Space Engineering - Thermal design handbook - Part 6: Thermal Control Surfaces

This Part 6 of the spacecraft thermal control and design data handbooks, provides information on coatings on spacecrafts for the purposes of thermal and thermo-optical regulation.
Properties of pigmented and contact coatings, are described and are classified according to their thermal radiation characteristics.
Also included in this Part are the properties and characteristics of foils and tapes with particular emphasis on their adhesive characteristics; these are not classified according to their thermal radiation properties.
The Thermal design handbook is published in 16 Parts
TR 17603-31-01 Part 1
Thermal design handbook – Part 1: View factors
TR 17603-31-01 Part 2
Thermal design handbook – Part 2: Holes, Grooves and Cavities
TR 17603-31-01 Part 3
Thermal design handbook – Part 3: Spacecraft Surface Temperature
TR 17603-31-01 Part 4
Thermal design handbook – Part 4: Conductive Heat Transfer
TR 17603-31-01 Part 5
Thermal design handbook – Part 5: Structural Materials: Metallic and Composite
TR 17603-31-01 Part 6
Thermal design handbook – Part 6: Thermal Control Surfaces
TR 17603-31-01 Part 7
Thermal design handbook – Part 7: Insulations
TR 17603-31-01 Part 8
Thermal design handbook – Part 8: Heat Pipes
TR 17603-31-01 Part 9
Thermal design handbook – Part 9: Radiators
TR 17603-31-01 Part 10
Thermal design handbook – Part 10: Phase – Change Capacitors
TR 17603-31-01 Part 11
Thermal design handbook – Part 11: Electrical Heating
TR 17603-31-01 Part 12
Thermal design handbook – Part 12: Louvers
TR 17603-31-01 Part 13
Thermal design handbook – Part 13: Fluid Loops
TR 17603-31-01 Part 14
Thermal design handbook – Part 14: Cryogenic Cooling
TR 17603-31-01 Part 15
Thermal design handbook – Part 15: Existing Satellites
TR 17603-31-01 Part 16
Thermal design handbook – Part 16: Thermal Protection System

Raumfahrttechnik - Handbuch für thermisches Design - Teil 6: Oberflächen zur Thermalkontrolle

Ingénierie spatiale - Manuel de conception thermique - Partie 6: Revêtements de Contrôle Thermique

Vesoljska tehnika - Priročnik o toplotni zasnovi - 6. del: Toplotne nadzorne površine

General Information

Status
Published
Public Enquiry End Date
19-May-2021
Publication Date
19-Aug-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Aug-2021
Due Date
21-Oct-2021
Completion Date
20-Aug-2021

Buy Standard

Technical report
TP CEN/CLC/TR 17603-31-06:2021
English language
342 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTP FprCEN/CLC/TR 17603-31-06:2021
English language
342 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/CLC/TR 17603-31-06:2021
01-oktober-2021
Vesoljska tehnika - Priročnik o toplotni zasnovi - 6. del: Toplotne nadzorne
površine
Space Engineering - Thermal design handbook - Part 6: Thermal Control Surfaces
Raumfahrttechnik - Handbuch für thermisches Design - Teil 6: Oberflächen zur
Thermalkontrolle
Ingénierie spatiale - Manuel de conception thermique - Partie 6: Revêtements de
Contrôle Thermique
Ta slovenski standard je istoveten z: CEN/CLC/TR 17603-31-06:2021
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST-TP CEN/CLC/TR 17603-31-06:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021

---------------------- Page: 2 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021


TECHNICAL REPORT
CEN/CLC/TR 17603-31-
06
RAPPORT TECHNIQUE

TECHNISCHER BERICHT

August 2021
ICS 49.140

English version

Space Engineering - Thermal design handbook - Part 6:
Thermal Control Surfaces
Ingénierie spatiale - Manuel de conception thermique - Raumfahrttechnik - Handbuch für thermisches Design -
Partie 6: Revêtements de Contrôle Thermique Teil 6: Oberflächen zur Thermalkontrolle


This Technical Report was approved by CEN on 21 June 2021. It has been drawn up by the Technical Committee CEN/CLC/JTC 5.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
























CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2021 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. CEN/CLC/TR 17603-31-06:2021 E
reserved worldwide for CEN national Members and for
CENELEC Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
Table of contents
European Foreword . 14
1 Scope . 15
2 References . 16
3 Terms, definitions and symbols . 17
3.1 Terms and definitions . 17
3.2 Abbreviated terms. 17
3.3 Symbols . 18
4 General introduction . 21
5 Coatings . 23
5.1 General . 23
5.2 Solar reflectors . 25
5.2.1 Titanium Dioxide-Polymethyl Vinyl Siloxane . 25
5.2.2 Zinc Oxide-Potassium Silicate . 32
5.2.3 Zinc Orthotitanate-Potassium Silicate . 52
5.2.4 Zinc Oxide-Methylsilicone . 136
5.2.5 Zinc Oxide-Potassium Silicate . 163
5.2.6 Silver vacuum deposited on fused Silica . 196
5.2.7 Silver vacuum deposited on fused Silica with a conductive coating . 251
5.3 Total reflectors . 274
5.3.1 Leafing Aluminium-Silicone . 274
5.4 Total absorbers . 279
5.4.1 Carbon black-Acrylic resin . 279
6 Adhesive tapes . 283
6.1 General . 283
6.1.2 Adhesive properties . 283
6.1.3 Curing of adhesive tapes. 285
6.1.4 General purpose adhesive tapes. 286
6.2 Application and handling . 298
6.2.1 Application . 298
2

