SIST ISO 3402:2023

Tobacco and tobacco products - Atmosphere for conditioning and testing

This document specifies the atmosphere for the conditioning and testing of samples of tobacco and tobacco products.
It is primarily applicable to cigarettes; however, if not specified differently in other ISO standards, it can also be applied to tobacco, other tobacco products, and materials used in the manufacture of tobacco products for which prior conditioning is necessary. Standards for the conditioning and testing of other forms of tobacco, tobacco products, and materials can refer to all or part of this document.

Tabac et produits du tabac - Atmosphère de conditionnement et d'essai

Le présent document spécifie l'atmosphère de conditionnement et d'essai à laquelle sont soumis les échantillons de tabac et de produits du tabac.
Il s’applique principalement aux cigarettes ; toutefois, sauf spécification différente dans d’autres normes ISO, elle peut aussi être appliquée au tabac, aux autres produits du tabac et aux matières utilisées dans la fabrication des produits du tabac pour lesquels un conditionnement préalable est nécessaire. Les normes relatives au conditionnement et aux essais d’autres formes de tabac, de produits du tabac et de matières peuvent faire référence à tout ou partie du présent document.

Tobak in tobačni proizvodi - Pogoji za kondicioniranje in preskušanje

Ta dokument določa atmosfero za kondicioniranje in preskušanje vzorcev tobaka in tobačnih izdelkov.
Uporablja se predvsem za cigarete; če v drugih standardih ISO ni drugače določeno, pa se lahko uporablja tudi za tobak, druge tobačne izdelke in materiale, ki se uporabljajo pri proizvodnji tobačnih izdelkov, za katere je potrebno predhodno kondicioniranje. Standardi za kondicioniranje in preskušanje drugih oblik tobaka, tobačnih izdelkov in materialov se lahko v celoti ali delno sklicujejo na ta dokument.

General Information

• Status: Published
• Publication Date: 12-Mar-2023
• ICS: 65.160 - Tobacco, tobacco products and related equipment
• Technical Committee: TIT - Tobaco and tobaco products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Mar-2023
• Due Date: 11-May-2023
• Completion Date: 13-Mar-2023
• Ref Project: ISO 3402:2023 - Tobacco and tobacco products — Atmosphere for conditioning and testing

Relations

• Revises: SIST ISO 3402:2000 - Tobacco and tobacco products -- Atmosphere for conditioning and testing
• Effective Date: 06-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 3402:2023
01-april-2023
Tobak in tobačni proizvodi - Pogoji za kondicioniranje in preskušanje
Tobacco and tobacco products - Atmosphere for conditioning and testing
Tabac et produits du tabac - Atmosphère de conditionnement et d'essai
Ta slovenski standard je istoveten z: ISO 3402:2023
ICS:
65.160 Tobak, tobačni izdelki in Tobacco, tobacco products
oprema and related equipment
SIST ISO 3402:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 3402:2023

---------------------- Page: 2 ----------------------
SIST ISO 3402:2023
INTERNATIONAL ISO
STANDARD 3402
Fifth edition
2023-01
Tobacco and tobacco products —
Atmosphere for conditioning and
testing
Tabac et produits du tabac — Atmosphère de conditionnement et
d'essai
Reference number
ISO 3402:2023(E)
© ISO 2023

---------------------- Page: 3 ----------------------
SIST ISO 3402:2023
ISO 3402:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 3402:2023
ISO 3402:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Atmosphere specifications .2
4.1 Conditioning atmosphere. 2
4.2 Test atmosphere . 2
5 Conditioning procedure . 3
5.1 Duration of conditioning . . 3
5.2 Checking of equilibrium . 3
iii
© ISO 2023 – All rights reserved

---------------------- Page: 5 ----------------------
SIST ISO 3402:2023
ISO 3402:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products.
This fifth edition cancels and replaces the fourth edition (ISO 3402:1999), which has been technically
revised.
The main changes are as follows:
— editorial changes have been applied to the Scope;
— the mandatory Normative references clause (Clause 2) has been added;
— the Terms and definitions have been harmonized with ISO 4387, and these terms have been
consistently used throughout the document;
— the main header Atmosphere specifications (see Clause 4) was created for Conditioning atmosphere
and Test atmosphere (renumbered as 4.1 and 4.2, respectively); the text in these
...

INTERNATIONAL ISO
STANDARD 3402
Fifth edition
2023-01
Tobacco and tobacco products —
Atmosphere for conditioning and
testing
Tabac et produits du tabac — Atmosphère de conditionnement et
d'essai
Reference number
ISO 3402:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 3402:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3402:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Atmosphere specifications .2
4.1 Conditioning atmosphere. 2
4.2 Test atmosphere . 2
5 Conditioning procedure . 3
5.1 Duration of conditioning . . 3
5.2 Checking of equilibrium . 3
iii
© ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 3402:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products.
This fifth edition cancels and replaces the fourth edition (ISO 3402:1999), which has been technically
revised.
The main changes are as follows:
— editorial changes have been applied to the Scope;
— the mandatory Normative references clause (Clause 2) has been added;
— the Terms and definitions have been harmonized with ISO 4387, and these terms have been
consistently used throughout the document;
— the main header Atmosphere specifications (see Clause 4) was created for Conditioning atmosphere
and Test atmosphere (renumbered as 4.1 and 4.2, respectively); the text in these subclauses was
editorially revised for clarity, consistency, and references to withdrawn standards have been
removed;
— duration of conditioning has been revised for clarity; text describing long term storage has been
removed since this document is not for storage of tobacco products;
— references in the Bibliography have been removed; they did not support this docum
...

