SIST EN 60811-606:2012
Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
This Part 606 of IEC 60811 descries the methods for determining the density for the most common types of insulating and sheathing compounds (cross-linked, PVC, PE, PP, etc.).
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 606: Physikalische Prüfungen - Verfahren zur Bestimmung der Dichte
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 606: Essais physiques - Méthodes de détermination de la masse volumique
La CEI 60811-606:2012 décrit les méthodes de détermination de la masse volumique pour les types les plus courants de mélanges d'isolation et de gainage (réticulés, PVC, PVC, PE, PP, etc.). La CEI 60811-606:2012 annule et remplace l'Article 8 de la CEI 60811-1-3:1993, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012. Cette publication doit être lue conjointement avec la CEI 60811-100:2012.
Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 606. del: Fizični preskusi - Metode za ugotavljanje gostote
606. del standarda IEC 60811 navaja metode za ugotavljanje gostote za najbolj splošne tipe izolacijskih in oplaščevalnih spojin (zamreženih, PVC, PE, PP itd.).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 606: Physikalische Prüfungen - Verfahren zur Bestimmung der DichteCâbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 606: Essais physiques - Méthodes de détermination de la masse volumiqueElectric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density29.060.20KabliCables29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60811-606:2012SIST EN 60811-606:2012en,fr,de01-september-2012SIST EN 60811-606:2012SLOVENSKI
STANDARD
SIST EN 60811-606:2012
EUROPEAN STANDARD EN 60811-606 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-606:2012 E
ICS 29.035.01; 29.060.20 Supersedes EN 60811-1-3:1995 (partially) + A1:2001 (partially)
English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 606: Physical tests -
Methods for determining the density (IEC 60811-606:2012)
Câbles électriques et à fibres optiques -
Méthodes d'essai pour les matériaux non-métalliques -
Partie 606: Essais physiques -
Méthodes de détermination de la masse volumique (CEI 60811-606:2012)
Kabel, isolierte Leitungen und Glasfaserkabel -
Prüfverfahren für nichtmetallene Werkstoffe -
Teil 606: Physikalische Prüfungen -
Verfahren zur Bestimmung der Dichte (IEC 60811-606:2012)
This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 60811-606:2012
EN 60811-606:2012 - 2 -
Foreword The text of document 20/1315/FDIS, future edition 1 of IEC 60811-606, prepared by IEC/TC 20 "Electric cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60811-606:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-17 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-17
This document supersedes Clause 8 of EN 60811-1-3:1995 + A1:2001 (partially). Full details of the replacements are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-1-3:1995 + A1:2001, but see the Foreword to EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The text of the International Standard IEC 60811-606:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: ISO 1183 series NOTE
Harmonized in EN ISO 1183 series.
SIST EN 60811-606:2012
- 3 - EN 60811-606:2012
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials -
Part 100: General EN 60811-100 2012
SIST EN 60811-606:2012
SIST EN 60811-606:2012
IEC 60811-606 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables – Test methods for non-metallic materials –
Part 606: Physical tests – Methods for determining the density
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux non-métalliques –
Partie 606: Essais physiques – Méthodes de détermination de la masse volumique
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-999-7
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 60811-606:2012
– 2 – 60811-606 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Suspension method (general method) . 6 4.2.1 Testing materials and equipment . 6 4.2.2 Procedure . 7 4.3 Pycnometer method (reference method) . 7 4.3.1 Testing equipment . 7 4.3.2 Sample and test piece preparation . 7 4.3.3 Conditioning . 7 4.3.4 Procedure . 7 4.3.5 Calculation . 8 4.4 Apparent mass method . 8 4.4.1 Testing equipment . 8 4.4.2 Sampling and preparation of test pieces . 8 4.4.3 Conditioning . 8 4.4.4 Procedure . 8 4.4.5 Calculation . 8 4.5 Correction for filled polyethylene (PE) . 9 5 Test report. 9 Bibliography . 10
SIST EN 60811-606:2012
60811-606 IEC:2012 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –
Part 606: Physical tests –
Methods for determining the density
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.