---------------------- Page: 4 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
6.2.2 Cleaning . 298
6.2.3 Handling . 299
6.2.4 Repairing . 300
6.3 Degradation . 300
6.3.1 Introduction . 300
6.3.2 Terrestrial degradation . 300
6.3.3 Space degradation . 300
6.3.4 Blistering . 304
6.4 Relevant properties of thermal control tapes . 307
6.5 Past spatial use . 331
Bibliography . 333

Figures
Figure 4-1: Basic types of thermal control coatings. T [K] is the equilibrium
R
temperature of a coated isothermal sphere at 1 AU. From Touloukian,
DeWitt & Hernicz (1972) [126]. . 21
Figure 4-2: Range of solar absorptance, α , and hemispherical total emittance, ε,
s
covered by available thermal control coatings. From Touloukian, DeWitt &
Hernicz (1972) [126]. . 22
Figure 5-1: UV radiation effects on solar absorptance, α , of Thermatrol 2A-100 vs.
s
exposure time, t. From Breuch (1967) [22]. . 28
Figure 5-2: Change in solar absorptance, ∆α , of Thermatrol 2A-100, under various
s
radiation conditions, vs. exposure time, t. From McCargo et al. (1971) [82]. . 28
Figure 5-3: Normal-hemispherical spectral reflectance, ρ ', of Thermatrol 2A-100,
λ
measured by two different methods, vs. wavelength, λ. From Cunnington,
Grammer & Smith (1969) [33]. . 29
Figure 5-4: Effect of Ultra-Violet Radiation on spectral reflectance, ρ ', of Thermatrol
λ
2A-100 vs. wavelength, λ. Most of the data, concerning bidirectional
reflectance, are from Rittenhouse & Singletary (1969) [105], while dashed
line and dotted line, normal-hemispherical reflectance, are from
Cunnington, Grammer & Smith (1969) [33]. . 30
Figure 5-5: Variation of solar absorptance, α , with thickness, t . From Stevens (1971)
s c
[120]. . 36
Figure 5-6: Estimated changes in the solar absorptance, α , of Z-93 during the total
s
mission profile for a near-Earth orbit. From McCargo, Spradley, Greenberg
& McDonald (1971) [82]. . 45
Figure 5-7: Normal-hemispherical spectral reflectance, ρ ', of Z-93 vs. wavelength, λ.
λ
All data are from Touloukian, DeWitt & Hernicz (1972) [126] except solid
and dashed lines which are from Cunnington, Grammer & Smith (1969)
[33]. . 47
Figure 5-8: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ ', of Z-93 vs. wavelength, λ. Data points are from Touloukian,
λ
3

---------------------- Page: 5 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
DeWitt & Hernicz (1972) [126], while smooth curves are from Cunnington,
Grammer & Smith (1969) [33]. . 49
Figure 5-9: Effect of Proton Radiation on normal-hemispherical spectral reflectance, ρ ',
λ
of Z-93 vs. wavelength, λ. From Touloukian, DeWitt & Hernicz (1972) [126]. . 50
Figure 5-10: Hemispherical total emittance, ε, of Zinc Orthotitanate-Potassium Silicate
Coatings vs. temperature, T. : SSR pigment,> phosphated. From Keyte
(1975) [70]. : MOX pigment,> YB-71. From Harada & Wilkes (1979) [58].
: YB-71.> AESC. From Ahern & Karperos (1983) [4]. . 60
Figure 5-11: Solar absorptance, α , of YB-71 vs. thickness, t . : From Harada &
s c
Wilkes (1979) [58]. : From measurements on 16 panels by AESC.
Scatter is due to t variation. From Ahern & Karperos (1983) [4]. . 60
c
Figure 5-12: Solar absorptance, α , of Zinc Orthotitanate-Potassium Silicate coating vs.
s
incidence angle, β. SSR pigment, phosphated. From Keyte (1975) [70]. . 63
Figure 5-13: Solar absorptance, α , of several YB-71 coatings vs. exposure time, t, as
s
deduced from data of various spacecraft in geosynchronous orbits.
Numbers corresponds to sample designations. . 74
Figure 5-14: Normal-hemispherical spectral reflectance, ρ'λ, of Zinc Orthotinanate-
Potassium Silicate coatings vs. wavelength, λ. . 76
Figure 5-15: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of Zinc Orthotitanate- Potassium Silicate coatings vs.
λ
wavelength, λ. . 78
Figure 5-16: Effect of Protons Radiation on normal-hemispherical spectral reflectance,
ρ' , of Zinc Orthotitanate-Potassium Silicate coatings vs. wavelength, λ.
λ
From Gilligan & Zerlaut (1971) [46]. . 79
Figure 5-17: Hemispherical total emittance, ε, of S-13 G coating vs. temperature, T. 2 x
-4
10 m thick coating on molybdenum substrate. From Spisz & Jack (1971)
[119]. . 85
Figure 5-18: Hemispherical total emittance, ε, of S-13 and S-13 G coatings vs.
exposure time, t, at 1-Sun level and 395 K. From Cunnington, Grammer &
Smith (1969) [33]. Equal symbols correspond to the same sample. :>
Sample 27; :> Sample 43; :> Sample 28; :> Sample 44. . 87
Figure 5-19: Variation of solar absorptance, α , of S-13 coating with coating thickness, t
s
. :> Nominal composition. Sprayed on primed surface. Air dryed. T =
c
298 K. (Designation in the ref.: 119 to 127). :> ZnO in silicone binder. T =
298 K. (Designation in the ref.: 29, 30). From Touloukian, DeWitt & Hernicz
(1972) [126]. . 89
Figure 5-20: Solar absorptance, α , of S-13 G coating vs. incidence angle, β. From
s
Keyte (1975) [70]. . 90
Figure 5-21: Change in solar absorptance, ∆α , of S-13 and S-13 G coatings due to
s
Protons and Alpha Particles Radiation vs. integrated flux, n. . 94
Figure 5-22: Change in solar absorptance, ∆α , of S-13 G coating due to Electrons
s
Radiation vs. integrated flux, n. Data taken in situ. Compiled by Bourrieau,
Paillous & Romer (1976) [21]. . 96
Figure 5-23: Changes in solar absorptance of S-13 and S-13 G coatings. OSO III
experiment. From Millard (1969) [84]. . 98
4

