iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 8434-1:2007/AC:2009

(Corrigendum)

Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)

Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)

20090121 - EN ISO 8434-1:2007 should have revised EN ISO 8434-4:2000 as well as the EN ISO 8434-1:1997.  This corrigendum is to rectify the matter.

Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Teil 1: Verschraubungen mit 24°-Konus (ISO 8434-1:2007)

Raccordements de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales - Partie 1: Raccords coniques à 24 degrés (ISO 8434-1:2007)

Kovinski cevni priključki za fluidno tehniko in za splošno uporabo - 1. del: Stožčasti priključki z naklonom 24° (ISO 8434-1:2007) - Popravek AC

General Information

Status
Withdrawn
Publication Date
19-May-2009
Withdrawal Date
10-Sep-2018
ICS
23.100.40 - Piping and couplings
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-Sep-2018
Due Date
03-Oct-2018
Completion Date
11-Sep-2018
Ref Project
EN ISO 8434-1:2007/AC:2009 - Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)

Relations

Corrects
SIST EN ISO 8434-1:2007 - Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
Effective Date
01-Jul-2009
Replaced By
SIST EN ISO 8434-1:2018 - Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018, Corrected version 2018-10)
Effective Date
05-Sep-2018
Corrects
SIST EN ISO 8434-1:2007 - Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 8434-1:2007/AC:2009EN ISO 8434-1:2007/AC:2009
PreviousNext
Corrigendum
EN ISO 8434-1:2007/AC:2009
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Teil 1: Verschraubungen mit 24°-Konus (ISO 8434-1:2007)Raccordements de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales - Partie 1: Raccords coniques à 24 degrés (ISO 8434-1:2007)Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)23.100.40Cevna napeljava in sklopkePiping and couplingsICS:Ta slovenski standard je istoveten z:EN ISO 8434-1:2007/AC:2009SIST EN ISO 8434-1:2007/AC:2009en,fr,de01-julij-2009SIST EN ISO 8434-1:2007/AC:2009SLOVENSKI
STANDARD



SIST EN ISO 8434-1:2007/AC:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 8434-1:2007/AC
April 2009
Avril 2009
April 2009 ICS 23.100.40 English version Version Française Deutsche Fassung
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007)
Raccordements de tubes métalliques pour transmissions hydrauliques et pneumatiques et applications générales - Partie 1: Raccords coniques à 24 degrés (ISO 8434-1:2007)
Metallische Rohrverschraubungen für
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 1179-2:2023(Main)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
EN ISO 1179-2:2022

This document specifies the dimensions, performance requirements and test procedures for heavyduty (S series) and light-duty (L series) stud ends with threads, and the elastomeric sealing (type E)
that is used with them as defined in ISO 228-1.
Heavy-duty (S series) stud ends with type E sealing in accordance with this document can be used
at working pressures up to 63 MPa (630 bar). Light-duty (L series) stud ends with type E sealing
in accordance with this document can be used at working pressures up to 25 MPa (250 bar). The
permissible working pressure depends upon size, materials, design, working conditions, application,
etc.
This document is applicable to connectors detailed in ISO 8434-1, ISO 8434-2 and ISO 8434-6.
NOTE The Introduction gives recommendations for ports and stud ends to be used for new designs in
hydraulic and pneumatic fluid power applications

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6149-1:2022(Main)
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
EN ISO 6149-1:2022

This document specifies dimensions for metric ports for use with the adjustable and non-adjustable stud ends as described in ISO 6149‑2 and ISO 6149‑3.
Ports in accordance with this document can be used at working pressures up to 63 MPa [630 bar[1]] for non-adjustable stud ends and 40 MPa (400 bar) for adjustable stud ends. The permissible working pressure depends upon port size, materials, design, working conditions, application, etc. See ISO 6149‑2 and ISO 6149‑3 for pressure ratings.
NOTE The Introduction of this document gives recommendations for ports and stud ends to be used for new designs in hydraulic fluid power applications.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19879:2021(Main)
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
EN ISO 19879:2021

This document specifies uniform methods for the testing and performance evaluation of metallic tube
connections, stud ends for ports and flange connections for use in hydraulic fluid power applications.
This document does not apply to the testing of hydraulic quick-action couplings, which is covered by
ISO 18869.
Tests outlined in this document are independent of each other and document the method to follow
for each test. See the appropriate component International Standard for indications of which tests to
conduct and for performance criteria.
For qualification of the connector, the minimum number of samples specified in this document is tested,
unless otherwise specified in the relevant connector standard or as agreed upon by the manufacturer
and the user.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8434-1:2018(Main)
Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018, Corrected version 2018-10)
EN ISO 8434-1:2018

