Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: Lists of properties (LOP) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2012)

This part of IEC 61987 provides - a characterisation of industrial process measuring equipment (device type dictionary) for integration in the Component Data Dictionary (CDD), and - generic structures for Operating Lists of Properties (OLOPs) and Device Lists of Properties (DLOPs) of measuring equipment in conformance with IEC 61987-10. The generic structures for the OLOPs and DLOPs contain the most important blocks for process measuring equipment. Blocks pertaining to a specific equipment type will be described in the corresponding part of the IEC 61987 series (for example IEC 61987-12, flow transmitters). Similarly, equipment properties are not dealt with in this part of the series For instance, the OLOPs and DLOPs for flow transmitters with blocks and properties will be found in future in IEC 61987-12.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 11: Merkmalleisten für Messgeräte für elektronischen Datenaustausch – Allgemeine Strukturen (IEC 61987-11:2012)

Mesure et contrôle des processus industriels - Structures de données et éléments dans les catalogues d'équipement de processus - Partie 11: Liste de propriétés (LOP) des équipements de mesure pour l'échange électronique de données - Structures génériques (CEI 61987-11:2012)

L'IEC 61987-11:2012 fournit une caractérisation des équipements de mesure de processus industriels (dictionnaire des types de dispositifs) pour l'intégration dans le dictionnaire de données de composants (CDD, en anglais "Component Data Dictionary") et des structures génériques pour les listes de propriétés fonctionnelles (OLOP, en anglais "Operating List of Properties") et les listes de propriétés des dispositifs de mesure (DLOP, en anglais "Device List of Properties") en conformité avec la CEI 61987-10. La présente version bilingue (2014-01) correspond à la version anglaise monolingue publiée en 2012-07.

Meritve in krmiljenje industrijskih procesov - Strukture podatkov in elementi v katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za elektronsko izmenjavo podatkov - Rodovne strukture (IEC 61987-11:2012)

Ta del standarda IEC 61987 zagotavlja – karakterizacijo merilne opreme za industrijske procese (slovar tipov naprav) za integracijo v slovar podatkov o komponentah (CDD) in – rodovne strukture operativnih seznamov lastnosti (OLOP) in seznamov lastnosti naprav (DLOP) za merilno opremo v skladu z IEC 61987-10. Rodovne strukture za OLOP in DLOP vsebujejo najpomembnejše bloke za procesno merilno opremo. Bloki, ki se nanašajo na določeno vrsto opreme, bodo opisani v ustreznem delu serije IEC 61987 (na primer IEC 61987-12, merilniki pretoka). Lastnosti opreme, ki niso obravnavane v tem delu serije, na primer OLOP in DLOP za merilnike pretoka, skupaj z bloki in lastnostmi, bo mogoče najti v prihodnjih delih IEC 61987-12.

General Information

Status
Withdrawn
Publication Date
10-Oct-2012
Withdrawal Date
07-Jan-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Jan-2020
Due Date
30-Jan-2020
Completion Date
08-Jan-2020

Relations

Buy Standard

Standard
EN 61987-11:2012
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61987-11:2012
01-november-2012
Meritve in krmiljenje industrijskih procesov - Strukture podatkov in elementi v
katalogih procesne opreme - 11. del: Seznam lastnosti merilne opreme za
elektronsko izmenjavo podatkov - Rodovne strukture (IEC 61987-11:2012)
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 11: Lists of properties (LOP) of measuring equipment for
electronic data exchange - Generic structures (IEC 61987-11:2012)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 11: Merkmalleisten für Messgeräte für elektronischen
Datenaustausch – Allgemeine Strukturen (IEC 61987-11:2012)
Mesure et contrôle des processus industriels - Structures de données et éléments dans
les catalogues d'équipement de processus - Partie 11: Liste de propriétés (LOP) des
équipements de mesure pour l'échange électronique de données - Structures
génériques (CEI 61987-11:2012)
Ta slovenski standard je istoveten z: EN 61987-11:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61987-11:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61987-11:2012

---------------------- Page: 2 ----------------------

SIST EN 61987-11:2012

EUROPEAN STANDARD
EN 61987-11

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.20


English version


Industrial-process measurement and control -
Data structures and elements in process equipment catalogues -
Part 11: List of Properties (LOP) of measuring equipment for electronic
data exchange - Generic structures
(IEC 61987-11:2012)


Mesure et contrôle des processus  Industrielle Leittechnik -
industriels - Datenstrukturen und -elemente in
Structures de données et éléments dans les Katalogen der Prozessleittechnik -
catalogues d'équipement de processus - Teil 11: Merkmalleisten (ML) für
Partie 11: Liste de propriétés (LOP) Messgeräte für den elektronischen
des équipements de mesure pour l'échange Datenaustausch - Allgemeine Strukturen
électronique de données - (IEC 61987-11:2012)
Structures génériques
(CEI 61987-11:2012)



This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61987-11:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61987-11:2012
EN 61987-11:2012 - 2 -
Foreword
The text of document 65E/245/FDIS, future edition 1 of IEC 61987-11, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61987-11:2012.