---------------------- Page: 6 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-24: Change in solar absorptance, ∆αs, of S-13 coatings vs. flight time in ESH
as measured in orbital flight. Prepared by the compiler after Touloukian,
DeWitt & Hernicz (1972) [126]. . 99
Figure 5-25: Change in solar absorptance, ∆α , of S-13 G coating vs. flight time in ESH
s
as measured in orbital flight. Prepared by the compiler after Touloukian,
DeWitt & Hernicz (1972) [126]. . 100
Figure 5-26: Position on the sample holder of the samples 1 and 2, for irradiation and
measurement. From Paillous (1976) [96]. . 104
Figure 5-27: Solar absorptance, α , of S-13 G/LO coating vs. flight time, . 105
s
Figure 5-28: Variation of absorptance to emittance ratio, α/ε, of S-13 coating vs. flight
time. Prepared by the compiler after Touloukian, DeWitt & Hernicz (1972)
and Triolo (1973) [126] . 106
Figure 5-29: Variation of absorptance to emittance ratio, α/ε, of S-13 G coating vs. flight
time. Prepared by the compiler after Touloukian, DeWitt & Hernicz (1972)
[126]. . 107
Figure 5-30: Normal-hemispherical spectral reflectance, ρ' , of S-13 coating vs.
λ
wavelength, l, for five different values of P-VC. G.E. LTV-602 binder. From
Touloukian, DeWitt & Hernicz (1972) [126]. . 108
Figure 5-31: Effect of Ultra-violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 coating vs. wavelength, λ. LTV-602 silicone binder.
λ
Two different pigment-binder ratios (PBR). From Touloukian, DeWitt &
Hernicz (1972) [126]. . 109
Figure 5-32: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 coating vs. wavelength, λ. Several binders and
λ
PBRs. From Touloukian, DeWitt & Hernicz (1972) [126]. . 110
Figure 5-33: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 coating vs. wavelength, λ. From Touloukian, DeWitt
λ
& Hernicz (1972) [126]. . 111
Figure 5-34: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 coating vs. wavelength, λ. From Zerlaut, Rogers &
λ
Noble (1969) [144]. Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 112
Figure 5-35: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Two different pigment
λ
treatment processes. From Zerlaut, Rogers & Noble (1969) [144]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 113
Figure 5-36: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Sweated pigment.
λ
Two different solvent systems. From Zerlaut, Rogers & Noble (1969) [144].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 114
Figure 5-37: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Two different pigment
λ
treatment processes. Owens-Illinois 650 binder. From Zerlaut, Rogers &
Noble (1969) [144]. Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 115
Figure 5-38: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Pigment was sifted
λ
prior to wet grinding. Paint grind time 3 h. From Zerlaut, Rogers & Noble
(1969) [144]. Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 116
5

---------------------- Page: 7 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-39: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Silicated pigment with
λ
five mechanical perturbations. From Zerlaut, Rogers & Noble (1969) [144].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 117
Figure 5-40: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Plasma annealed and
λ
potassium silicate treated pigment. From Gilligan & Zerlaut (1971) [46]. . 118
Figure 5-41: Protons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of S-13 coating vs. wavelength, λ. LTV-602 silicone binder. From
λ
Gillette, Brown, Seiler & Sheldon (1966) [54]. Drawn from Touloukian,
DeWitt & Hernicz (1972) [126]. . 120
Figure 5-42: Protons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of S-13 G coating vs. wavelength, λ. Plasma annealed and potassium
λ
silicate treated pigment. From Gilligan & Zerlaut (1971) [46]. . 121
Figure 5-43: Electrons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of S-13 G coating vs. wavelength, λ. Radiation intensity 20 keV.
λ
Recovery after exposure. From Fogdall, Cannaday & Brown (1970) [43].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 122
Figure 5-44: Electrons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of S-13 G coating vs. wavelength, λ. Radiation intensity 80 keV.
λ
Recovery after exposure. From Fogdall, Cannaday & Brown (1970) [43].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 124
Figure 5-45: Electrons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of GSFC, 101-7 coating vs. wavelength, λ. Radiation intensity 20 keV.
λ
Different integrated fluxes. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 125
Figure 5-46: Electrons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of GSFC, 101-7 coating vs. wavelength, λ. Radiation intensity 80 keV.
λ
Different integrated fluxes. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday & Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 126
Figure 5-47: Electrons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of GSFC, 101-7 coating vs. wavelength, λ. Radiation intensity 20 keV.
λ
Recovery after exposure. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday & Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 127
Figure 5-48: Electrons exposure effects on normal-hemispherical spectral reflectance,
ρ' , of GSFC, 101-7 coating vs. wavelength, λ. Radiation intensity 80 keV.
λ
Recovery after exposure. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 128
Figure 5-49: Effect of Combined Exposure on normal-hemispherical spectral
reflectance, ρ' , of S-13 G coating vs. wavelength, λ. Plasma annealed and
λ
potassium silicate treated pigment. From Gilligan & Zerlaut (1971) [46]. . 130
Figure 5-50: Effect of Combined Exposure, simulating up to three years in
geosynchronous orbit, on normal- hemispherical spectral reflectance, ρ' , of
λ
S-13 G/LO coating vs. wavelength, λ. From Paillous (1976) [96]. . 131
6

