SIST EN 13274-4:2001

Respiratory protective devices - Methods of test - Part 4: Flame tests

This European Standard specifies methods for flame tests to be applied to respiratory protective devices.

Atemschutzgeräte - Prüfverfahren - Teil 4: Flammenprüfungen

Appareils de protection respiratoire - Méthodes d'essai - Partie 4: Essais a la flamme

Domaine d'application
La présente Norme européenne spécifie les méthodes pour les essais a la flamme a appliquer aux appareils de protection respiratoire.

Oprema za varovanje dihal - Metode preskušanja - 4. del: Preskusi s plamenom

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2001
• Withdrawal Date: 17-Nov-2020
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 13.340.30 - Respiratory protective devices
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Nov-2020
• Due Date: 11-Dec-2020
• Completion Date: 18-Nov-2020
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN 13274-4:2001 - Respiratory protective devices - Methods of test - Part 4: Flame tests

Relations

• Replaced By: SIST EN 13274-4:2020 - Respiratory protective devices - Methods of test - Part 4: Flame test
• Effective Date: 01-Dec-2020
• Replaced By: SIST EN 13274-4:2020 - Respiratory protective devices - Methods of test - Part 4: Flame test
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Respiratory protective devices - Methods of test - Part 4: Flame testsOprema za varovanje dihal - Metode preskušanja - 4. del: Preskusi s plamenomAppareils de protection respiratoire - Méthodes d'essai - Partie 4: Essais a la flammeAtemschutzgeräte - Prüfverfahren - Teil 4: Flammenprüfungen13.340.30Varovalne dihalne napraveRespiratory protective devices13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:SIST EN 13274-4:2001enTa slovenski standard je istoveten z:EN 13274-4:200101-december-2001SIST EN 13274-4:2001SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13274-4August 2001ICS 13.220.40; 13.340.30English versionRespiratory protective devices - Methods of test - Part 4: FlametestsAppareils de protection respiratoire - Méthodes d'essai -Partie 4: Essais à la flammeAtemschutzgeräte - Prüfverfahren - Teil 4:FlammenprüfungenThis European Standard was approved by CEN on 17 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13274-4:2001 E



EN 13274-4:2001 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.44Pre-requisites.45General test requirements.46Six burner static test: Method 1.56.1Principle.56.2Test rig.56.3Procedure.57Single burner static test: Method 2.57.1Principle.57.2Test rig.57.3Procedure.68Single burner moving specimen test: Method 3.68.1Principle.68.2Test rig.68.3Procedure.6Annex A (normative)
Test results - Uncertainty of measurement.11Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.12



EN 13274-4:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 79 "Respiratory protective devices",the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latestby February 2002.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.EN 13274-4 is one of several parts, which are as follows:Part 1: Determination of inward leakage and total inward leakagePart 2: Practical performance testsPart 3: Determination of breathing resistancePart 4: Flame testsPart 5: Climatic conditionsPart 6: Determination of carbon dioxide content of inhalation airPart 7: Determination of particle filter penetrationPart 8: Determination of dolomite dust cloggingAnnex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countriesare bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France,Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerlandand the United Kingdom.



EN 13274-4:2001 (E)4IntroductionThis European Standard is intended as a supplement to the specific device standards for respiratory protective devices.Test methods are specified for complete or parts of devices. If deviations from the test method given in this standardare necessary, these deviations will be specified in the relevant device standard.1 ScopeThis European Standard specifies methods for flame tests to be applied to respiratory protective devices.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 132, Respiratory protective devices – Definitions of terms and pictograms.ISO 6941:1987/AMD 1:1992, Textile fabrics - Burning behaviour - Measurement of flame spread properties ofvertically oriented specimens.3 Terms and definitionsFor the purposes of this European Standard, the terms and definitions given in EN 132 apply.4 Pre-requisitesIn order to implement this European Standard, at least the following parameters need to be specified in the relevantdevice standard: Components to
...