SIST EN ISO 217:2008

Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2008)

The document specifies a primary range and a supplementary range of untrimmed sizes for paper in sheets which are to be trimmed to the ISO-A series of sizes as given in EN 20216, and establishes a system of designation of untrimmed sizes. The document also specifies the method of expression of direction of manufacture of untrimmed sizes.

Papier - Rohformate - Kennzeichnung und Toleranzen für die Grund- und Ergänzungsreihen, Angabe der Maschinenlaufrichtung (ISO 217:2008)

Diese Internationale Norm legt eine Grundreihe und eine Ergänzungsreihe für Rohformate für Bogen fest, die auf die in ISO 216 festgelegten Formate der ISO-A-Reihe beschnitten werden sollen. Darüber hinaus wird ein System zur Kennzeichnung von Rohformaten eingefügt.
Weiterhin legt diese Internationale Norm ein System für die Angabe der Maschinenlaufrichtung von Roh¬formaten fest.

Papier - Formats bruts - Désignation et tolérances pour la série principale et la série auxiliaire, et désignation du sens machine (ISO 217:2008)

L'ISO 217:2008 spécifie une série principale et une série auxiliaire de formats bruts de papier en feuilles destinés à être découpés aux formats de la série A-ISO indiqués dans l'ISO 216, et établit un système de désignation des formats bruts.
L'ISO 217:2008 spécifie également la méthode permettant d'indiquer le sens machine des formats bruts.

Papir - Neobrezane pole - Označevanje in dovoljena odstopanja za osnovne in dopolnilne formate ter navedba smeri v stroju (ISO 217:2008)

General Information

• Status: Withdrawn
• Publication Date: 08-Oct-2008
• Withdrawal Date: 15-Sep-2013
• ICS: 85.060 - Paper and board
• Technical Committee: VPK - Pulp, paper, board and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Sep-2013
• Due Date: 09-Oct-2013
• Completion Date: 16-Sep-2013
• Ref Project: EN ISO 217:2008 - Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2008)

Relations

• Replaces: SIST EN 644:2000 - Paper - Untrimmed sizes - Primary range and supplementary range designation and tolerances, expression of direction of manufacture
• Effective Date: 01-Nov-2008
• Replaced By: SIST EN ISO 217:2013 - Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013)
• Effective Date: 01-Oct-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 217:2008
01-november-2008
1DGRPHãþD
SIST EN 644:2000
3DSLU1HREUH]DQHSROH2]QDþHYDQMHLQGRYROMHQDRGVWRSDQMD]DRVQRYQHLQ
GRSROQLOQHIRUPDWHWHUQDYHGEDVPHULYVWURMX,62
Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary
ranges, and indication of machine direction (ISO 217:2008)
Papier - Rohformate - Kennzeichnung und Toleranzen für die Grund- und
Ergänzungsreihen, Angabe der Maschinenlaufrichtung (ISO 217:2008)
Papier - Formats bruts - Désignation et tolérances pour la série principale et la série
auxiliaire, et désignation du sens machine (ISO 217:2008)
Ta slovenski standard je istoveten z: EN ISO 217:2008
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 217:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 217:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 217:2008
EUROPEAN STANDARD
EN ISO 217
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 85.060 Supersedes EN 644:1999
English Version
Paper - Untrimmed sizes - Designation and tolerances for
primary and supplementary ranges, and indication of machine
direction (ISO 217:2008)
Papier - Formats bruts - Désignation et tolérances pour la Papier - Rohformate - Kennzeichnung und Toleranzen für
série principale et la série auxiliaire, et désignation du sens die Grund- und Ergänzungsreihen, Angabe der
machine (ISO 217:2008) Maschinenlaufrichtung (ISO 217:2008)
This European Standard was approved by CEN on 18 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 217:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 217:2008
EN ISO 217:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 217:2008
EN ISO 217:2008 (E)
Foreword
This document (EN ISO 217:2008) has been prepared by Technical Committee ISO/TC 6 "Paper, board and
pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2009, and conflicting national standards shall be withdrawn at
the latest by January 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 644:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 217:2008 has been approved by CEN as a EN ISO 217:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 217:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 217:2008

INTERNATIONAL ISO
STANDARD 217
Third edition
2008-07-15


Paper — Untrimmed sizes — Designation
and tolerances for primary and
supplementary ranges, and indication of
machine direction
Papier — Formats bruts — Désignation et tolérances pour la série
principale et la série auxiliaire, et désignation du sens machine




Reference number
ISO 217:2008(E)
©
ISO 2008

---------------------- Page: 7 ----------------------

SIST EN ISO 217:2008
ISO 217:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 217:2008
ISO 217:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International
...