---------------------- Page: 8 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-51: Effect of O bleaching, after Combined Exposure, on normal-hemispherical
2
spectral reflectance, ρ' , of S-13 G/LO coating vs. wavelength, λ. Curves of
λ
and are those shown in Figure 5-19. From Paillous (1976)
[96]. . 132
Figure 5-52: Effect of Combined Exposure, simulating up to three years in
geosynchronous orbit, on normal- hemispherical spectral reflectance, ρ' , of
λ
S-13 G/LO coating vs. wavelength, λ. Curves of and are
those shown in Figure 5-50. From Paillous (1976) [96]. . 133
Figure 5-53: Change in normal-hemispherical spectral absorptance, ∆α' , of PSG 120
λ
coating, due to Ultra-Violet Radiation, vs. exposure time, t. Wavelength, λ =
−6
0,46x10 m. From Simon (1974) [118]. . 140
Figure 5-54: Change in normal-hemispherical spectral absorptance, ∆α' , of PSG 120
λ
coating, due to Ultra-Violet Radiation, vs. exposure time, t. Wavelength, λ =
−6
2,5x10 m. Shaded zone in a is enlarged in b. See Explanation in the
caption of Figure 5-53. From Simon (1974) [118]. . 141
Figure 5-55: Change in solar absorptance, ∆α , of PSG 120 coating, due to UV
s
radiation, vs. exposure time, t. Shaded zone in a is enlarged in b. From
Simon (1974) [118]. . 142
Figure 5-56: Estimated change in solar absorptance, α , of PSG 120 vs. time, t. From
s
Paillous (1976) [96]. : From Guillaumon & Guillin (1981) [52]. . 148
Figure 5-57: Bidirectional total radiation intensity of reflected flux, i'', vs. cone angle, β',
for several values of the cone angle of the incident flux, β. PSG 120
coating. Incident and reflected fluxes are coplanar. i'' is measured by the
response of a photocell attached to a photogoniometer. From ASTRAL
(1976)a [6]. . 148
Figure 5-58: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of PSG 120 coating vs. wavelength, λ. Thick line: Before
λ
−5
irradiation. p<1,3x10 Pa. T = 348 K. Thin line: After irradiation.
−5
p<1,3x10 Pa. T = 348 K. A Sun level. t = 212 ESH. From Simon (1973)
[117]. . 149
Figure 5-59: Effect of Protons radiation on normal-hemispherical spectral reflectance,
ρ' , of PSG 120 coating vs. wavelength, λ. Radiation intensity ≅ 45 keV.
λ
See Explanation in the caption of Figure 5-61. From Paillous, Amat, Marco
& Panabiere (1977) [97]. . 150
Figure 5-60: Effect of Protons radiation on normal-hemispherical spectral reflectance,
ρ' , of PSG 120 coating vs. wavelength, λ. Radiation intensity ≅ 75 keV.
λ
See Explanation in the caption of Figure 5-61. From Paillous, Amat, Marco
& Panabiere (1977) [97]. . 151
Figure 5-61: Effect of Protons radiation on normal-hemispherical spectral reflectance,
ρ' , of PSG 120 coating vs. wavelength, λ. Radiation intensity ≅ 150 keV.
λ
From Paillous, Amat, Marco & Panabiere (1977) [97]. . 151
Figure 5-62: Effect of Electrons Radiation on normal-hemispherical spectral
reflectance, ρ' , of PSG 120 coating vs. wavelength, λ. Radiation intensity ≅
λ
40 keV. See Explanation in the caption of Figure 5-63. From Paillous,
Amat, Marco & Panabiere (1977) [97]. . 153
Figure 5-63: Effect of Electrons Radiation on normal-hemispherical spectral
reflectance, ρ' , of PSG 120 coating vs. wavelength, λ. Radiation intensity ≅
λ
80 keV. From Paillous, Amat, Marco & Panabiere (1977) [97]. . 153
7

---------------------- Page: 9 ----------------------
SIST-TP CEN/CLC/TR 17603-31-06:2021
CEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-64: Effect of Electrons Radiation on normal-hemispherical spectral
reflectance, ρ' , of PSG 120 coating vs. wavelength, λ. Radiation intensity ≅
λ
210 keV. From Paillous, Amat, Marco & Panabiere (1977) [97]. . 154
Figure 5-65: Change in normal-hemispherical spectral reflectance, ρ' , of PSG 120
λ
coating, due to particulate irradiation, vs. penetration range, X .
d
−6
Wavelength, λ = 2,05x10 m. From Bourrieau (1978) [19]. . 157
Figure 5-66: Effect of Combined Exposure, simulating up to three years in
geosyncronous orbit, on normal-hemispherical spectral reflectance, ρ' , of
λ
PSG 120 coating vs. wavelength, λ. From Paillous (1976) [96]. . 157
Figure 5-67: Effect of O bleaching, after Combined Exposure, on normal-
2
hemispherical spectral reflectance, ρ' , of PSG 120 coating vs. wavelength,
λ
λ. Curves and are those shown in Figure 5-66. From
Paillous (1976) [96]. . 158
Figure 5-68: Change in normal-hemispherical spectral absorptance, ∆α' , of PSZ 184
λ
coating, due to UV Radiation, vs. exposure time, t. Wavelength, λ =
−6
0,46x10 m. See Explanation in the caption of Figure 5-69. From Simon
(1974) [118]. . 166
Figure 5-69: Change in normal-hemispherical spectral absorptance, ∆α' , of PSZ 184
λ
coating, due to UV Radiation, vs. exposure time, t. Wavelength, λ =
−6
2,5x10 m. From Simon (1974) [118]. 167
Figure 5-70: Change in solar absorptance, ∆α , of PSZ 184 coating, due to UV
s
Radiation, vs. exposure time, t. Shaded zone in a is enlarged in b. From
Simon (1974) [118]. . 168
Figure 5-71: Estimated change in solar absorptance, α , of PSZ 184 vs. time, t. From
s
Paillous (1976) [96]. . 173
Figure 5-72: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ρ' , of PSZ 184 coating vs. wavelength, λ. Thick line: Before
λ
−5 −5
irradiation. p<1,3x10 Pa. Thin line: After irradiation. p<1,3x10 Pa. 1 Sun
level. Neither sample temperature nor exposure time are given. From
Simon (1974) [118]. . 174
Figure 5-73: Effect of Protons Radiation on normal-hemispherical spectral reflectance,
ρ' , of PSZ 184 coating vs. wavelength, λ. a Coating on P 131 primer. b
λ
Coating on silicated primer. Radiation intensity ≅ 45 keV. See Explanation
in the caption of Figure 5-74. From Paillous, Amat, Marco & Panabiere
(1977) [97]. . 175
Figure 5-74: Effect of Protons Radiation on normal-hemispherical spectral reflectance,
ρ'λ, of PSZ 184 coating, on silicated primer, vs. wavelength, λ. Radiation
intensity ≅ 75 keV. From Paillous, Amat, Marco & Panabiere (1977) [97]. . 176
Figure 5-75: Effect of Protons Radiation on normal-hemispherical spectral reflectance,
ρ' , of PSZ 184 coating, on silicated primer, vs. wavelength, λ. Radia
...

