SIST EN 60684-3-320:2004

Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated

Gives the requirements for sleeving constructed from polyethylene terephthalate yarn, lightly impregnated with resin to provide mechanical stability. This sleeving has been found suitable for use at temperatures up to 130 °C. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierschläuche -- Teil 3: Anforderungen für einzelne Schlauchtypen -- Blatt 320: PET-Textilschläuche, gering imprägniert

Gaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines -- Feuille 320: Gaines en téréphthalate de polyéthylène tissées, légèrement imprégnées

Donne les exigences relatives aux gaines fabriquées à partir de fils de téréphtalate de polyéthylène, légèrement imprégnées de résine pour leur donner une stabilité mécanique. La gaine peut être utilisée jusqu'à des températures de 130 °C. Les matériaux conformes à cette spécification satisfont à des niveaux établis de performance. Cependant il convient que le choix d'un matériau par un utilisateur pour une application spécifique soit fondé sur les exigences réelles nécessaires pour une performance adéquate de cette application, et non fondé sur cette seule spécification.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 320. list: Polietilen-tereftalat tekstilne cevi, rahlo impregnirane (IEC 60684-3-320:2002)

General Information

• Status: Published
• Publication Date: 31-Aug-2004
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IZO - Insulating materials
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Ref Project: EN 60684-3-320:2002 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated

Relations

• Replaces: SIST HD 523.3.320 S1:1998 - Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheet 320: Polyethylene terephthalate textile, lightly impregnated
• Effective Date: 29-Jan-2023
• Replaces: SIST HD 523.3.320 S1:1998 - Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheet 320: Polyethylene terephthalate textile, lightly impregnated
• Effective Date: 06-May-2014

Standards Content (Sample)

SLOVENSKI SIST EN 60684-3-320:2004

STANDARD
september 2004
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 320. list:
Polietilen-tereftalat tekstilne cevi, rahlo impregnirane (IEC 60684-3-320:2002)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving -
Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated (IEC
60684-3-320:2002)
ICS 29.035.20 Referenčna številka
SIST EN 60684-3-320:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60684-3-320
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2002
ICS 29.035.20 Supersedes HD 523.3.320 S1:1989
English version
Flexible insulating sleeving
Part 3: Specifications for individual types of sleeving
Sheet 320: Polyethylene terephthalate textile sleeving,
lightly impregnated
(IEC 60684-3-320:2002)
Gaines isolantes souples Isolierschläuche
Partie 3: Spécifications pour Teil 3: Anforderungen für einzelne
types particuliers de gaines Schlauchtypen
Feuille 320: Gaines en téréphthalate Blatt 320: PET-Textilschläuche,
de polyéthylène tissées, gering imprägniert
légèrement imprégnées (IEC 60684-3-320:2002)
(CEI 60684-3-320:2002)
This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-320:2002 E

---------------------- Page: 2 ----------------------

EN 60684-3-320:2002 - 2 -
Foreword
The text of document 15C/1356/FDIS, future edition 2 of IEC 60684-3-320, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60684-3-320 on 2002-09-01.
This European Standard supersedes HD 523.3.320 S1:1989.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-09-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-320:2002 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60684-3-320:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068-2-10 1988 Environmental testing HD 323.2.10 S3 1988
Part 2: Tests - Test J and guidance:
Mould growth
IEC 60684-1 1980 Specification for flexible insulating EN 60684-1 1995
sleeving
Part 1: Definitions and general
requirements
IEC 60684-2 1997 Flexible insulating sleeving EN 60684-2 1997
Part 2: Methods of test
IEC 60757 1983 Code for designation of colours HD 457 S1 1985

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60684-3-320
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2002-06
Gaines isolantes souples –
Partie 3:
Spécifications pour types particuliers de gaines –
Feuille 320: Gaines en téréphtalate de polyéthylène
tissées, légèrement imprégnées
Flexible insulating sleeving –
Part 3:
Specifications for individual types of sleeving –
Sheet 320: Polyethylene terephthalate textile
sleeving, lightly impregnated
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
F
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60684-3-320  IEC:2002 – 3 –
FLEXIBLE INSULATING SLEEVING –
Part 3: Specifications for individual types of sleeving –
Sheet 320: Polyethylene terephthalate textile sleeving,
lightly impregnated
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance
...