SIST EN 60317-22:2005/A1:2010
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 (IEC 60317-22:2004/A1:2009)
- Abstract
Amandma A1:2010 je dodatek k standardu SIST EN 60317-22:2005
This part of IEC 60317 specifies the requirements of enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. Class 180 is a thermal class that requires a minimum temperature index of 180 and a heat shock temperature of at least 200 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved.
The range of nominal conductor diameters covered by this standard is as follows:
– grade 1: 0,050 mm up to and including 3,150 mm;
– grade 2: 0,050 mm up to and including 5,000 mm;
– grade 3: 0,250 mm up to and including 1,600 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1.
- Status
- Published
- Publication Date
- 07-Oct-2010
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 26-Aug-2010
- Due Date
- 31-Oct-2010
- Completion Date
- 08-Oct-2010
SIST EN 60317-22:2005/A1:2010 is the Slovenian adoption of the European amendment EN 60317-22:2004/A1:2010 for polyester or polyesterimide enamelled round copper winding wire overcoated with polyamide, class 180. It is used by wire makers, test laboratories, equipment manufacturers, and buyers who need to specify the wire family, its thermal class, conductor size range, and the pin hole test reference. The amendment is applied together with the base wire specification for this product family.
What does SIST EN 60317-22:2005/A1:2010 specify?
SIST EN 60317-22:2005/A1:2010 specifies requirements for an enamelled round copper winding wire with a dual coating system. The underlying coating is based on polyester or polyesterimide resin, and the outer coating is based on polyamide resin.
The standard covers class 180 wire and ties that class to thermal performance, including a minimum temperature index of 180 and a heat shock temperature of at least 200 °C. It also sets the nominal conductor diameter ranges for grades 1, 2, and 3, with the size definitions taken from Clause 4 of IEC 60317-0-1.
This amendment text is centered on Clause 23, Pin hole test, and on the formal adoption notes in the foreword and endorsement notice. In practice, users apply the amendment with the parent standard for the full product specification.
What are the key requirements of SIST EN 60317-22:2005/A1:2010?
Coating system
SIST EN 60317-22:2005/A1:2010 requires a dual-coated winding wire: a polyester or polyesterimide enamel base layer, then a polyamide overcoat. The base resin may be modified if it keeps the chemical identity of the original resin and still meets all wire requirements.
For users, this means the product may use adjusted resin chemistry, but only within the same material family and only if the finished wire still passes the specified performance checks.
Thermal class 180
SIST EN 60317-22:2005/A1:2010 identifies the wire as class 180, which means a minimum temperature index of 180 and a heat shock temperature of at least 200 °C. The document also notes that the temperature index is not automatically the recommended operating temperature.
For procurement and design, this matters because the wire’s thermal rating has to fit the equipment’s actual operating conditions, not just the class label.
Conductor size range
SIST EN 60317-22:2005/A1:2010 covers these nominal conductor diameter ranges:
- grade 1: 0,050 mm to 3,150 mm
- grade 2: 0,050 mm to 5,000 mm
- grade 3: 0,250 mm to 1,600 mm
This helps users choose the correct wire size family before testing, winding, or ordering.
Pin hole test
SIST EN 60317-22:2005/A1:2010 updates Clause 23, Pin hole test, so that it refers users to Clause 23 of IEC 60317-0-1. That means the inspection method is taken from the general part rather than repeated in this amendment.
For laboratories, this supports a common test method across winding wire standards and avoids using a separate local procedure.
Use of the general part
SIST EN 60317-22:2005/A1:2010 relies on IEC 60317-0-1 for at least two key items: the nominal conductor diameters and the pin hole test. The amendment therefore sits within the IEC 60317 series rather than standing alone.
In practice, users need the general part alongside this product-specific part to interpret sizes and testing correctly.
What terms does SIST EN 60317-22:2005/A1:2010 define?
- Class 180 - the thermal class for this wire, requiring a minimum temperature index of 180 and a heat shock temperature of at least 200 °C.
- Temperature index - the temperature-related rating used to express the thermal endurance class of the wire.
- Heat shock temperature - the temperature level used to check whether the wire withstands sudden heat exposure.
- Modified resin - a resin that has undergone chemical change or contains additives to improve performance, while keeping the chemical identity of the original resin.
- Nominal conductor diameter - the specified wire size used for ordering and testing, with definitions taken from IEC 60317-0-1.
- Grade 1 / grade 2 / grade 3 - the diameter ranges that group the conductor sizes covered by the standard.
- Pin hole test - the insulation test used to check for pinholes in the enamel system.
Who uses SIST EN 60317-22:2005/A1:2010?
