kSIST FprEN ISO 9235:2021
(Main)Aromatic natural raw materials - Vocabulary (ISO/FDIS 9235:2021)
Aromatic natural raw materials - Vocabulary (ISO/FDIS 9235:2021)
Natürliche aromatische Rohstoffe - Vokabular (ISO/FDIS 9235:2021)
Dieses Dokument legt Begriffe zu natürlichen aromatischen Rohstoffen fest.
Matières premières aromatiques naturelles - Vocabulaire (ISO/FDIS 9235:2021)
Naravne aromatične surovine - Slovar (ISO/FDIS 9235:2021)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 9235:2020
01-oktober-2020
Naravne aromatične surovine - Slovar (ISO/DIS 9235:2020)
Aromatic natural raw materials - Vocabulary (ISO/DIS 9235:2020)
Natürliche aromatische Rohstoffe - Vokabular (ISO/DIS 9235:2020)
Matières premières aromatiques naturelles - Vocabulaire (ISO/DIS 9235:2020)
Ta slovenski standard je istoveten z: prEN ISO 9235
ICS:
01.040.71 Kemijska tehnologija Chemical technology
(Slovarji) (Vocabularies)
71.100.60 Eterična olja Essential oils
oSIST prEN ISO 9235:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 9235:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 9235:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9235
ISO/TC 54 Secretariat: UNE
Voting begins on: Voting terminates on:
2020-07-29 2020-10-21
Aromatic natural raw materials — Vocabulary
Matières premières aromatiques naturelles — Vocabulaire
ICS: 71.100.60; 01.040.71
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9235:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 9235:2020
ISO/DIS 9235:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 9235:2020
ISO/DIS 9235:2020(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
Annex A (informative) Thematic index (English and French) .................................................................................................... 6
Annex B (informative) Alphabetical index (English and French) ........................................................................................... 8
© ISO 2020 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 9235:2020
ISO/DIS 9235:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 54, Essential oils.
This third edition cancels and replaces the second edition (ISO 9235:2013), which has been technically
revised.The main changes compared to the previous edition are as follows:
— modification of the definition 3.13 extract;
— addition of a new definition 3.19 native aromatic water.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 9235:2020
ISO/DIS 9235:2020(E)
Introduction
This document falls within the framework of the standardization work conducted within the essential
oils sector. It is aimed at defining the natural raw materials and products which stem from that sector.
It is not intended to integrate all the provisions of other sectors of activity which use the products
defined in this standard (perfumes/fragrances, cosmetics, food industry flavours, etc.).
© ISO 2020 – All rights reserved v---------------------- Page: 7 ----------------------
oSIST prEN ISO 9235:2020
---------------------- Page: 8 ----------------------
oSIST prEN ISO 9235:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 9235:2020(E)
Aromatic natural raw materials — Vocabulary
1 Scope
This document specifies the terms and definitions relating to aromatic natural raw materials.
2 Normative referencesThere are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp— IEC Electropedia: available at http:// www .electropedia .org/
Note 1 to entry In the following definitions, the terms defined elsewhere are in italic type. In each definition,
reference is made to the number where they are defined.Note 2 to entry In this document, terms appear in alphabetical order of English terms; an index sorted by themes
is presented in Annex A; another index sorted by alphabetical order for the English terms is given in Annex B.
3.1absolute
product obtained by extraction with ethanol from a concrete (3.7), a pomade (3.23), a resinoid (3.27) or
a supercritical fluid extract (3.28)Note 1 to entry: The ethanolic solution is generally cooled down and filtered in order to eliminate the “waxes”;
the ethanol is then eliminated by distillation.3.2
alcoholate
distillate (3.8) which results from the distillation of a natural raw material (3.20) in presence of ethanol
at variable concentrations3.3
aromatic water hydrolate
aqueous distillate (3.8) which remains after steam distillation and separation of the essential oil (3.11)
whenever possibleEXAMPLE Lavender hydrolate (water), orange blossom water.
Note 1 to entry: A floral water or a “plant name” water is an aromatic water.
Note 2 to entry: Aromatic water can undergo physical treatments which do not result in any significant changes
in its composition (e.g. filtration, decantation, centrifugation).3.4
balsam
oleoresin (3.18) characterized in particular by the presence of benzoic and/or cinnamic derivatives
EXAMPLE Peru balsam, Tolu balsam, benzoin, styrax.© ISO 2020 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 9235:2020
ISO/DIS 9235:2020(E)
3.5
cold-pressed essential oil
essential oil (3.11) obtained by mechanical processes from the epicarp of the fruit of a citrus, at ambient
temperature3.6
concentrated essential oil
folded oil
essential oil (3.11) treated by a physical process in order to concentrate one or more components
considered to be of interest3.7
concrete
extract (3.13) obtained from a fresh natural raw material (3.20) by extraction with one or several
solventsNote 1 to entry: The solvent or solvents are then totally or partly removed.
3.8
distillate
product of condensation obtained after distillation of a natural raw material (3.20)
3.9dry-distilled essential oil
essential oil (3.11) obtained by distillation of wood, barks, roots or gums, without addition of water
or steamEXAMPLE Birch tar essential oil.
3.10
essential oil of fruit juice
essential oil (3.11) obtained from a fruit juice during its concentration or during UHT (flash
pasteurization) treatmentNote 1 to entry: The water and aromatic oils are separated to yield an arom
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.