iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 16571:2024/oprA1:2025

(Amendment)

Systems for evacuation of plume generated by medical devices - Amendment 1 (ISO 16571:2024/DAM 1:2025)

Systems for evacuation of plume generated by medical devices - Amendment 1 (ISO 16571:2024/DAM 1:2025)

Rauchgasabsaugsysteme für Medizinprodukte - Änderung 1 (ISO 16571:2024/DAM 1:2025)

Systèmes d'évacuation des fumées chirurgicales générées par l'utilisation de dispositifs médicaux - Amendement 1 (ISO 16571:2024/DAM 1:2025)

Sistemi za odsesavanje hlapov, ki nastanejo zaradi uporabe medicinskih pripomočkov - Dopolnilo A1 (ISO 16571:2024/DAM 1:2025)

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2025
ICS
11.040.01 - Medical equipment in general
11.040.10 - Anaesthetic, respiratory and reanimation equipment
Technical Committee
VAZ - Healthcare
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Jun-2025
Due Date
24-Oct-2025
Ref Project
EN ISO 16571:2024/prA1 - Systems for evacuation of plume generated by medical devices - Amendment 1 (ISO 16571:2024/DAM 1:2025)

Relations

Amends
SIST EN ISO 16571:2024 - Systems for evacuation of plume generated by medical devices (ISO 16571:2024)
Effective Date
17-Mar-2025

Buy Standard

EN ISO 16571:2024/oprA1:2025EN ISO 16571:2024/oprA1:2025
PreviousNext
Draft
EN ISO 16571:2024/oprA1:2025
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2025
Sistemi za odsesavanje hlapov, ki nastanejo zaradi uporabe medicinskih
pripomočkov - Dopolnilo A1 (ISO 16571:2024/DAM 1:2025)
Systems for evacuation of plume generated by medical devices - Amendment 1 (ISO
16571:2024/DAM 1:2025)
Rauchgasabsaugsysteme für Medizinprodukte - Änderung 1 (ISO 16571:2024/DAM
1:2025)
Systèmes d'évacuation des fumées chirurgicales générées par l'utilisation de dispositifs
médicaux - Amendement 1 (ISO 16571:2024/DAM 1:2025)
Ta slovenski standard je istoveten z: EN ISO 16571:2024/prA1
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 16571:2024/
DAM 1
ISO/TC 121/SC 6
Systems for evacuation of plume
Secretariat: ANSI
generated by medical devices
Voting begins on:
AMENDMENT 1
2025-05-26
Systèmes d'évacuation des fumées chirurgicales générées par Voting terminates on:
l'utilisation de dispositifs médicaux 2025-08-18
AMENDEMENT 1
ICS: 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 16571:2024/DAM 1:2025(en)
DRAFT
ISO 16571:2024/DAM 1:2025(en)
Amendment
ISO 16571:2024/
DAM 1
ISO/TC 121/SC 6
Systems for evacuation of plume
Secretariat: ANSI
generated by medical devices
Voting begins on:
AMENDMENT 1
Systèmes d'évacuation des fumées chirurgicales générées par Voting terminates on:
l'utilisation de dispositifs médicaux
AMENDEMENT 1
ICS: 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be rep
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 16571:2024(Main)
Systems for evacuation of plume generated by medical devices (ISO 16571:2024)
EN ISO 16571:2024

This document specifies requirements and guidelines for systems and equipment used to evacuate plume generated by medical devices.
 This document applies to all types of plume evacuation systems (PESs), including
a)       portable;
b)       mobile;
c)        stationary, including dedicated central pipelines;
d)       PESs integrated into other equipment;
e)       PESs for endoscopic procedures (e.g., minimally invasive, laparoscopic)
This document applies to all healthcare facilities where PESs are used, including, but not limited to
a)       surgical facilities;
b)       medical offices;
c)        cosmetic treatment facilities;
d)       medical teaching facilities;
e)       dental clinics;
f)         veterinary facilities.
This document provides guidance on the following aspects of PESs:
a)       importance;
b)       purchasing;
c)        design;
d)       manufacture;
e)       documentation;
f)         function;
g)       performance;
h)       installation;
i)         commissioning;
j)         testing;
k)       training;
l)         use;
m)     risk assessment;
n)       servicing;
o)       maintenance.
This document does not apply to the following:
a)       anaesthetic gas scavenging systems (AGSSs) which are covered in ISO 7396-2;
b)       medical vacuum systems which are covered in ISO 7396-1;
c)        heating, ventilation, and air-conditioning (HVAC) systems;
d)       aspects of laser safety other than airborne contamination; and
e)       aspects of electrosurgery, electrocautery, and mechanical surgical tools other than airborne contamination produced by such equipment resulting from interaction with tissue or materials.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 11197:2024(Main)
Medical supply units (ISO/DIS 11197:2024)
prEN ISO 11197

