Broadband Radio Access Networks (BRAN) - 5 GHz high performance RLAN - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

a) To revise EN 301 893 v 1.5.1 in line with TCAM (26)83; b) To consider amending the section on Nominal Channel Bandwidth and Occupied Bandwidth; c) To consider editorial changes and comments received since the publication of v1.5.1

Širokopasovna radijska dostopovna omrežja (BRAN) - Zelo zmogljivo radijsko lokalno omrežje (RLAN) na 5 GHz - Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

Ta dokument velja za zelo zmogljive sisteme brezžičnega dostopa (WAS) na 5 GHz vključno z opremo zelo zmogljivega radijskega lokalnega omrežja (RLAN), ki se uporablja v brezžičnih lokalnih omrežjih. Taka omrežja zagotavljajo hitro podatkovno komunikacijo med napravami, povezanimi z brezžično infrastrukturo. Ta dokument se uporablja tudi za povezave računalnik-računalnik, pri katerem te
naprave med seboj komunicirajo neposredno, brez brezžične infrastrukture.
Ta dokument opisuje tudi zahteve za dostop do spektra, ki omogočajo lažje deljenje spektra z drugo opremo.
Za zelo zmogljive sisteme brezžičnega dostopa (WAS) na 5 Ghz in opremo zelo zmogljivega radijskega lokalnega omrežja se v nadaljnjem besedilu tega standarda uporablja izraz »oprema RLAN«.
Pogoji uporabe spektra za to opremo RLAN so določeni v odločbi ECC (04)08 [5] in Odločbi Komisije 2005/513/ES, kakor je bila spremenjena z Odločbo Komisije 2007/90/EC [7].
Oprema je namenjena za delovanje v frekvenčnih območjih od 5150 MHz do 5350 MHz in od 5470 MHz do 5725 MHz, ki jih je mobilnim storitvam dodelila WRC-03 predvsem za izvajanje zelo zmogljivih sistemov brezžičnega dostopa/zelo zmogljivih radijskih lokalnih omrežij iz tega dokumenta.
Ta dokument je namenjen za obravnavanje določb člena 3.2 direktive R&TTE [1], v kateri je navedeno, da:
»mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja.«

General Information

Status
Published
Publication Date
11-Jan-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Jan-2012
Due Date
16-Mar-2012
Completion Date
12-Jan-2012

Buy Standard

Standard
SIST EN 301 893 V1.6.1:2012 - BARVE na pdf strani 18.
English language
78 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Radio Access Networks (BRAN) - 5 GHz high performance RLAN - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive35.110OmreževanjeNetworking33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 893 Version 1.6.1SIST EN 301 893 V1.6.1:2012en01-februar-2012SIST EN 301 893 V1.6.1:2012SLOVENSKI

STANDARD
SIST EN 301 893 V1.6.1:2012

ETSI EN 301 893 V1.6.1 (2011-11) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

Harmonized European Standard SIST EN 301 893 V1.6.1:2012
ETSI ETSI EN 301 893 V1.6.1 (2011-11) 2

Reference REN/BRAN-0060006 Keywords access, broadband, LAN, layer 1, radio, regulation, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2011. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 893 V1.6.1:2012