NORME ISO
INTERNATIONALE 3402
Cinquième édition
2023-01
Tabac et produits du tabac —
Atmosphère de conditionnement et
d'essai
Tobacco and tobacco products — Atmosphere for conditioning and
testing
Numéro de référence
ISO 3402:2023(F)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 3402:2023(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii
  © ISO 2023 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 3402:2023(F)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives .1
3 Termes et définitions . 1
4 Spécifications de l’atmosphère .2
4.1 Atmosphère de conditionnement . 2
4.2 Atmosphère d’essai . 2
5 Mode opératoire de conditionnement. 3
5.1 Durée du conditionnement . 3
5.2 Contrôle de l’équilibre . 3
iii
© ISO 2023 – Tous droits réservés

---------------------- Page: 3 ----------------------
ISO 3402:2023(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 126, Tabac et produits du tabac.
Cette cinquième édition annule et remplace la quatrième édition (ISO 3402:1999) qui a fait l’objet d’une
révision technique.
Les principales modifications sont les suivantes :
— des modifications rédactionnelles ont été apportées au Domaine d’application ;
— l’article obligatoire « Références normatives » (Article 2) a été ajouté ;
— les termes et définitions ont été harmonisés avec l’ISO 4387 et ces termes ont été utilisés de manière
cohérente dans l’ensemble de la norme ;
— l’intitulé principal « Spécifications de l'atmosphère » (voir l'Article 4) a été créé pour l'atmosphère
de conditionnement et l'atmosphère d’essai (respectivement renumérotées 4.1 et 4.2,) Le texte de
ces paragraphes a été révisé sur le plan rédactionnel pour des raisons de clarté et de cohérence et
les références à des normes annulées ont été supprimées ;
— la durée du conditionnement a été révisée par souci de clarté ; le texte décrivant le stockage à long
terme a été retiré étant donné que le présent document n’est pas destiné au stockage des produits
du tabac ;
— des références ont été supprimées de la Bibliographie ; elles ne concernaient pas le présent document
ou se rapportaient à des normes qui ont été supprimées.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’ad
...

ISO 3402:20212022(E)
ISO TC 126/WG 23
Date: 2022-11-0817
Tobacco and tobacco products — Atmosphere for conditioning and testing
Tabac et produits du tabac — Atmosphère de conditionnement et dʼessai

---------------------- Page: 1 ----------------------
ISO 3402:2022(E)
© ISO 20212022
All rights reserved. Unless otherwise specified, or required in the context of its implementation,
no part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet,
without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3402:2022(E)
Contents
Foreword . 4
Introduction . 6
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Atmosphere specifications . 2
4.1 Conditioning atmosphere . 2
4.2 Test atmosphere . 2
5 Conditioning procedure . 3
5.1 Duration of conditioning . 3
5.2 Checking of equilibrium . 3

Foreword . iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Atmosphere specifications . 2
4.1 Conditioning atmosphere . 2
4.2 Test atmosphere . 2
5 Conditioning procedure . 3
5.1 Duration of conditioning . 3
5.2 Checking of equilibrium . 3



© ISO 2022 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 3402:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patentswww.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products.
This fifth edition cancels and replaces the fourth edition (ISO 3402:1999), which has been technically
revised.
The main changes are as follows:
— editorial changes have been applied to the Scope;
— the mandatory Normative references clause (Clause 2) has been added;
— the Terms and definitions have been
...

INTERNATIONAL ISO
STANDARD 3402
Fifth edition
Tobacco and tobacco products —
Atmosphere for conditioning and
testing
Tabac et produits du tabac — Atmosphère de conditionnement et
d'essai
PROOF/ÉPREUVE
Reference number
ISO 3402:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 3402:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3402:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Atmosphere specifications .2
4.1 Conditioning atmosphere. 2
4.2 Test atmosphere . 2
5 Conditioning procedure . 3
5.1 Duration of conditioning . . 3
5.2 Checking of equilibrium . 3
iii
© ISO 2022 – All rights reserved PROOF/ÉPREUVE

---------------------- Page: 3 ----------------------
ISO 3402:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products.
This fifth edition cancels and replaces the fourth edition (ISO 3402:1999), which has been technically
revised.
The main changes are as follows:
— editorial changes have been applied to the Scope;
— the mandatory Normative references clause (Clause 2) has been added;
— the Terms and definitions have been harmonized with ISO 4387, and these terms have been
consistently used throughout the document;
— the main header Atmosphere specifications (see Clause 4) was created for Conditioning atmosphere
and Test atmosphere (renumbered as 4.1 and 4.2, respectively); the text in these subclauses was
editorially revised for clarity, consistency, and references to withdrawn standards have been
removed;
— duration of conditioning has been revised for clarity; text describing long term storage has been
removed since this document is not for storage of tobacco products;
— references in the Bibliography have been removed; they did not suppo
...