The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61987-11:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60770-1:2010 NOTE Harmonised as EN 60770-1:2011 (not modified).
IEC 61346-1:1996 NOTE Harmonised as EN 61346-1:1996 (not modified).
IEC 61360-1:2009 NOTE Harmonised as EN 61360-1:2010 (not modified).
IEC 61360-2 NOTE Harmonised as EN 61360-2.
IEC 61360-5 NOTE Harmonised as EN 61360-5.

---------------------- Page: 4 ----------------------

SIST EN 61987-11:2012
- 3 - EN 61987-11:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61069-5 - Industrial-process measurement EN 61069-5 -
and control - Evaluation of system
properties for the purpose
of system assessment -
Part 5: Assessment of system dependability


IEC 61508-6 - Functional safety of EN 61508-6 -
electrical/electronic/programmable
electronic safety-related systems -
Part 6: Guidelines on the application
of IEC 61508-2 and IEC 61508-3


IEC 61987 Series Industrial-process measurement EN 61987 Series
and control - Data structures and elements
in process equipment catalogues


IEC 61987-1 2006 Industrial-process measurement EN 61987-1 2007
and control - Data structures
and elements in process equipment
catalogues -
Part 1: Measuring equipment
with analogue and digital output


IEC 61987-10 2009 Industrial-process measurement EN 61987-10 2009
+ corr. May 2012 and control - Data structures + AC:2011 2011
and elements in process equipment
catalogues -
Part 10: Lists of properties (LOPs) for
industrial-process measurement and control
for electronic data exchange - Fundamentals


IEC 62424 - Representation of process control EN 62424 -
engineering - Requests in P&I diagrams
and data exchange between P&ID tools and
PCE-CAE tools

---------------------- Page: 5 ----------------------

SIST EN 61987-11:2012

---------------------- Page: 6 ----------------------

SIST EN 61987-11:2012



IEC 61987-11

®


Edition 1.0 2012-07




INTERNATIONAL



STANDARD



















Industrial-process measurement and control – Data structures and elements

in process equipment catalogues –

Part 11: List of Properties (LOP) of measuring equipment for electronic data


exchange – Generic structures
























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION

PRICE CODE
XA


ICS 25.040.40; 35.100.20 ISBN 978-2-83220-283-8



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61987-11:2012
– 2 – 61987-11 © IEC:2012(E)
CONTENTS

FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
3.1 Terms and definitions concerning measuring instruments . 10
3.2 Terms and definitions concerning relationships . 11
4 General . 13
4.1 Characterization scheme . 13
4.2 Aspects . 13
4.3 Rules for the construction of LOPs with block structure . 15
4.3.1 Block order . 15
4.3.2 Position of cardinality properties . 15
4.3.3 Naming of blocks created by cardinality . 15
4.3.4 Characterizing property . 15
4.3.5 Validity . 15
4.4 OLOP and DLOP . 15
4.5 Operating conditions . 16
4.6 Measuring equipment configuration . 17
5 Operating List of Properties (OLOP) . 18
5.1 Generic block structure . 18
5.2 Base conditions . 18
5.3 Process case . 19
5.3.1 General . 19
5.3.2 Process case variables . 19
5.3.3 Other process case variable . 20
5.4 Operating conditions for device design . 20
5.4.1 General . 20
5.4.2 Installation design conditions . 20
5.4.3 Environmental design conditions . 20
5.4.4 Process design conditions . 21
5.4.5 Pressure-temperature design conditions . 21
5.5 Process equipment . 22
5.5.1 General . 22
5.5.2 Line or equipment nozzle . 22
5.6 Physical location . 22
5.6.1 General . 22
5.6.2 Available power supply . 22
5.6.3 Process criticality classification . 23
5.6.4 Area classification . 23
6 Device list of properties (DLOP) . 23
6.1 General . 23
6.1.1 Generic block structure . 23
6.1.2 Relationship to IEC 61987-1 . 25

---------------------- Page: 8 ----------------------

SIST EN 61987-11:2012
61987-11 © IEC:2012(E) – 3 –
6.1.3 Multivariable devices . 25
6.2 Identification . 25
6.3 Application . 26
6.4 Function and system design . 26
6.4.1 General . 26
6.4.2 Dependability . 26
6.5 Input . 26
6.5.1 General . 26
6.5.2 Measured variable . 26
6.5.3 Auxiliary input . 27
6.6 Output . 28
6.6.1 General . 28
6.6.2 output . 28
6.7 Digital communication . 29
6.7.1 General . 29
6.7.2 Digital communication interface . 29
6.8 Performance . 30
6.8.1 General . 30
6.8.2 Reference conditions for the device . 30
6.8.3 Performance variable. 30
6.9 Rated operating conditions . 32
6.9.1 General . 32
6.9.2 Installation conditions . 32
6.9.3 Environmental design ratings . 32
6.9.4 Process design ratings . 33
6.9.5 Pressure-temperature design ratings . 34
6.10 Mechanical and electrical construction . 34
6.10.1 General . 34
6.10.2 Overall dimensions and weight . 34
6.10.3 Structural design . 34
6.10.4 Explosion protection design approval . 34
6.10.5 Codes and standards approval . 34
6.11 Operability . 35
6.11.1 General . 35
6.11.2 Basic configuration . 35
6.11.3 Parametrization . 35
6.11.4 Adjustment . 35
6.11.5 Operation . 35
6.11.6 Diagnosis . 35
6.12 Power supply . 35
6.13 Certificates and approvals . 35
6.14 Component part identifications . 35
7 Composite devices . 36
7.1 Structure of composite devices . 36
7.2 Aspects of components . 37
8 Additional aspects . 38
8.1 Administrative information . 38
8.2 Calibration and test . 38
8.3 Accessories . 38

