SIST EN ISO 17653:2012
(Main)Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
This International Standard specifies specimen dimensions, testing equipment and the procedure for torsion testing of resistance spot welds with single sheet thicknesses ranging from 0,5 mm to 6,0 mm in steels. It can be used for non-ferrous materials in certain circumstances. The aim of this International Standard is to determine the weld diameter and the failure type of fractured specimens, and to evaluate the influence of different steel types, welding parameters and other factors on the deformation characteristics of a resistance spot weld.
Widerstandsschweißen - Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen - Torsionsversuch an Widerstandspunktschweißungen (ISO 17653:2012)
Diese Internationale Norm legt Probenmaße, Prüfeinrichtung und Prüfverfahren für Torsionsversuche an Punktschweißverbindungen mit Einzelblechdicken im Bereich von 0,5 mm bis 6,0 mm an Stählen fest. Sie kann unter bestimmten Umständen auch für Nichteisenwerkstoffe angewendet werden.
Das Ziel der Prüfung besteht in der Bestimmung des Schweißpunktdurchmessers und der Bruchart an gebrochenen Proben und in der Bewertung des Einflusses der verschiedenen Stahlwerkstoffe, der Schweißparameter und anderer Faktoren auf die Verformungsfähigkeit einer Punktschweißverbindung mit Werten des maximalen Torsionsmoments und des zugehörigen Torsionswinkels.
Soudage par résistance - Essais destructifs des soudures sur matériaux métalliques - Essai de torsion de soudure par résistance par points (ISO 17653:2012)
1 Domaine d'application
La présente Norme internationale spécifie les dimensions des éprouvettes, le matériel d'essai et le mode
opératoire pour les essais de torsion des soudures par résistance par points d'une même tôle d'acier d'épaisseurs
comprises entre 0,5 mm et 6,0 mm. Dans certains cas, elle peut être utilisée pour les métaux non-ferreux.
L'objet de la présente Norme internationale est de déterminer le diamètre de la soudure et le type de rupture des
éprouvettes rompues, et d'évaluer l'effet des différents types d'acier, des paramètres de soudage et d'autres
facteurs sur les caractéristiques de déformation d'une soudure par résistance par points.
Uporovno varjenje - Porušitveni preskusi na zvarih na kovinskih materialih - Torzijski preskus uporovnih točkovnih zvarov (ISO 17653:2012)
Ta mednarodni standard določa mere vzorca, opremo za preskušanje in postopke za torzijsko preskušanje uporovnih točkovnih zvarov z debelino ene plasti jekla od 0,5 mm do 6,0 mm. V določenih okoliščinah se lahko uporablja za neželezne materiale. Cilj tega mednarodnega standarda je določiti premer zvara in vrsto napake poškodovanih vzorcev ter ovrednotiti vpliv različnih vrst jekla, premerov zvarov in drugih dejavnikov na deformacijske značilnosti uporovnih točkovnih zvarov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17653:2012
01-september-2012
1DGRPHãþD
SIST EN ISO 17653:2003
8SRURYQRYDUMHQMH3RUXãLWYHQLSUHVNXVLQD]YDULKQDNRYLQVNLKPDWHULDOLK
7RU]LMVNLSUHVNXVXSRURYQLKWRþNRYQLK]YDURY ,62
Resistance welding - Destructive tests on welds in metallic materials - Torsion test of
resistance spot welds (ISO 17653:2012)
Widerstandsschweißen - Zerstörende Prüfung von Schweißverbindungen an
metallischen Werkstoffen - Torsionsversuch an Widerstandspunktschweißungen (ISO
17653:2012)
Soudage par résistance - Essais destructifs des soudures sur matériaux métalliques -
Essai de torsion de soudure par résistance par points (ISO 17653:2012)
Ta slovenski standard je istoveten z: EN ISO 17653:2012
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 17653:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17653:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 17653:2012
EUROPEAN STANDARD
EN ISO 17653
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2012
ICS 25.160.40 Supersedes EN ISO 17653:2003
English Version
Resistance welding - Destructive tests on welds in metallic
materials - Torsion test of resistance spot welds (ISO
17653:2012)
Soudage par résistance - Essais destructifs des soudures Widerstandsschweißen - Zerstörende Prüfung von
sur matériaux métalliques - Essai de torsion de soudure par Schweißverbindungen an metallischen Werkstoffen -
résistance par points (ISO 17653:2012) Torsionsversuch an
Widerstandspunktschweißverbindungen (ISO 17653:2012)
This European Standard was approved by CEN on 20 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17653:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17653:2012
EN ISO 17653:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17653:2012
EN ISO 17653:2012 (E)
Foreword
This document (EN ISO 17653:2012) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn
at the latest by November 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 17653:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17653:2012 has been approved by CEN as a EN ISO 17653:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17653:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 17653:2012
INTERNATIONAL ISO
STANDARD 17653
Second edition
2012-05-01
Resistance welding — Destructive tests
on welds in metallic materials — Torsion
test of resistance spot welds
Soudage par résistance — Essais destructifs des soudures sur matériaux
métalliques — Essai de torsion de soudure par résistance par points
Reference number
ISO 17653:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 17653:2012
ISO 17653:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17653:2012
ISO 17653:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Specimens . 1
5 Testing equipment and testing procedure . 2
5.1 Non-instrumented torsion test (workshop test) . 2
5.2 Instrumented torsion test . 3
6 Evaluation of test results whenever applying the instrumented torsion tests . 4
7 Test report . 5
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17653:2012
ISO 17653:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subje
...