SLOVENSKI STANDARD
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
01-maj-2021
Vesoljska tehnika - Priročnik za toplotno zasnovo - 6. del: Toplotne nadzorne
površine
Space Engineering - Thermal design handbook - Part 6: Thermal Control Surfaces
Raumfahrttechnik - Handbuch für thermisches Design - Teil 6: Oberflächen zur
Thermalkontrolle
Ingénierie spatiale - Manuel de conception thermique - Partie 6: Revêtements de
Contrôle Thermique
Ta slovenski standard je istoveten z: FprCEN/CLC/TR 17603-31-06
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
kSIST-TP FprCEN/CLC/TR 17603-31- en,fr,de
06:2021
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021

---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021


TECHNICAL REPORT
FINAL DRAFT
FprCEN/CLC/TR 17603-
RAPPORT TECHNIQUE
31-06
TECHNISCHER BERICHT


February 2021
ICS 49.140

English version

Space Engineering - Thermal design handbook - Part 6:
Thermal Control Surfaces
Ingénierie spatiale - Manuel de conception thermique - Raumfahrttechnik - Handbuch für thermisches Design -
Partie 6: Revêtements de Contrôle Thermique Teil 6: Oberflächen zur Thermalkontrolle


This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.




















CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2021 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. FprCEN/CLC/TR 17603-31-06:2021 E
reserved worldwide for CEN national Members and for
CENELEC Members.

---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
Table of contents
European Foreword . 14
1 Scope . 15
2 References . 16
3 Terms, definitions and symbols . 17
3.1 Terms and definitions . 17
3.2 Abbreviated terms. 17
3.3 Symbols . 18
4 General introduction . 21
5 Coatings . 23
5.1 General . 23
5.2 Solar reflectors . 25
5.2.1 Titanium Dioxide-Polymethyl Vinyl Siloxane . 25
5.2.2 Zinc Oxide-Potassium Silicate . 32
5.2.3 Zinc Orthotitanate-Potassium Silicate . 52
5.2.4 Zinc Oxide-Methylsilicone . 136
5.2.5 Zinc Oxide-Potassium Silicate . 163
5.2.6 Silver vacuum deposited on fused Silica . 196
5.2.7 Silver vacuum deposited on fused Silica with a conductive coating . 251
5.3 Total reflectors . 274
5.3.1 Leafing Aluminium-Silicone . 274
5.4 Total absorbers . 279
5.4.1 Carbon black-Acrylic resin . 279
6 Adhesive tapes . 283
6.1 General . 283
6.1.2 Adhesive properties . 283
6.1.3 Curing of adhesive tapes. 285
6.1.4 General purpose adhesive tapes. 286
6.2 Application and handling . 298
6.2.1 Application . 298
2

---------------------- Page: 4 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
6.2.2 Cleaning . 298
6.2.3 Handling . 299
6.2.4 Repairing . 300
6.3 Degradation . 300
6.3.1 Introduction . 300
6.3.2 Terrestrial degradation . 300
6.3.3 Space degradation . 300
6.3.4 Blistering . 304
6.4 Relevant properties of thermal control tapes . 307
6.5 Past spatial use . 331
Bibliography . 333

Figures
Figure 4-1: Basic types of thermal control coatings. T [K] is the equilibrium
R
temperature of a coated isothermal sphere at 1 AU. From Touloukian,
DeWitt & Hernicz (1972) [126]. . 21
Figure 4-2: Range of solar absorptance,  , and hemispherical total emittance, ,
s
covered by available thermal control coatings. From Touloukian, DeWitt &
Hernicz (1972) [126]. . 22
Figure 5-1: UV radiation effects on solar absorptance,  , of Thermatrol 2A-100 vs.
s
exposure time, t. From Breuch (1967) [22]. . 28
Figure 5-2: Change in solar absorptance,  , of Thermatrol 2A-100, under various
s
radiation conditions, vs. exposure time, t. From McCargo et al. (1971) [82]. . 28
Figure 5-3: Normal-hemispherical spectral reflectance,  ', of Thermatrol 2A-100,

measured by two different methods, vs. wavelength, . From Cunnington,
Grammer & Smith (1969) [33]. . 29
Figure 5-4: Effect of Ultra-Violet Radiation on spectral reflectance,  ', of Thermatrol

2A-100 vs. wavelength, . Most of the data, concerning bidirectional
reflectance, are from Rittenhouse & Singletary (1969) [105], while dashed
line and dotted line, normal-hemispherical reflectance, are from
Cunnington, Grammer & Smith (1969) [33]. . 30
Figure 5-5: Variation of solar absorptance,  , with thickness, t . From Stevens (1971)
s c
[120]. . 36
Figure 5-6: Estimated changes in the solar absorptance,  , of Z-93 during the total
s
mission profile for a near-Earth orbit. From McCargo, Spradley, Greenberg
& McDonald (1971) [82]. . 45
Figure 5-7: Normal-hemispherical spectral reflectance,  ', of Z-93 vs. wavelength, .

