SIST EN 60400:2018/A1:2021

Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017/A1:2020)

NEXT ACTION: HAS consultant to confirm TC successfully addressed comments after negative PUB assessment.
2020-08-12 NEXT ACTION: TC ACTION BY 2020-09-30
2020-08-12 TC to provide elements for assessment at PUB
20200325: consultant assessment missing. Document block until the document is approved by the consultant.

Lampenfassungen für röhrenförmige Leuchtstofflampen und Starterfassungen (IEC 60400:2017/A1:2020)

Douilles pour lampes tubulaires à fluorescence et douilles pour starters (IEC 60400:2017/A1:2020)

Okovi za cevaste fluorescenčne sijalke in starterski okovi - Dopolnilo A1 (IEC 60400:2017/A1:2020)

General Information

• Status: Published
• Publication Date: 18-May-2021
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-May-2021
• Due Date: 19-Jul-2021
• Completion Date: 19-May-2021
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: EN 60400:2017/A1:2021 - Lampholders for tubular fluorescent lamps and starterholders

Relations

• Amends: SIST EN 60400:2018 - Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017)
• Effective Date: 20-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60400:2018/A1:2021
01-julij-2021
Okovi za cevaste fluorescenčne sijalke in starterski okovi - Dopolnilo A1 (IEC
60400:2017/A1:2020)
Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017/A1:2020)
Lampenfassungen für röhrenförmige Leuchtstofflampen und Starterfassungen (IEC
60400:2017/A1:2020)
Douilles pour lampes tubulaires à fluorescence et douilles pour starters (IEC
60400:2017/A1:2020)
Ta slovenski standard je istoveten z: EN 60400:2017/A1:2021
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60400:2018/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60400:2018/A1:2021

---------------------- Page: 2 ----------------------
SIST EN 60400:2018/A1:2021


EUROPEAN STANDARD EN 60400:2017/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2021
ICS 29.140.10

English Version
Lampholders for tubular fluorescent lamps and starterholders
(IEC 60400:2017/A1:2020)
Douilles pour lampes tubulaires à fluorescence et douilles Lampenfassungen für röhrenförmige Leuchtstofflampen und
pour starters Starterfassungen
(IEC 60400:2017/A1:2020) (IEC 60400:2017/A1:2020)
This amendment A1 modifies the European Standard EN 60400:2017; it was approved by CENELEC on 2020-03-31. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60400:2017/A1:2021 E

---------------------- Page: 3 ----------------------
SIST EN 60400:2018/A1:2021
EN 60400:2017/A1:2021 (E)
European foreword
The text of document 34B/2072/FDIS, future IEC 60400/A1, prepared by SC 34B "Lamp caps and
holders" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60400:2017/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-11-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-05-07
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 60400:2017/A1:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61347-1:2015 NOTE Harmonized as EN 61347-1:2015 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN 60400:2018/A1:2021
EN 60400:2017/A1:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60061-2 - Lamp caps and holders together with - -
gauges for the control of interchangeability
and safety -- Part 2: Lampholders
IEC 60061-3 - Lamp caps and holders together with EN 60061-3 -
gauges for the control of interchangeability
and safety -- Part 3: Gauges
IEC 60068-2-20 2008 Environmental testing - Part 2-20: Tests - EN 60068-2-20 2008
Test T: Test methods for solderability and
resistance to soldering heat of devices with
leads

IEC 60068-2-75 2014 Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60081 - Double-capped fluorescent lamps - EN 60081 1998-
Performance specifications
   + A1 2002
   + A2 2003
   + A3 2005
   + A4 2010
   + A5 2013
   + A6 2017
   + A11 2018
IEC 60112 2003 Method for the determination of the proof EN 60112 2003
and the comparative tracking indices of
solid insulating materials
+ A1 2009  + A1 2009

3

---------------------- Page: 5 ----------------------
SIST EN 60400:2018/A1:2021
EN 60400:2017/A1:2021 (E)
IEC 60352-1 1997 Solderless connections -- Part 1: Wrapped EN 60352-1 1997
connections - General requirements, test
methods and practical guidance
IEC 60399 - Barrel thread for lampholders with shade EN 60399 2004
holder ring
   + A1 2008
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
- -  + corrigendum May 1993
+ A1 1999  + A1 2000
+ A2 2013  + A2 2013
IEC 60598-1 - Luminaires -- Part 1: General requirements EN 60598-1 2015-
and tests
   + A1 2018
IEC 60695-2-11 2000 Fire hazard testing -- Part 2-11: EN 60695-2-11 2014
Glowing/hot-wire based test methods -
Glow-wire flammability test method for
end-products
IEC 60695-11-5 2016 Fire hazard testing - Part 11-5: Test flames EN 60695-11-5 2017
- Needle-flame test method - Apparatus,
confirmatory test arrangement and
guidance
ISO 4046-4 2016 Paper, board, pulps and related terms - - -
Vocabulary - Part 4: Paper and board
grades and converted products
4

---------------------- Page: 6 ----------------------
SIST EN 60400:2018/A1:2021
EN 60400:2017/A1:2021 (E)
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European standard has been prepared under a Commission’s standardisation request relating to
harmonised standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 — Correspondence between this European standard and Annex I of Directive
2014/35/EU [2014 OJ L96]
Safety objectives of Directive Clause(s) / sub-clause(s)
Remarks / Notes
2014/35/EU of this EN
1. General conditions
a) the essential characteristics, the Clause 8
recognition and observance of which
will ensure that electrical equipment
will be used safely and in applications
for which it was made, shall be marked
on the electrical equipment, or, if this is
not possible, on an accompanying
document;
b) the electrical equipment, together All clauses
with its component parts, shall be
made in such a way as to ensure that it
can be safely and properly assembled
and connected;
c) the electrical equipment shall be so See item 2 and 3 of this table
designed and manufactured as to
ensure that protection against the
hazards set out in points 2 and 3 is
assured, providing that the equipment
is used in applications for which it was
made and is adequately maintained.
2. Protection against hazards arising
from the electrical equipment
Measures of a technical nature shall be
laid down in accordance with point 1, in
order to ensure that:
a) persons and domestic animals are Clauses 4, 9, 10, 11, 12 and
adequately protected against the 16
danger of physical injury or other harm
5

---------------------- Page: 7 ----------------------
SIST EN 60400:2018/A1:2021
EN 60400:2017/A1:2021 (E)
which might be caused by direct or
indirect contact;
b) temperatures, arcs or radiation Clauses 11, 12, 14, 17 and
which would cause a danger, are not 18

produced;

c) persons, domestic animals and Clauses 4, 11
...