---------------------- Page: 9 ----------------------

SIST EN 61987-11:2012
– 4 – 61987-11 © IEC:2012(E)
8.4 Device documents supplied . 38
8.5 Packaging and shipping. 39
8.6 Digital communication parametrization . 39
8.7 Example of a composite device with aspects . 39
Annex A (normative) Device type dictionary – Classification of process measuring
equipment according to measuring characteristics . 40
Bibliography . 53

Figure 1 – Characterisation of measuring equipment . 13
Figure 2 – Simplified UML scheme of device, LOPs and aspects . 14
Figure 3 – Assignment of OLOPs and DLOPs for equipment used to measure one type
of measured variable . 16
Figure 4 – Structure of a composite device . 36
Figure 5 – Example for the structure of a LOP for a composite device showing different
aspects related to different sub-components . 39

Table 1 – Structure of the “Operating conditions for device design” block in the OLOP . 17
Table 2 – Structure of the “rated operating conditions” block in the DLOP . 17
Table 3 – Generic block structure of an OLOP . 18
Table 4 – Generic block structure of a DLOP . 24
Table 5 – DLOP structure for composite devices . 37
Table A.1 – Classification scheme for process measuring equipment . 40

---------------------- Page: 10 ----------------------

SIST EN 61987-11:2012
61987-11 © IEC:2012(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
DATA STRUCTURES AND ELEMENTS
IN PROCESS EQUIPMENT CATALOGUES –

Part 11: List of Properties (LOP) of measuring equipment
for electronic data exchange –
Generic structures


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61987-11 has been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65:Industrial-process
measurement, control and automation.
The text of this standard is based on the following documents:
FDIS Report on voting
65E/245/FDIS 65E/270/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 11 ----------------------

SIST EN 61987-11:2012
– 6 – 61987-11 © IEC:2012(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61987 series, published under the general title, Industrial-process
measurement and control – Data structures and elements in process equipment catalogues,
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 12 ----------------------

SIST EN 61987-11:2012
61987-11 © IEC:2012(E) – 7 –
INTRODUCTION
0.1 General
The exchange of product data between companies, business systems, engineering tools, data
systems within companies and, in the future, control systems (electrical, measuring and
control technology) can run smoothly only when both the information to be exchanged and the
use of this information has been clearly defined.
Prior to this standard, requirements on process control devices and systems were specified by
customers in various ways when suppliers or manufacturers were asked to quote for suitable
equipment. The suppliers in their turn described the devices according to their own
documentation schemes, often using different terms, structures and media (paper, databases,
CDs, e-catalogues, etc.). The situation was similar in the planning and development process,
with device information frequently being duplicated in a number of different information
technology (IT) systems.
Any method that is capable of recording all existing information only once during the planning
and ordering process and making it available for further processing, gives all parties involved
an opportunity to concentrate on the essentials. A precondition for this is the standardization
of both the descriptions of the objects and the exchange of information.
This standard series proposes a method for standardization which will help both suppliers and
users of measuring equipment to optimize workflows within their own companies as well as in
their exchanges with other companies. Depending on their role in the process, engineering
firms may be considered here to be either users or suppliers.
The method specifies measuring equipment by means of blocks of properties. These blocks
are compiled into lists of properties (LOPs), each of which describes a specific equipment
(device) type. This standard series covers both properties that may be used in an inquiry or a
proposal and detailed properties required for integration of the equipment in computer
systems for other tasks.
IEC 61987-10 defines structure elements for constructing lists of properties for electrical and
process control equipment in order to facilitate automatic data exchange between any two
computer systems in any possible workflow, for example engineering, maintenance or
purchasing workflow and to allow both the customers and the suppliers of the equipment to
optimize their processes and workflows. Part 10 also provides the data model for assembling
the LOPs.
This part of the IEC 61987 series specifies the generic structure for operating and device lists
of properties (OLOPs and DLOPs). It lays down the framework for further parts of IEC 61987
in which complete LOPs for device types measuring a given physical variable and using a
particular measuring principle will be specified. The generic structure may also serve as a
basis for the specification of LOPs for other industrial-process control instrument types such
as control valves and sign
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.