All data are from Touloukian, DeWitt & Hernicz (1972) [126] except solid
and dashed lines which are from Cunnington, Grammer & Smith (1969)
[33]. . 47
Figure 5-8: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance,  ', of Z-93 vs. wavelength, . Data points are from Touloukian,

3

---------------------- Page: 5 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
DeWitt & Hernicz (1972) [126], while smooth curves are from Cunnington,
Grammer & Smith (1969) [33]. . 49
Figure 5-9: Effect of Proton Radiation on normal-hemispherical spectral reflectance,  ',

of Z-93 vs. wavelength, . From Touloukian, DeWitt & Hernicz (1972) [126]. . 50
Figure 5-10: Hemispherical total emittance, , of Zinc Orthotitanate-Potassium Silicate
Coatings vs. temperature, T. : SSR pigment,> phosphated. From Keyte
(1975) [70]. : MOX pigment,> YB-71. From Harada & Wilkes (1979) [58].
: YB-71.> AESC. From Ahern & Karperos (1983) [4]. . 60
Figure 5-11: Solar absorptance,  , of YB-71 vs. thickness, t . : From Harada &
s c
Wilkes (1979) [58]. : From measurements on 16 panels by AESC.
Scatter is due to t variation. From Ahern & Karperos (1983) [4]. . 60
c
Figure 5-12: Solar absorptance,  , of Zinc Orthotitanate-Potassium Silicate coating vs.
s
incidence angle, . SSR pigment, phosphated. From Keyte (1975) [70]. . 63
Figure 5-13: Solar absorptance,  , of several YB-71 coatings vs. exposure time, t, as
s
deduced from data of various spacecraft in geosynchronous orbits.
Numbers corresponds to sample designations. . 74
Figure 5-14: Normal-hemispherical spectral reflectance, ' , of Zinc Orthotinanate-

Potassium Silicate coatings vs. wavelength, . . 76
Figure 5-15: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of Zinc Orthotitanate- Potassium Silicate coatings vs.

wavelength, . . 78
Figure 5-16: Effect of Protons Radiation on normal-hemispherical spectral reflectance,
' , of Zinc Orthotitanate-Potassium Silicate coatings vs. wavelength, .

From Gilligan & Zerlaut (1971) [46]. . 79
Figure 5-17: Hemispherical total emittance, , of S-13 G coating vs. temperature, T. 2 x
-4
10 m thick coating on molybdenum substrate. From Spisz & Jack (1971)
[119]. . 85
Figure 5-18: Hemispherical total emittance, , of S-13 and S-13 G coatings vs.
exposure time, t, at 1-Sun level and 395 K. From Cunnington, Grammer &
Smith (1969) [33]. Equal symbols correspond to the same sample. :>
Sample 27; :> Sample 43; :> Sample 28; :> Sample 44. . 87
Figure 5-19: Variation of solar absorptance,  , of S-13 coating with coating thickness, t
s
. :> Nominal composition. Sprayed on primed surface. Air dryed. T =
c
298 K. (Designation in the ref.: 119 to 127). :> ZnO in silicone binder. T =
298 K. (Designation in the ref.: 29, 30). From Touloukian, DeWitt & Hernicz
(1972) [126]. . 89
Figure 5-20: Solar absorptance,  , of S-13 G coating vs. incidence angle, . From
s
Keyte (1975) [70]. . 90
Figure 5-21: Change in solar absorptance,  , of S-13 and S-13 G coatings due to
s
Protons and Alpha Particles Radiation vs. integrated flux, n. . 94
Figure 5-22: Change in solar absorptance,  , of S-13 G coating due to Electrons
s
Radiation vs. integrated flux, n. Data taken in situ. Compiled by Bourrieau,
Paillous & Romer (1976) [21]. . 96
Figure 5-23: Changes in solar absorptance of S-13 and S-13 G coatings. OSO III
experiment. From Millard (1969) [84]. . 98
4

---------------------- Page: 6 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-24: Change in solar absorptance,  , of S-13 coatings vs. flight time in ESH
s
as measured in orbital flight. Prepared by the compiler after Touloukian,
DeWitt & Hernicz (1972) [126]. . 99
Figure 5-25: Change in solar absorptance,  , of S-13 G coating vs. flight time in ESH
s
as measured in orbital flight. Prepared by the compiler after Touloukian,
DeWitt & Hernicz (1972) [126]. . 100
Figure 5-26: Position on the sample holder of the samples 1 and 2, for irradiation and
measurement. From Paillous (1976) [96]. . 104
Figure 5-27: Solar absorptance,  , of S-13 G/LO coating vs. flight time, . 105
s
Figure 5-28: Variation of absorptance to emittance ratio, /, of S-13 coating vs. flight
time. Prepared by the compiler after Touloukian, DeWitt & Hernicz (1972)
and Triolo (1973) [126] . 106
Figure 5-29: Variation of absorptance to emittance ratio, /, of S-13 G coating vs. flight
time. Prepared by the compiler after Touloukian, DeWitt & Hernicz (1972)
[126]. . 107
Figure 5-30: Normal-hemispherical spectral reflectance, ' , of S-13 coating vs.

wavelength, l, for five different values of P-VC. G.E. LTV-602 binder. From
Touloukian, DeWitt & Hernicz (1972) [126]. . 108
Figure 5-31: Effect of Ultra-violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 coating vs. wavelength, . LTV-602 silicone binder.