ETSI ETSI EN 301 893 V1.6.1 (2011-11) 3 Contents Intellectual Property Rights ................................................................................................................................ 7 Foreword ............................................................................................................................................................. 7 Introduction ........................................................................................................................................................ 7 1 Scope ........................................................................................................................................................ 8 2 References ................................................................................................................................................ 8 2.1 Normative references ......................................................................................................................................... 8 2.2 Informative references ........................................................................................................................................ 9 3 Definitions, symbols and abbreviations ................................................................................................... 9 3.1 Definitions .......................................................................................................................................................... 9 3.2 Symbols ............................................................................................................................................................ 11 3.3 Abbreviations ................................................................................................................................................... 12 4 Technical requirements specifications ................................................................................................... 12 4.1 Environmental profile ....................................................................................................................................... 12 4.2 Centre frequencies ............................................................................................................................................ 13 4.2.1 Definition .................................................................................................................................................... 13 4.2.2 Limits .......................................................................................................................................................... 13 4.2.3 Conformance............................................................................................................................................... 13 4.3 Nominal Channel Bandwidth and Occupied Channel Bandwidth .................................................................... 13 4.3.1 Definition .................................................................................................................................................... 13 4.3.2 Limits .......................................................................................................................................................... 13 4.3.3 Conformance............................................................................................................................................... 13 4.4 RF output power, Transmit Power Control (TPC) and power density ............................................................. 14 4.4.1 Definitions .................................................................................................................................................. 14 4.4.1.1 RF Output Power .................................................................................................................................. 14 4.4.1.2 Transmit Power Control (TPC) ............................................................................................................. 14 4.4.1.3 Power Density ....................................................................................................................................... 14 4.4.2 Limits .......................................................................................................................................................... 14 4.4.2.1 RF output power and power density at the highest power level ............................................................ 14 4.4.2.2 RF output power at the lowest power level of the TPC range ............................................................... 15 4.4.3 Conformance............................................................................................................................................... 15 4.5 Transmitter unwanted emissions ...................................................................................................................... 15 4.5.1 Transmitter unwanted emissions outside the 5 GHz RLAN bands ............................................................. 15 4.5.1.1 Definition .............................................................................................................................................. 15 4.5.1.2 Limits .................................................................................................................................................... 15 4.5.1.3 Conformance ......................................................................................................................................... 15 4.5.2 Transmitter unwanted emissions within the 5 GHz RLAN bands .............................................................. 16 4.5.2.1 Definition .............................................................................................................................................. 16 4.5.2.2 Limits .................................................................................................................................................... 16 4.5.2.3 Conformance ......................................................................................................................................... 16 4.6 Receiver spurious emissions............................................................................................................................. 16 4.6.1 Definition .................................................................................................................................................... 16 4.6.2 Limits .......................................................................................................................................................... 17 4.6.3 Conformance............................................................................................................................................... 17 4.7 Dynamic Frequency Selection (DFS) ............................................................................................................... 17 4.7.1 Introduction................................................................................................................................................. 17 4.7.1.1 Applicable frequency range .................................................................................................................. 17 4.7.1.2 DFS operational modes ......................................................................................................................... 17 4.7.1.3 DFS operation ....................................................................................................................................... 18 4.7.2 DFS technical requirements specifications ................................................................................................. 19 4.7.2.1 Channel Availability Check .................................................................................................................. 19 4.7.2.1.1 Definition......................................................................................................................................... 19 4.7.2.1.2 Limit ................................................................................................................................................ 19 4.7.2.1.3 Conformance ................................................................................................................................... 19 SIST EN 301 893 V1.6.1:2012

