SIST EN 825:2013
(Main)Thermal insulating products for building applications - Determination of flatness
Thermal insulating products for building applications - Determination of flatness
This European Standard specifies the equipment and procedures for determining the deviation from flatness for full-size products. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Prüfung der Abweichung von der Ebenheit an Produkten in Liefermaßen fest. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la planéité
La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer l'écart de planéité des produits en vraies dimensions. Elle s’applique aux produits isolants thermiques.
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti
Ta evropski standard določa opremo in postopke za ugotavljanje odklona od ravnosti za izdelke naravne velikosti. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 825:2013
01-julij-2013
1DGRPHãþD
SIST EN 825:1997
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskosti
Thermal insulating products for building applications - Determination of flatness
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
planéité
Ta slovenski standard je istoveten z: EN 825:2013
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 825:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 825:2013
---------------------- Page: 2 ----------------------
SIST EN 825:2013
EUROPEAN STANDARD
EN 825
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 91.100.60 Supersedes EN 825:1994
English Version
Thermal insulating products for building applications -
Determination of flatness
Produits isolants thermiques destinés aux applications du Wärmedämmstoffe für das Bauwesen - Bestimmung der
bâtiment - Détermination de la planéité Ebenheit
This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 825:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 825:2013
EN 825:2013 (E)
Contents Page
Foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle. 5
5 Apparatus . 5
6 Test specimens . 5
7 Procedure . 6
8 Calculation and expression of results . 7
9 Accuracy of measurement . 7
10 Test report . 7
2
---------------------- Page: 4 ----------------------
SIST EN 825:2013
EN 825:2013 (E)
Foreword
This document (EN 825:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating
materials and products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 825:1994.
The revision of this standard contains no major changes, only minor corrections and clarifications of an
editorial nature.
This European standard has been drafted for applications in building but it may also be used in other areas
where it is relevant.
This European test standard is one of the following group of interrelated standards on test methods for
determining dimensions and properties of thermal insulation materials and products, all of which fall within the
scope of CEN/TC 88:
EN 822, Thermal insulating products for building applications — Determination of length and width
EN 823, Thermal insulating products for building applications — Determination of thickness
EN 824, Thermal insulating products for building applications — Determination of squareness
EN 825, Thermal insulating products for building applications — Determination of flatness
EN 826, Thermal insulating products for building applications — Determination of compression behaviour
EN 1602, Thermal insulating products for building applications — Determination of the apparent density
EN 1603, Thermal insulating products for building applications — Determination of dimensional stability
under constant normal laboratory conditions (23 °C/50 % relative humidity)
EN 1604, Thermal insulating products for building applications — Determination of dimensional stability
under specified temperature and humidity conditions
EN 1605, Thermal insulating products for building applications — Determination of deformation under
specified compressive load and temperature conditions
EN 1606, Thermal insulating products for building applications — Determination of compressive creep
EN 1607, Thermal insulating products for building applications — Determination of tensile strength
perpendicular to faces
EN 1608, Thermal insulating products for building applications — Determination o
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje ploskostiWärmedämmstoffe für das Bauwesen - Bestimmung der EbenheitProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la planéitéThermal insulating products for building applications - Determination of flatness91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 825kSIST FprEN 825:2012en,fr,de01-september-2012kSIST FprEN 825:2012SLOVENSKI
STANDARD
kSIST FprEN 825:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 825
June 2012 ICS 91.100.60 Will supersede EN 825:1994English Version
Thermal insulating products for building applications - Determination of flatness
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la planéité
Wärmedämmstoffe für das Bauwesen - Bestimmung der Ebenheit This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 825:2012: EkSIST FprEN 825:2012
FprEN 825:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus .56Test specimens .57Procedure .68Calculation and expression of results .79Accuracy of measurement .710Test report .7 kSIST FprEN 825:2012
FprEN 825:2012 (E) 3 Foreword This document (FprEN 825:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 825:1994.
The revision of this standard contains no major changes only minor corrections and clarifications of editorial nature. This European standard has been drafted for applications in building but it may also be used in other areas where it is relevant. This EN test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimension and shape stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Deter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.