrical installers, specifiers and procurement professionals - to select compliant products and reduce compatibility risks
• Regulatory and standards bodies - for alignment with regional safety and interoperability requirements

Keywords: EN 60061-1:1993/A26:2001, lamp caps, lamp holders, interchangeability, safety, IEC 60061, gauges, light bulb base, lighting industry compliance.

Related Standards

• IEC/EN 60061 series (other parts cover lamp holders, gauges and related items)
• National adoptions and amendments (e.g., SIST EN 60061-1:1999/A26:2002)

For the complete technical requirements, testing procedures and up-to-date amendments, subscribe to the IEC 60061 Database or consult the CLC national standard body.

Standards Content (Sample)

SLOVENSKI SIST EN 60061-
1:1999/A26:2002
STANDARD
december 2002
Lamp caps and holders together with gauges for the control of interchangeability
and safety – Part 1: Lamp caps - Amendment A26 (IEC 60061-1:1969/A26:2001)
ICS 29.140.10 Referenčn
...