SIST EN 60317-22:2005/A1:2010 is used by manufacturers of winding wire, by test laboratories that check insulation quality, and by electrical equipment makers that specify wire for winding applications. Quality managers and buyers use it when they need a clear material type, thermal class, size range, and test reference for procurement or acceptance.
It is especially relevant where round copper winding wire must be selected, inspected, or certified against a named wire specification.
What changed in SIST EN 60317-22:2005/A1:2010 from the previous edition?
SIST EN 60317-22:2005/A1:2010 is an amendment to EN 60317-22:2004. The change stated in the amendment text is that Clause 23, Pin hole test, is replaced by a reference to Clause 23 of IEC 60317-0-1.
The endorsement notice also states that the IEC amendment was approved by CENELEC without modification.
Which standards are used with SIST EN 60317-22:2005/A1:2010?
- EN 60317-22:2004 - the base European standard that this amendment modifies.
- IEC 60317-22:2004/A1:2009 - the international amendment aligned with this European amendment.
- IEC 60317-0-1 - provides the nominal conductor diameters in Clause 4 and the pin hole test in Clause 23.
These companion standards provide the common size definitions and the shared test method needed to apply this wire specification correctly.
What does the SIST EN 60317-22:2005/A1:2010 document contain?
The document contains the European foreword, an endorsement notice, and the amendment text itself. The technical content shown in the amendment is focused on Clause 23, Pin hole test, which now points users to IEC 60317-0-1.
It also records the administrative adoption details for the amendment within CENELEC and identifies the relationship to the base standard. For users, the practical value is in how the amendment links the product-specific wire standard to the shared IEC test method.
Relations
- Effective Date
- 01-Nov-2010
Get Certified
Connect with accredited certification bodies for this standard
IMQ S.p.A. (Certification)
Italian electrical product certification.
SLG Prüf- und Zertifizierungs GmbH
German testing and certification body.
UL Solutions
Global safety science company with testing, inspection and certification.
Sponsored listings
Frequently Asked Questions
SIST EN 60317-22:2005/A1:2010 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 (IEC 60317-22:2004/A1:2009)". This standard covers: Amandma A1:2010 je dodatek k standardu SIST EN 60317-22:2005 This part of IEC 60317 specifies the requirements of enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. Class 180 is a thermal class that requires a minimum temperature index of 180 and a heat shock temperature of at least 200 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is as follows: – grade 1: 0,050 mm up to and including 3,150 mm; – grade 2: 0,050 mm up to and including 5,000 mm; – grade 3: 0,250 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1.
Amandma A1:2010 je dodatek k standardu SIST EN 60317-22:2005 This part of IEC 60317 specifies the requirements of enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide resin. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. Class 180 is a thermal class that requires a minimum temperature index of 180 and a heat shock temperature of at least 200 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor diameters covered by this standard is as follows: – grade 1: 0,050 mm up to and including 3,150 mm; – grade 2: 0,050 mm up to and including 5,000 mm; – grade 3: 0,250 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1.
SIST EN 60317-22:2005/A1:2010 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60317-22:2005/A1:2010 has the following relationships with other standards: It is inter standard links to SIST EN 60317-22:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60317-22:2005/A1:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2010
Specifikacije za posebne tipe navitij - 22. del: S poliestrom ali poliesterimidom
emajliran bakren okrogel vodnik, prekrit s poliamidom, razred 180 (IEC 60317-
22:2004/A1:2009)
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide
enamelled round copper wire overcoated with polyamide, class 180 (IEC 60317-
22:2004/A1:2009)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 22:
Runddrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit
Polyamid, Klasse 180 (IEC 60317-22:2004/A1:2009)
Spécifications pour types particuliers de fils de bobinage - Partie 22: Fil de section
circulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche
polyamide, classe 180 (CEI 60317-22:2004/A1:2009)
Ta slovenski standard je istoveten z: EN 60317-22:2004/A1:2010
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60317-22/A1
NORME EUROPÉENNE
February 2010
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 22: Polyester or polyesterimide enamelled round copper
wire overcoated with polyamide, class 180
(IEC 60317-22:2004/A1:2009)
Spécifications pour types particuliers Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 22: Fil de section circulaire Teil 22: Runddrähte aus Kupfer,
en cuivre émaillé avec polyester lackisoliert mit Polyester
ou polyesterimide et avec surcouche oder Polyesterimid und darüber
polyamide, classe 180 mit Polyamid, Klasse 180
(CEI 60317-22:2004/A1:2009) (IEC 60317-22:2004/A1:2009)
This amendment A1 modifies the European Standard EN 60317-22:2004; it was approved by CENELEC on
2010-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisati
...