This document specifies the general and dimensional requirements for 24° cone connectors using
cutting ring and O‑ring seal cone (referred to as DKO) suitable for use with ferrous and non‑ferrous
tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power
and general applications within the limits of pressure and temperature specified in this document.
They are intended for the connection of plain end tubes and hose fittings to ports in accordance with
ISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for a related hose fitting specification.)
These connectors provide full-flow connections in hydraulic systems operating to the working
pressures shown in Table 1. Because many factors influence the pressure at which a system performs
satisfactorily, these values are not intended to be understood as guaranteed minimums. For every
application, sufficient testing is meant to be conducted and reviewed by both the user and manufacturer
to ensure that required performance levels are met.
NOTE 1 For new designs in hydraulic fluid power applications, see the requirements given in 9.6. Where
the requirements of the application allow for the use of elastomeric seals, connector designs that conform to
International Standards and incorporate elastomeric sealing are preferred.
NOTE 2 For use under conditions outside the pressure and/or temperature limits specified, see 5.4.
This document also specifies a performance and qualification test for these connectors.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6149-4:2017(Main)
Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
EN ISO 6149-4:2017

This document specifies dimensions and performance requirements for external hex and internal hex
port plugs for use with ISO 6149-1 ports.
Port plugs in accordance with this document can be used at working pressures up to 63 MPa (630 bar1)).
The permissible working pressure depends upon the plug end size, materials, design, working
conditions, application, etc.
Conformance to the dimensional information in this document does not guarantee rated performance.
Each manufacturer is expected to perform testing according to the specification contained in this
document to assure that components comply with the performance ratings.
WARNING — The use of stud ends conforming to this document with ports conforming to the
relevant parts of ISO 1179, ISO 9974 and ISO 11926 could lead to a hazardous situation.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1179-1:2014(Amendment)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
EN ISO 1179-1:2013

This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends described in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends described in ISO 1179-3. Ports in accordance with this part of ISO 1179 are applicable for use with - ISO 1179-2 heavy-duty (S series) stud ends with type E sealing at working pressures up to 63 MPa (630 bar) and light-duty (L series) stud ends at working pressures up to 25 MPa (250 bar), - ISO 1179-3 light-duty (L series) stud ends with type G sealing at working pressures up to 31,5 MPa (315 bar) and ISO 1179-3 light-duty (L series) adjustable stud ends with type H sealing at working pressures up to 20 MPa (200 bar), and - ISO 1179-4 stud ends with type B sealing at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series, except for the G2 size port, which in hydraulic fluid power systems is used mainly with accumulators and for which ISO 1179-3 and ISO 1179-4 do not specify stud ends. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Users of this part of ISO 1179 should ensure that there is sufficient material around the port to maintain the pressure.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1179-4:2008(Main)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-tometal sealing (type B) (ISO 1179-4:2007)
EN ISO 1179-4:2008

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used for leak-free hydraulic fluid power applications. Stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 40 MPa (400 bar) for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series. The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform tests according to the specification contained in this part of ISO 1179 in order to ensure that components made to this part of ISO 1179 comply with the performance ratings.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1179-3:2008(Main)
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
EN ISO 1179-3:2008

This part of ISO 1179 specifies dimensions, performance requirements and test procedures for non-adjustable and adjustable light-duty (L series) stud ends with ISO 228-1 threads with sealing by O-ring with retaining ring (types G and H, respectively). Light-duty (L series) stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 31,5 MPa (315 bar) for non-adjustable stud ends (type G) and up to 20 MPa (200 bar) for adjustable stud ends (type H). The permissible working pressure depends upon size, materials, design, working conditions, application, etc. Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this part of ISO 1179 to assure that components made to this part of ISO 1179 comply with the performance ratings.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6149-3:2007(Main)
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
EN ISO 6149-3:2007

ISO 6149-3:2006 specifies dimensions, performance requirements and test procedures for metric adjustable and non-adjustable light-duty (L series) stud ends and O-rings.
Stud ends in accordance with ISO 6149-3:2006 may be used at working pressures up to 40 MPa (400 bar) for non-adjustable stud ends and 31,5 MPa (315 bar) for adjustable stud ends. The permissible working pressure depends upon the stud end size, materials, design, working conditions, application, etc.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6149-2:2007(Main)
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
EN ISO 6149-2:2007

ISO 6149-2:2006 specifies dimensions, performance requirements and test procedures for metric adjustable and non-adjustable heavy-duty (S series) stud ends and O-rings.
Stud ends in accordance with ISO 6149-2:2006 may be used at working pressures up to 63 MPa (630 bar) for non-adjustable stud ends and 40 MPa (400 bar) for adjustable stud ends. The permissible working pressure depends upon the stud end size, materials, design, working conditions, application, etc.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day