Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer

This European Standard specifies the characteristics of semi-rigid multilayer modular floor covering with a wear-resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are considered suitable for domestic and commercial levels of use and designed for floating installation.
This European Standard does not apply to resilient floor panels for loose-laying according to EN 14085, to multilayer wood floorings according to EN 13489, nor to products specified in EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This European Standard applies to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms or saunas, only if recommended by the producer.
This European Standard also includes requirements for marking and packaging.

Paneele für schwimmende Verlegung - Halbstarre, mehrlagige, modulare Fußbodenbeläge (MMF) mit abriebbeständiger Decklage

Panneaux pour pose flottante - Panneaux de revêtement de sol semi-rigides, multicouches et modulaires (MMF) avec couche supérieure résistante à l'usure

Prosto položene plošče - Večslojne poltoge talne obloge plošč z zgornjim delom, odpornim proti obrabi

General Information

Status
Not Published
Public Enquiry End Date
01-Nov-2018
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
06-May-2019
Due Date
11-May-2019
Completion Date
06-May-2019

RELATIONS

Buy Standard

Amendment
SIST EN 16511:2014/oprA1:2018
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 16511:2014/oprA1:2018
01-oktober-2018
3URVWRSRORåHQHSORãþH9HþVORMQHSROWRJHWDOQHREORJHSORãþ]]JRUQMLPGHORP
RGSRUQLPSURWLREUDEL

Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear

resistant top layer
Paneele für schwimmende Verlegung - Halbstarre, mehrlagige, modulare
Fußbodenbeläge (MMF) mit abriebbeständiger Decklage
Panneaux pour pose flottante - Panneaux de revêtement de sol semi-rigides,
multicouches et modulaires (MMF) avec couche supérieure résistante à l'usure
Ta slovenski standard je istoveten z: EN 16511:2014/prA1
ICS:
97.150 Talne obloge Floor coverings
SIST EN 16511:2014/oprA1:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16511:2014/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN 16511:2014/oprA1:2018
DRAFT
EUROPEAN STANDARD
EN 16511:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2018
ICS 97.150
English Version
Loose-laid panels - Semi-rigid multilayer modular floor
covering (MMF) panels with wear resistant top layer

Panneaux pour pose flottante - Panneaux de Paneele für schwimmende Verlegung - Halbstarre,

revêtement de sol semi-rigides, multicouches et mehrlagige, modulare Fußbodenbeläge (MMF) mit

modulaires (MMF) avec couche supérieure résistante à abriebbeständiger Decklage
l'usure

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A1, if approved, will modify the European Standard EN 16511:2014. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.