Two different pigment-binder ratios (PBR). From Touloukian, DeWitt &
Hernicz (1972) [126]. . 109
Figure 5-32: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 coating vs. wavelength, . Several binders and

PBRs. From Touloukian, DeWitt & Hernicz (1972) [126]. . 110
Figure 5-33: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 coating vs. wavelength, . From Touloukian, DeWitt

& Hernicz (1972) [126]. . 111
Figure 5-34: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 coating vs. wavelength, . From Zerlaut, Rogers &

Noble (1969) [144]. Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 112
Figure 5-35: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 G coating vs. wavelength, . Two different pigment

treatment processes. From Zerlaut, Rogers & Noble (1969) [144]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 113
Figure 5-36: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 G coating vs. wavelength, . Sweated pigment.

Two different solvent systems. From Zerlaut, Rogers & Noble (1969) [144].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 114
Figure 5-37: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ', of S-13 G coating vs. wavelength, . Two different pigment
treatment processes. Owens-Illinois 650 binder. From Zerlaut, Rogers &
Noble (1969) [144]. Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 115
Figure 5-38: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 G coating vs. wavelength, . Pigment was sifted

prior to wet grinding. Paint grind time 3 h. From Zerlaut, Rogers & Noble
(1969) [144]. Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 116
5

---------------------- Page: 7 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-39: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 G coating vs. wavelength, . Silicated pigment with

five mechanical perturbations. From Zerlaut, Rogers & Noble (1969) [144].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 117
Figure 5-40: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of S-13 G coating vs. wavelength, . Plasma annealed and

potassium silicate treated pigment. From Gilligan & Zerlaut (1971) [46]. . 118
Figure 5-41: Protons exposure effects on normal-hemispherical spectral reflectance,
' , of S-13 coating vs. wavelength, . LTV-602 silicone binder. From

Gillette, Brown, Seiler & Sheldon (1966) [54]. Drawn from Touloukian,
DeWitt & Hernicz (1972) [126]. . 120
Figure 5-42: Protons exposure effects on normal-hemispherical spectral reflectance,
' , of S-13 G coating vs. wavelength, . Plasma annealed and potassium

silicate treated pigment. From Gilligan & Zerlaut (1971) [46]. . 121
Figure 5-43: Electrons exposure effects on normal-hemispherical spectral reflectance,
' , of S-13 G coating vs. wavelength, . Radiation intensity 20 keV.

Recovery after exposure. From Fogdall, Cannaday & Brown (1970) [43].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 122
Figure 5-44: Electrons exposure effects on normal-hemispherical spectral reflectance,
' , of S-13 G coating vs. wavelength, . Radiation intensity 80 keV.

Recovery after exposure. From Fogdall, Cannaday & Brown (1970) [43].
Drawn from Touloukian, DeWitt & Hernicz (1972) [126]. . 124
Figure 5-45: Electrons exposure effects on normal-hemispherical spectral reflectance,
', of GSFC, 101-7 coating vs. wavelength, . Radiation intensity 20 keV.
Different integrated fluxes. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 125
Figure 5-46: Electrons exposure effects on normal-hemispherical spectral reflectance,
' , of GSFC, 101-7 coating vs. wavelength, . Radiation intensity 80 keV.

Different integrated fluxes. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday & Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 126
Figure 5-47: Electrons exposure effects on normal-hemispherical spectral reflectance,
' , of GSFC, 101-7 coating vs. wavelength, . Radiation intensity 20 keV.

Recovery after exposure. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday & Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 127
Figure 5-48: Electrons exposure effects on normal-hemispherical spectral reflectance,
' , of GSFC, 101-7 coating vs. wavelength, . Radiation intensity 80 keV.

Recovery after exposure. 101-7 is a coating, similar to S-13 G, developed
by NASA Goddard. From Fogdall, Cannaday Brown (1970) [43]. Drawn
from Touloukian, DeWitt & Hernicz (1972) [126]. . 128
Figure 5-49: Effect of Combined Exposure on normal-hemispherical spectral
reflectance, ' , of S-13 G coating vs. wavelength, . Plasma annealed and

potassium silicate treated pigment. From Gilligan & Zerlaut (1971) [46]. . 130
Figure 5-50: Effect of Combined Exposure, simulating up to three years in
geosynchronous orbit, on normal- hemispherical spectral reflectance, ', of
S-13 G/LO coating vs. wavelength, . From Paillous (1976) [96]. . 131
6

---------------------- Page: 8 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-51: Effect of O bleaching, after Combined Exposure, on normal-hemispherical
2
spectral reflectance, ' , of S-13 G/LO coating vs. wavelength, . Curves of

and are those shown in Figure 5-19. From Paillous (1976)
[96]. . 132
Figure 5-52: Effect of Combined Exposure, simulating up to three years in
geosynchronous orbit, on normal- hemispherical spectral reflectance, ' , of