IEC 60601-1:2005+A1:2012, 1.1 is replaced by:
This document applies to the basic safety and essential performance of medical supply units, hereafter also referred to as ME equipment.
This document applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patient care services.
NOTE 1 A party that assembles on site various components intended for patient care services into an enclosure is considered the manufacturer of the medical supply unit.
Hazards inherent in the intended function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this standard, except in of IEC 60601-1:2005+A1:2012, 7.2.13 and 8.4.1 (see 201.1.4).
NOTE 2 Refer to IEC 60601-1:2005+A1:2012, 4.2.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16571:2024(Main)
Systems for evacuation of plume generated by medical devices (ISO 16571:2024)
EN ISO 16571:2024

This document specifies requirements and guidelines for systems and equipment used to evacuate plume generated by medical devices.
 This document applies to all types of plume evacuation systems (PESs), including
a)       portable;
b)       mobile;
c)        stationary, including dedicated central pipelines;
d)       PESs integrated into other equipment;
e)       PESs for endoscopic procedures (e.g., minimally invasive, laparoscopic)
This document applies to all healthcare facilities where PESs are used, including, but not limited to
a)       surgical facilities;
b)       medical offices;
c)        cosmetic treatment facilities;
d)       medical teaching facilities;
e)       dental clinics;
f)         veterinary facilities.
This document provides guidance on the following aspects of PESs:
a)       importance;
b)       purchasing;
c)        design;
d)       manufacture;
e)       documentation;
f)         function;
g)       performance;
h)       installation;
i)         commissioning;
j)         testing;
k)       training;
l)         use;
m)     risk assessment;
n)       servicing;
o)       maintenance.
This document does not apply to the following:
a)       anaesthetic gas scavenging systems (AGSSs) which are covered in ISO 7396-2;
b)       medical vacuum systems which are covered in ISO 7396-1;
c)        heating, ventilation, and air-conditioning (HVAC) systems;
d)       aspects of laser safety other than airborne contamination; and
e)       aspects of electrosurgery, electrocautery, and mechanical surgical tools other than airborne contamination produced by such equipment resulting from interaction with tissue or materials.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 11197:2024(Main)
Medical supply units (ISO/DIS 11197:2024)
prEN ISO 11197

IEC 60601-1:2005+A1:2012, 1.1 is replaced by:
This document applies to the basic safety and essential performance of medical supply units, hereafter also referred to as ME equipment.
This document applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patient care services.
NOTE 1 A party that assembles on site various components intended for patient care services into an enclosure is considered the manufacturer of the medical supply unit.
Hazards inherent in the intended function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this standard, except in of IEC 60601-1:2005+A1:2012, 7.2.13 and 8.4.1 (see 201.1.4).
NOTE 2 Refer to IEC 60601-1:2005+A1:2012, 4.2.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 729-1 V3.1.1:2025(Main)
Short Range Devices (SRD) using Ultra Wide Band technology (UWB) - Harmonised standard for access to radio spectrum - Part 1: Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz for strictly vertical downward installation
ETSI EN 302 729-1 V3.1.1 (2025-05)

REN/ERM-TGUWB-152

  • Standard
    51 pages
    English language
    sale 15% off
  • Standard
    51 pages
    English language
    sale 15% off
  • Standard
    51 pages
    English language
    sale 15% off
  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 37003:2025(Main)
Fraud control management systems — Guidance for organizations managing the risk of fraud
ISO 37003:2025

This document provides guidance for organizations for the development, implementation and maintenance of an effective fraud control management system (FCMS). This includes fraud prevention, early detection of fraud and effective response to fraud events that have occurred or can occur in the future.
The document provides guidance for managing the risk of fraud, including:
a) internal fraud against the organization;
b) external fraud against the organization;
c) internal fraud in collaboration with business associates or other third parties;
d) external fraud in collaboration with the organization’s personnel;
e) fraud by the organization or by persons purporting to act on behalf of and in the interests of the organization.
This document is applicable to all organizations, regardless of type, size, nature of activity and whether in the public or private, profit or not-for-profit sectors. It is not intended to assist consumers in preventing, detecting or responding to what is generally termed "consumer fraud".

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    45 pages
    English language
    sale 15% off
SIST
SIST EN 15347-2:2025(Main)
Plastics - Sorted plastics wastes - Part 2: Quality grades of sorted Polyethylene (PE) wastes and specific test methods
EN 15347-2:2025

This document specifies the quality grades for sorted Polyethylene (PE) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polyethylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 303 215 V1.5.1:2025(Main)
Environmental Engineering (EE) - Measurement methods and limits for power consumption in broadband telecommunication networks equipment
ETSI EN 303 215 V1.5.1 (2025-06)

REN/EE-EEPS71

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 303 800-2 V1.1.1:2025(Main)
Environmental Engineering (EE) - Assessment of material efficiency of ICT network infrastructure goods (circular economy) - Part 2: Server and data storage product secure data deletion functionality
ETSI EN 303 800-2 V1.1.1 (2025-06)

DEN/EE-EEPS47-2

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15347-3:2025(Main)
Plastics - Sorted plastics wastes - Part 3: Quality grades of sorted Polypropylene (PP) wastes and specific test methods
EN 15347-3:2025

This document specifies the quality grades for sorted polypropylene (PP) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polypropylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day