ETSI ETSI EN 301 893 V1.6.1 (2011-11) 4 4.7.2.2 Off-Channel CAC (Off-Channel Channel Availability Check) (Optional) ........................................... 20 4.7.2.2.1 Definition......................................................................................................................................... 20 4.7.2.2.2 Limit ................................................................................................................................................ 20 4.7.2.2.3 Conformance ................................................................................................................................... 20 4.7.2.3 In-Service Monitoring ........................................................................................................................... 20 4.7.2.3.1 Definition......................................................................................................................................... 20 4.7.2.3.2 Limit ................................................................................................................................................ 20 4.7.2.3.3 Conformance ................................................................................................................................... 20 4.7.2.4 Channel Shutdown ................................................................................................................................ 20 4.7.2.4.1 Definition......................................................................................................................................... 20 4.7.2.4.2 Limit ................................................................................................................................................ 21 4.7.2.4.3 Conformance ................................................................................................................................... 21 4.7.2.5 Non-Occupancy Period ......................................................................................................................... 21 4.7.2.5.1 Definition......................................................................................................................................... 21 4.7.2.5.2 Limit ................................................................................................................................................ 21 4.7.2.5.3 Conformance ................................................................................................................................... 21 4.7.2.6 Uniform Spreading ................................................................................................................................ 21 4.7.2.6.1 Definition......................................................................................................................................... 21 4.7.2.6.2 Limit ................................................................................................................................................ 22 4.8 Medium Access Protocol .................................................................................................................................. 22 4.8.1 Definition .................................................................................................................................................... 22 4.8.2 Requirement ................................................................................................................................................ 22 4.9 Adaptivity (Channel Access Mechanism) ........................................................................................................ 22 4.9.1 Definition .................................................................................................................................................... 22 4.9.2 Requirements & Limits ............................................................................................................................... 22 4.9.2.1 Frame Based Equipment ....................................................................................................................... 22 4.9.2.2 Load Based Equipment ......................................................................................................................... 23 4.9.2.3 Short Control Signalling Transmissions................................................................................................ 24 4.9.2.3.1 Definition......................................................................................................................................... 24 4.9.2.3.2 Limits .............................................................................................................................................. 24 4.9.3 Conformance............................................................................................................................................... 24 4.10 User Access Restrictions .................................................................................................................................. 25 4.10.1 Definition .................................................................................................................................................... 25 4.10.2 Requirement ................................................................................................................................................ 25 5 Testing for compliance with technical requirements .............................................................................. 25 5.1 Conditions for testing ....................................................................................................................................... 25 5.1.1 Normal and extreme test conditions............................................................................................................ 25 5.1.2 Test sequences and traffic load ................................................................................................................... 25 5.1.2.1 General test transmission sequences ..................................................................................................... 25 5.1.2.2 Test transmission sequences for DFS tests ............................................................................................ 26 5.1.3 Test channels .............................................................................................................................................. 26 5.1.4 Antennas ..................................................................................................................................................... 27 5.1.4.1 Integrated and dedicated antennas ......................................................................................................... 27 5.1.4.2 Transmit operating modes ..................................................................................................................... 27 5.1.4.2.1 Operating mode 1 (single antenna) .................................................................................................. 27 5.1.4.2.2 Operating mode 2 (multiple antennas, no beamforming) ................................................................ 27 5.1.4.2.3 Operating mode 3 (multiple antennas, with beamforming) ............................................................. 27 5.1.5 Presentation of equipment .......................................................................................................................... 27 5.1.5.1 Testing of host connected equipment and plug-in radio devices ........................................................... 27 5.1.5.1.1 The use of a host or test jig for testing plug-in radio devices .......................................................... 28 5.1.5.1.2 Testing of combinations .................................................................................................................. 28 5.2 Interpretation of the measurement results ........................................................................................................ 29 5.3 Essential radio test suites .................................................................................................................................. 29 5.3.1 Product information .................................................................................................................................... 29 5.3.2 Carrier frequencies ...................................................................................................................................... 31 5.3.2.1 Test conditions ...................................................................................................................................... 31 5.3.2.2 Test methods ......................................................................................................................................... 31 5.3.2.2.1 Conducted measurement.................................................................................................................. 31 5.3.2.2.2 Radiated measurement ..................................................................................................................... 31 5.3.3 Occupied Channel Bandwidth .................................................................................................................... 32 5.3.3.1 Test conditions ...................................................................................................................................... 32 SIST EN 301 893 V1.6.1:2012