SLOVENSKI STANDARD
oSIST prEN ISO 17653:2011
01-maj-2011
8SRURYQRYDUMHQMH3RUXãLWYHQLSUHVNXVLQD]YDULKQDNRYLQVNLKPDWHULDOLK
7RU]LMVNLSUHVNXVXSRURYQLKWRþNRYQLK]YDURY ,62',6
Resistance welding - Destructive tests on welds in metallic materials - Torsion test of
resistance spot welds (ISO/DIS 17653:2011)
Widerstandsschweißen - Zerstörende Prüfung von Schweißverbindungen an
metallischen Werkstoffen - Torsionsversuch an Widerstandspunktschweißungen
(ISO/DIS 17653:2011)
Soudage par résistance - Essais destructifs des soudures sur matériaux métalliques -
Essai de torsion de soudure par résistance par points (ISO/DIS 17653:2011)
Ta slovenski standard je istoveten z: prEN ISO 17653
ICS:
25.160.40 Varjeni spoji in vari Welded joints
oSIST prEN ISO 17653:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 17653:2011
---------------------- Page: 2 ----------------------
oSIST prEN ISO 17653:2011
EUROPEAN STANDARD
DRAFT
prEN ISO 17653
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2011
ICS 25.160.40 Will supersede EN ISO 17653:2003
English Version
Resistance welding - Destructive tests on welds in metallic
materials - Torsion test of resistance spot welds (ISO/DIS
17653:2011)
Soudage par résistance - Essais destructifs des soudures Widerstandsschweißen - Zerstörende Prüfung von
sur matériaux métalliques - Essai de torsion de soudure par Schweißverbindungen an metallischen Werkstoffen -
résistance par points (ISO/DIS 17653:2011) Torsionsversuch an Widerstandspunktschweißungen
(ISO/DIS 17653:2011)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 17653:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN ISO 17653:2011
prEN ISO 17653:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST prEN ISO 17653:2011
prEN ISO 17653:2011 (E)
Foreword
This document (prEN ISO 17653:2011) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 17653:2003.
Endorsement notice
The text of ISO/DIS 17653:2011 has been approved by CEN as a prEN ISO 17653:2011 without any
modification.
3
---------------------- Page: 5 ----------------------
oSIST prEN ISO 17653:2011
---------------------- Page: 6 ----------------------
oSIST prEN ISO 17653:2011
DRAFT INTERNATIONAL STANDARD ISO/DIS 17653
ISO/TC 44/SC 6 Secretariat: DIN
Voting begins on Voting terminates on
2011-01-06 2011-06-06
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Resistance welding — Destructive tests on welds in metallic
materials — Torsion test of resistance spot welds
Soudage par résistance — Essais destructifs des soudures sur matériaux métalliques — Essai de torsion de
soudure par résistance par points
[Revision of first edition (ISO 17653:2003)]
ICS 25.160.40
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME
STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
© International Organization for Standardization, 2011
---------------------- Page: 7 ----------------------
oSIST prEN ISO 17653:2011
ISO/DIS 17653
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 17653:2011
ISO/DIS 17653
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.