S-13 G/LO coating vs. wavelength, . Curves of and are
those shown in Figure 5-50. From Paillous (1976) [96]. . 133
Figure 5-53: Change in normal-hemispherical spectral absorptance, ' , of PSG 120

coating, due to Ultra-Violet Radiation, vs. exposure time, t. Wavelength,  =
6
0,46x10 m. From Simon (1974) [118]. . 140
Figure 5-54: Change in normal-hemispherical spectral absorptance, ' , of PSG 120

coating, due to Ultra-Violet Radiation, vs. exposure time, t. Wavelength,  =
6
2,5x10 m. Shaded zone in a is enlarged in b. See Explanation in the
caption of Figure 5-53. From Simon (1974) [118]. . 141
Figure 5-55: Change in solar absorptance,  , of PSG 120 coating, due to UV
s
radiation, vs. exposure time, t. Shaded zone in a is enlarged in b. From
Simon (1974) [118]. . 142
Figure 5-56: Estimated change in solar absorptance, s, of PSG 120 vs. time, t. From
Paillous (1976) [96]. : From Guillaumon & Guillin (1981) [52]. . 148
Figure 5-57: Bidirectional total radiation intensity of reflected flux, i'', vs. cone angle, ',
for several values of the cone angle of the incident flux, . PSG 120
coating. Incident and reflected fluxes are coplanar. i'' is measured by the
response of a photocell attached to a photogoniometer. From ASTRAL
(1976)a [6]. . 148
Figure 5-58: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of PSG 120 coating vs. wavelength, . Thick line: Before

5
irradiation. p<1,3x10 Pa. T = 348 K. Thin line: After irradiation.
5
p<1,3x10 Pa. T = 348 K. A Sun level. t = 212 ESH. From Simon (1973)
[117]. . 149
Figure 5-59: Effect of Protons radiation on normal-hemispherical spectral reflectance,
' , of PSG 120 coating vs. wavelength, . Radiation intensity  45 keV.

See Explanation in the caption of Figure 5-61. From Paillous, Amat, Marco
& Panabiere (1977) [97]. . 150
Figure 5-60: Effect of Protons radiation on normal-hemispherical spectral reflectance,
' , of PSG 120 coating vs. wavelength, . Radiation intensity  75 keV.

See Explanation in the caption of Figure 5-61. From Paillous, Amat, Marco
& Panabiere (1977) [97]. . 151
Figure 5-61: Effect of Protons radiation on normal-hemispherical spectral reflectance,
' , of PSG 120 coating vs. wavelength, . Radiation intensity  150 keV.

From Paillous, Amat, Marco & Panabiere (1977) [97]. . 151
Figure 5-62: Effect of Electrons Radiation on normal-hemispherical spectral
reflectance, ' , of PSG 120 coating vs. wavelength, . Radiation intensity 

40 keV. See Explanation in the caption of Figure 5-63. From Paillous,
Amat, Marco & Panabiere (1977) [97]. . 153
Figure 5-63: Effect of Electrons Radiation on normal-hemispherical spectral
reflectance, ' , of PSG 120 coating vs. wavelength, . Radiation intensity 

80 keV. From Paillous, Amat, Marco & Panabiere (1977) [97]. . 153
7

---------------------- Page: 9 ----------------------
kSIST-TP FprCEN/CLC/TR 17603-31-06:2021
FprCEN/CLC/TR 17603-31-06:2021 (E)
Figure 5-64: Effect of Electrons Radiation on normal-hemispherical spectral
reflectance, ' , of PSG 120 coating vs. wavelength, . Radiation intensity 

210 keV. From Paillous, Amat, Marco & Panabiere (1977) [97]. . 154
Figure 5-65: Change in normal-hemispherical spectral reflectance, ' , of PSG 120

coating, due to particulate irradiation, vs. penetration range, X .
d
6
Wavelength,  = 2,05x10 m. From Bourrieau (1978) [19]. . 157
Figure 5-66: Effect of Combined Exposure, simulating up to three years in
geosyncronous orbit, on normal-hemispherical spectral reflectance, ', of
PSG 120 coating vs. wavelength, . From Paillous (1976) [96]. . 157
Figure 5-67: Effect of O bleaching, after Combined Exposure, on normal-
2
hemispherical spectral reflectance, ' , of PSG 120 coating vs. wavelength,

. Curves and are those shown in Figure 5-66. From
Paillous (1976) [96]. . 158
Figure 5-68: Change in normal-hemispherical spectral absorptance, ' , of PSZ 184

coating, due to UV Radiation, vs. exposure time, t. Wavelength,  =
6
0,46x10 m. See Explanation in the caption of Figure 5-69. From Simon
(1974) [118]. . 166
Figure 5-69: Change in normal-hemispherical spectral absorptance, ' , of PSZ 184

coating, due to UV Radiation, vs. exposure time, t. Wavelength,  =
6
2,5x10 m. From Simon (1974) [118]. 167
Figure 5-70: Change in solar absorptance,  , of PSZ 184 coating, due to UV
s
Radiation, vs. exposure time, t. Shaded zone in a is enlarged in b. From
Simon (1974) [118]. . 168
Figure 5-71: Estimated change in solar absorptance,  , of PSZ 184 vs. time, t. From
s
Paillous (1976) [96]. . 173
Figure 5-72: Effect of Ultra-Violet Radiation on normal-hemispherical spectral
reflectance, ' , of PSZ 184 coating vs. wavelength, . Thick line: Before

5 5
irradiation. p<1,3x10 Pa. Thin line: After irradiation. p<1,3x10 Pa. 1 Sun
level. Neither sample temperature nor exposure time are given. From
Simon (1974) [118]. . 174
Figure 5-73: Effect of Protons Radiation on normal-hemispherical spectral reflectance,
' , of PSZ 184 coating vs. wavelength, . a Coating on P 131 primer. b

Coating on silicated primer. Radiation intensity  45 keV. See Explanation
in the caption of Figure 5-74. From Paillous, Amat, Marco & Panabiere
(1977) [97]. .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.