ETSI ETSI EN 301 893 V1.6.1 (2011-11) 5 5.3.3.2 Test method ........................................................................................................................................... 32 5.3.3.2.1 Conducted measurement.................................................................................................................. 32 5.3.3.2.2 Radiated measurement ..................................................................................................................... 33 5.3.4 RF output power, Transmit Power Control (TPC) and power density ........................................................ 33 5.3.4.1 Test conditions ...................................................................................................................................... 33 5.3.4.2 Test method ........................................................................................................................................... 33 5.3.4.2.1 Conducted measurement.................................................................................................................. 33 5.3.4.2.2 Radiated measurement ..................................................................................................................... 42 5.3.5 Transmitter unwanted emissions outside the 5 GHz RLAN bands ............................................................. 42 5.3.5.1 Test conditions ...................................................................................................................................... 42 5.3.5.2 Test method ........................................................................................................................................... 43 5.3.5.2.1 Conducted measurement.................................................................................................................. 43 5.3.5.2.2 Radiated measurement ..................................................................................................................... 45 5.3.6 Transmitter unwanted emissions within the 5 GHz RLAN bands .............................................................. 45 5.3.6.1 Test conditions ...................................................................................................................................... 45 5.3.6.2 Test method ........................................................................................................................................... 46 5.3.6.2.1 Conducted measurement.................................................................................................................. 46 5.3.6.2.2 Radiated measurement ..................................................................................................................... 47 5.3.7 Receiver spurious emissions ....................................................................................................................... 47 5.3.7.1 Test conditions ...................................................................................................................................... 47 5.3.7.2 Test method ........................................................................................................................................... 47 5.3.7.2.1 Conducted measurement.................................................................................................................. 47 5.3.7.2.2 Radiated measurement ..................................................................................................................... 48 5.3.8 Dynamic Frequency Selection (DFS) ......................................................................................................... 48 5.3.8.1 Test conditions ...................................................................................................................................... 48 5.3.8.1.1 Selection of radar test signals .......................................................................................................... 49 5.3.8.1.2 Test set-ups ...................................................................................................................................... 49 5.3.8.2 Test Method .......................................................................................................................................... 50 5.3.8.2.1 Conducted measurement.................................................................................................................. 50 5.3.8.2.2 Radiated measurement ..................................................................................................................... 58 5.3.9 Adaptivity (Channel access mechanism) .................................................................................................... 58 5.3.9.1 Test conditions ...................................................................................................................................... 58 5.3.9.2 Test Method .......................................................................................................................................... 58 5.3.9.2.1 Conducted measurements ................................................................................................................ 58 5.3.9.2.2 Generic test procedure for measuring channel/frequency usage ..................................................... 60 5.3.9.2.3 Radiated measurements ................................................................................................................... 61 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) ................................................................................................................ 62 Annex B (normative): Test sites and arrangements for radiated measurements ........................... 64 B.1 Test sites ................................................................................................................................................. 64 B.1.1 Open air test sites ............................................................................................................................................. 64 B.1.2 Anechoic chamber ............................................................................................................................................ 65 B.1.2.1 General ........................................................................................................................................................ 65 B.1.2.2 Description .................................................................................................................................................. 65 B.1.2.3 Influence of parasitic reflections ................................................................................................................. 65 B.1.2.4 Calibration and mode of use ....................................................................................................................... 65 B.2 Test antenna ............................................................................................................................................ 67 B.3 Substitution antenna ............................................................................................................................... 67 Annex C (normative): General description of measurement ........................................................... 68 C.1 Conducted measurements ....................................................................................................................... 68 C.2 Radiated measurements .......................................................................................................................... 68 C.3 Substitution measurement ...................................................................................................................... 69 Annex D (normative): DFS parameters ............................................................................................. 70 SIST EN 301 893 V1.6.1:2012

ETSI ETSI EN 301 893 V1.6.1 (2011-11) 6 Annex E (informative): Guidance for testing IEEE 802.11n™ Devices ............................................ 74 E.1 Introduction ............................................................................................................................................ 74 E.2 Possible Modulations ............................................................................................................................. 74 E.2.1 Guidance for Testing ........................................................................................................................................ 74 E.2.1.1 Modulation Used for Conformance Testing ............................................................................................... 74 E.3 Possible Operating Modes ...................................................................................................................... 75 E.3.1 Guidance for Testing ........................................................................................................................................ 75 Annex F (informative): The EN title in the

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.