LPG equipment and accessories - LPG tanks and drums - Disposal

This European Standard specifies methods for the safe gas freeing and disposal of LPG tanks and drums above 150-litre water capacity. This European Standard is applicable to the following: - tanks manufactured in accordance with EN 12542; - drums manufactured in accordance with EN 14893, and - LPG tanks and drums manufactured in accordance with any other pressure vessel code.

Flüssiggas-Geräte und Ausrüstungsteile - Behälter und Fässer für Flüssiggas (LPG) - Entsorgung

Diese Europäische Norm legt Verfahren für die sichere Entgasung und Entsorgung von LPG-Druckbehältern und LPG-Fässern mit einem Fassungsraum von über 150 Liter fest.
Diese Europäische Norm gilt für:
-   in Übereinstimmung mit EN 12542 hergestellte Druckbehälter;
-   in Übereinstimmung mit EN 14893 hergestellte Fässer; und
-   in Übereinstimmung mit jeglichem anderen Druckbehälterregelwerk hergestellte LPG-Druckbehälter und LPG-Fässer.

Equipements et accessoires pour GPL - Réservoirs pour GPL - Élimination

La présente Norme européenne spécifie des méthodes pour le dégazage et l’élimination en toute sécurité des réservoirs et des fûts de GPL d'une capacité en eau supérieure à 150 l.
Cette Norme européenne s’applique :
-   aux réservoirs fabriqués conformément à l’EN 12542 ;
-   aux fûts fabriqués conformément à l’EN 14893 ;
-   aux réservoirs et fûts de GPL fabriqués conformément à d’autres codes de réservoirs à pression.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Posode in sodi za utekočinjeni naftni plin (UNP) - Trajno izločanje iz uporabe

Ta evropski standard določa metode za varen izpust plinov in trajno izločanje iz uporabe posod in sodov za utekočinjeni naftni plin z vodno kapaciteto nad 150 litrov. Ta evropski standard velja za naslednje: - posode, izdelane v skladu z EN 12542; - sode, izdelane v skladu z EN 14893, in – posode in sode za utekočinjeni naftni plin, izdelane v skladu s katerim koli kodeksom za tlačne posode.

General Information

Status
Published
Public Enquiry End Date
24-Jul-2009
Publication Date
13-Oct-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Oct-2011
Due Date
11-Dec-2011
Completion Date
14-Oct-2011

Relations

Effective Date
01-Nov-2011
Effective Date
08-Jun-2022

Buy Standard

Standard
EN 13109:2011
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-Geräte und Ausrüstungsteile - Behälter und Fässer für Flüssiggas (LPG) - EntsorgungEquipements et accessoires pour GPL - Réservoirs pour GPL - ÉliminationLPG equipment and accessories - LPG tanks and drums - Disposal23.020.10UH]HUYRDUMLStationary containers and tanksICS:Ta slovenski standard je istoveten z:EN 13109:2010SIST EN 13109:2011en,fr,de01-november-2011SIST EN 13109:2011SLOVENSKI
STANDARDSIST EN 13109:20031DGRPHãþD



SIST EN 13109:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13109
December 2010 ICS 23.020.30 Supersedes EN 13109:2002English Version
LPG equipment and accessories - LPG tanks and drums - Disposal
Équipements et accessoires pour GPL - Réservoirs pour GPL - Élimination
Flüssiggas-Geräte und Ausrüstungsteile - Behälter und Fässer für Flüssiggas (LPG) - Entsorgung This European Standard was approved by CEN on 20 November 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13109:2010: ESIST EN 13109:2011



EN 13109:2010 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Gas freeing of tanks and drums .55 Scrapping of tanks and drums .66 Disposal of tanks and drums for uses other than for LPG storage .7Annex A (informative)
Methods of gas freeing .8A.1 Preparation for gas freeing .8A.2 Methods of gas freeing .8A.2.1 By water .8A.2.2 By inert gas .8A.2.3 By steam .9A.2.4 By vacuum pump or compressor.9Annex B (informative)
High level venting of LPG tanks and drums . 11Annex C (informative)
Environmental checklist . 12Bibliography . 13 SIST EN 13109:2011



EN 13109:2010 (E) 3 Foreword This document (EN 13109:2010) has been prepared by Technical Committee CEN/TC 286 “Liquefied petroleum gas equipment and accessories”, the secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13109:2002. The main technical change in this revision is the inclusion of an environmental checklist Annex C. Users of this standard, prepared in the field of application of Article 118A of the EC Treaty, should be aware that standards have no formal legal relationship with Directives that may have been made under Article 118A of the Treaty. In addition, national legislation in the Member states may contain more stringent requirements than the minimum requirements of a Directive based on Article 118A. Information on the relationship between the national legislation implementing Directives based on Article 118A and this EN may be given in a national foreword of the national standard implementing this standard EN. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13109:2011



EN 13109:2010 (E) 4 Introduction This European Standard specifies methods for the safe disposal of LPG tanks and drums. This European Standard calls for the use of substances and procedures that may be injurious to health and/or the environment if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health, safety and environmental protection at any stage. Protection of the environment is a key political issue in Europe and elsewhere. Protection of the environment is taken in a very broad sense. The standard takes into consideration the total lifecycle aspects of the activities involved in complying with the standard. These activities include all phases such as scrapping, recycling of materials, etc. It has been assumed in the drafting of this European Standard that execution of its provisions is entrusted to appropriately qualified and experienced people. SIST EN 13109:2011



EN 13109:2010 (E) 5 1 Scope This European Standard specifies methods for the safe gas freeing and disposal of LPG tanks and drums above 150-litre water capacity. This European Standard is applicable to the following:  tanks manufactured in accordance with EN 12542;  drums manufactured in accordance with EN 14893, and  LPG tanks and drums manufactured in accordance with any other pressure vessel code. 2 Normative references Not applicable. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 liquefied petroleum gas LPG mixture of predominantly butane or propane with traces of other hydrocarbon gases classified in accordance with UN number 1965, hydrocarbon gases mixture, liquefied, NOS or UN number 1075, petroleum gases, liquefied NOTE In some countries, UN numbers 1011 and 1978 may also be designated LPG. 3.2 gas free with an LPG concentration in air less than 20 % of the lower explosive limit 3.3 disposal gas freeing and discarding LPG tanks and drums either in the form of scrap metal or for use in non-pressure applications 3.4 competent person person who, by qualification, training, experience and resources, is able to make objective judgements related to the safe disposal of LPG tanks and drums 3.5 hydrate hydrocarbon and water compound which forms under reduced temperature and pressure, e.g. venting, and in appearance resemble snow or ice, and can plug equipment 4 Gas freeing of tanks and drums 4.1 Residual liquid LPG shall be safely removed from a tank or drum by a competent person. SIST EN 13109:2011



EN 13109:2010 (E) 6 4.2 LPG shall be either:  returned to an in-service LPG tank, or  flared through a purpose designed flare stack fitted with a flame arrestor, or  vented through a purpose designed high level vent, in a controlled manner, that ensures that the vented gas is diluted to less than 20 % of the lower explosive limit before it reaches ground level or any potential source of ignition (see Annex B), or  a combination of any of these options. For safety and environmental protection reasons the first option is preferable. 4.3 Tanks and drums shall be made gas free by a method chosen and controlled by a competent person. NOTE 1 Annex A gives examples of gas freeing methods. NOTE 2 The method of gas freeing should be selected so that it is technically effective and the environmental impact reduced to a minimum. After selecting the appropriate method, all suitable measures should be implemented in order to minimise the loss of energy, the emissions to air, raw
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.