SIST EN 13481-4:2004
(Main)Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers
This European Standard is applicable to fastening systems for use on steel sleepers in ballasted track as follows:
3 main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of 260 kN;
3 light rail systems having a radius of curvature greater than 80 m and subject to a maximum design axle load of 130 kN.
The requirements apply to:
3 direct fastening systems and systems which incorporate a baseplate;
3 fastening systems for the rail sections in prEN 13674-1 and prEN 13674-4.
This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints.
This standard is for type approval of a complete fastening assembly only.
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestingungssysteme - Teil 4: Befestigungssysteme für Stahlschwellen
Diese Europäische Norm gilt für folgende Schienenbefestigungssysteme auf Stahlschwellen im Schotteroberbau:
Vollbahnstrecken mit einem Gleisbogenhalbmesser von > 150 m und einer maximalen Auslegungsachslast von 260 kN
Stadtbahnstrecken mit einem Gleisbogenhalbmesser von > 80 m und einer maximalen Auslegungsachslast von 130 kN.
Diese Anforderungen gelten für:
direkte Schienenbefestigungssysteme und Systeme, die Rippenplatten beinhalten;
Befestigungssysteme für Schienenquerschnitte nach prEN 13674-1 und prEN 13674-4.
Diese Norm gilt nicht für Befestigungssysteme für andere Schienenquerschnitte, starre Befestigungssysteme oder spezielle Befestigungssysteme für Schienenstöße.
Diese Norm gilt ausschließlich für die Typzulassungprüfung für ein komplettes Schienenbefestigungssystem.
Applications ferroviaires - Voie - Prescriptions de performance pour les systemes de fixation - Partie 4: Systemes de fixation des traverses en acier
La présente norme européenne s'applique aux systemes de fixation destinés a etre utilisés sur des traverses en béton comme suite:
3 Lignes principales ayant un rayon de courbure supérieure a 150 m et sujet a l'application d'une charge a l'essieu théorique maximale de 260 kN;
3 Rails pour véhicules légers ayant un rayon de courbure supérieure a 80 m et sujet a l'application d'une charge a l'essieu théorique maximale de 130 kN.
Les prescriptions s'appliquent:
3 aux systemes de fixation directs et aux systemes avec selle;
3 aux systemes de fixation pour les profils de rails indiqués dans le prEN 13674-1 et le prEN 13674-4.
Elles ne sont pas applicables aux systemes de fixation particuliers relatifs aux autres profils de rail, aux systemes de fixation rigide, ou aux systemes de fixation spéciaux utilisés aux joints éclissés.
La présente norme s'applique uniquement a la qualification d'un systeme d'attache.
Železniške naprave – Zgornji ustroj – Zahteve za izdelavo pritrdilnih sistemov – 4. del: Pritrdilni sistemi za jeklene prage
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave – Zgornji ustroj – Zahteve za izdelavo pritrdilnih sistemov – 4. del: Pritrdilni sistemi za jeklene prageBahnanwendungen - Oberbau - Leistungsanforderungen für
Schienenbefestingungssysteme - Teil 4: Befestigungssysteme für StahlschwellenApplications ferroviaires - Voie - Prescriptions de performance pour les systemes de fixation - Partie 4: Systemes de fixation des traverses en acierRailway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13481-4:2002SIST EN 13481-4:2004en01-marec-2004SIST EN 13481-4:2004SLOVENSKI
STANDARD
SIST EN 13481-4:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13481-4June 2002ICS 93.100English versionRailway applications - Track - Performance requirements forfastening systems - Part 4: Fastening systems for steel sleepersApplications ferroviaires - Voie - Prescriptions deperformance pour les systèmes de fixation - Partie 4:Systèmes de fixation des traverses en acierBahnanwendungen - Oberbau - Leistungsanforderungen fürSchienenbefestingungssysteme - Teil 4:Befestigungssysteme für StahlschwellenThis European Standard was approved by CEN on 6 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13481-4:2002 ESIST EN 13481-4:2004
EN 13481-4:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.54Symbols.55Requirements.65.1Longitudinal rail restraint.65.2Torsional resistance.65.3Effect of repeated loading.65.4Electrical resistance.85.5Effect of exposure to severe environmental conditions.85.6Dimensions.85.7Effect of fastening system tolerances on track gauge.95.8Clamping force.95.9In-service testing.96Test specimens.97Classification.98Fitness for purpose.99Marking, labelling and packaging.10Annex A (normative)
Effect of repeated loading - steel sleeper configuration.11A.1Test arrangement.11A.2Test report.12Bibliography.13SIST EN 13481-4:2004
EN 13481-4:2002 (E)3ForewordThis document EN 13481-4:2002 has been prepared by Technical Committee CEN/TC 256 “Railway Applications”,the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2002, and conflicting national standards shall be withdrawn at the latestby December 2002.This European Standard has been prepared under Mandates (M/0241) given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directives.No existing European Standard is superseded.This European Standard is one of the series EN 13481 “Railway applications ¾ Track ¾ Performancerequirements for fastening systems” which consists of the following parts.¾ Part 1: Definitions;¾ Part 2: Fastening systems for concrete sleepers;¾ Part 3: Fastening systems for
wood sleepers;¾ Part 4: Fastening systems for steel sleepers;¾ Part 5: Fastening systems for slab track;¾ Part 6: Special fastening systems for attenuation of vibration;¾ Part 7: Special fastening systems for switches and crossings and check rails.These are supported by the test methods in the series EN13146 “Railway applications – Track – Test methods forfastening systems”.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.
1) Railway EquipmentSIST EN 13481-4:2004
EN 13481-4:2002 (E)4IntroductionA requirement for longitudinal rail restraint is included to control rail creep and pull apart in the event of a brokenrail.Measurement of torsional resistance is included for use in assessing the risk of track buckling.The laboratory test for the effect of repeated loading is the means of assessing potential long-term performance ofthe fastening in track.The test for clamping force is only suitable for laboratory use.1 ScopeThis European Standard is applicable to fastening systems for use on steel sleepers in ballasted track as follows:¾ main lines having a radius of curvature greater than 150 m and subject to a maximum design axle load of260 kN;¾ light rail systems having a radius of curvature greater than 80 m and subject to a maximum design axle load of130 kN.The requirements apply to:¾ direct fastening systems and systems which incorporate a baseplate;¾ fastening systems for the rail sections in prEN 13674-1 and prEN 13674-4.This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or specialfastening systems used at bolted joints.This standard is for type approval of a complete fastening assembly only.2 Normative referencesThis European Standard incorporates by dated or undated references, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublications referred to applies (including amendments).prEN 13146-1, Railway applications ¾
Track ¾
Test methods for fastening systems ¾ Part 1: Determination oflongitudinal restraint.prEN 13146-2, Railway applications ¾ Track ¾ Test methods for fastening systems ¾ Part 2: Determination oftorsional resistance.prEN 13146-4:1998, Railway applications ¾ Track ¾ Test methods for fastening systems ¾ Part 4: Effect ofrepeated loading.prEN 13146-5, Railway applications ¾ Track ¾ Test methods for fastening systems ¾ Part 5: Determination ofelectrical resistance.SIST EN 13481-4:2004
EN 13481-4:2002 (E)5EN 13146-6, Railway applications ¾ Track ¾ Test methods for fastening sy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.