SIST EN 16603-50-22:2022
(Main)Space engineering - Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link Protocol
Space engineering - Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link Protocol
In the standard CCSDS 132.0-B-2, TM Space Data Link Protocol, CCSDS specifies a data link layer protocol for the
efficient transfer of space application data of various types and characteristics over space links.
This Adoption Notice adopts and applies CCSDS 132.0-B-2 w ith a minimum set of modifications, identified in the present
document, to allow for reference and for a consistent integration in the ECSS system of standards.
The TM Transfer Frame specified in CCSDS 132.0-B-2 is similar to the TM Transfer Frame specified in the EN 16603-50-
03:2014 (ECSS-E-ST-50-03), that is superseded by the follow ing tw o Adoption Notices: EN 16603-50-22 (ECSS-E-AS-
50-22) and EN 16603-50-23 (ECSS-E-AS-50-23).
Differences betw een these tw o standards that are not covered by the normative modifications in clause 4 are described in
the informative Annex A.
Raumfahrttechnik - Adaption CCSDS 132.0-B-2, Telemetrie-Weltraum-Datenübertragungsprotokoll
Ingénierie spatiale - Notice d’adoption de la CCSDS 132.0-B-2, TM Space Data Link Protocol
Le présent document identifie les paragraphes et exigences modifiés par rapport à la norme CCSDS 132.0-B-2, TM Space Data Link Protocol, édition 2, septembre 2015 en vue d'une application dans le cadre de l'ECSS.
Vesoljska tehnika - Sprejem obvestila CCSDS 132.0-B-2, protokol vesoljske podatkovne povezave TM
V standardu CCSDS 132.0-B-2, Protokol vesoljske podatkovne povezave TM, komisija CCSDS določa protokol podatkovne povezovalne plasti za učinkovit prenos podatkov vesoljskih aplikacij različnih vrst in značilnosti prek vesoljskih povezav.
To obvestilo o sprejemu sprejema in uporablja standard CCSDS 132.0-B-2 z minimalnim naborom sprememb, ki so določene v tem dokumentu, da se omogočita sklicevanje in dosledna integracija sistema standardov ECSS.
Okvir prenosa TM, ki ga določa standard CCSDS 132.0-B-2, je podoben okvirju prenosa TM, določenemu v standardu EN 16603-50-03:2014 (ECSS-E-ST-50-03), ki ga nadomeščata naslednji dve obvestili o sprejemu: EN 16603-50-22 (ECSS-E-AS-50-22) in EN 16603-50-23 (ECSS-E-AS-50-23).
Razlike med tema dvema standardoma, ki niso zajete v normativnih spremembah v točki 4, so opisane v informativnem dodatku A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16603-50-22:2022
01-september-2022
Nadomešča:
SIST EN 16603-50-03:2015
Vesoljska tehnika - Sprejem obvestila CCSDS 132.0-B-2, protokol vesoljske
podatkovne povezave TM
Space engineering - Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link Protocol
Raumfahrttechnik - Adaption CCSDS 132.0-B-2, Telemetrie-Weltraum-
Datenübertragungsprotokoll
Ingénierie spatiale - Notice d’adoption de la CCSDS 132.0-B-2, TM Space Data Link
Protocol
Ta slovenski standard je istoveten z: EN 16603-50-22:2022
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16603-50-22:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16603-50-22:2022
---------------------- Page: 2 ----------------------
SIST EN 16603-50-22:2022
EUROPEAN STANDARD EN 16603-50-22
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2022
ICS 49.140
Supersedes EN 16603-50-03:2014
English version
Space engineering - Adoption Notice of CCSDS 132.0-B-2,
TM Space Data Link Protocol
Ingénierie spatiale - Notice d'adoption de la CCSDS Raumfahrttechnik - Adaption CCSDS 132.0-B-2,
132.0-B-2, TM Space Data Link Protocol Telemetrie-Weltraum-Datenübertragungsprotokoll
This European Standard was approved by CEN on 13 March 2022.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN 16603-50-22:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16603-50-22:2022
EN 16603-50-22:2022 (E)
Table of contents
European Foreword . 3
1 Scope . 4
2 Context information. 5
3 Abbreviated terms . 6
4 Application requirements . 7
Bibliography . 12
Tables
Table 4-1: Applicability table for CCSDS 132.0-B-2 . 7
2
---------------------- Page: 4 ----------------------
SIST EN 16603-50-22:2022
EN 16603-50-22:2022 (E)
European Foreword
This document (EN 16603-50-22:2022) has been prepared by Technical Committee CEN-
CENELEC/TC 5 “Space”, the secretariat of which is held by DIN.
This standard (EN 16603-50-22:2022) originates from ECSS-E-AS-50-22C.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
EN 16603-50-22 and EN 16603-50-23 will together supersede EN 16603-50-03:2014.
The main changes with respect to EN 16603-50-03:2014 are listed below:
- Replacement of document by two Adoption Notices.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association.
This document has been developed to cover specifically space systems and has therefore precedence
over any EN covering the same scope but with a wider domain of applicability (e.g. : aerospace).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 16603-50-22:2022
EN 16603-50-22:2022 (E)
1
Scope
This document identifies the clauses and requirements modified with respect to
the standard CCSDS 132.0-B-2, TM Space Data Link Protocol, Issue 2, September
2015, for application in ECSS.
4
---------------------- Page: 6 ----------------------
SIST EN 16603-50-22:2022
EN 16603-50-22:2022 (E)
2
Context information
In the standard CCSDS 132.0-B-2, TM Space Data Link Protocol, CCSDS specifies
a data link layer protocol for the efficient transfer of space application data of
various types and characteristics over space links.
This Adoption Notice adopts and applies CCSDS 132.0-B-2 with a minimum set
of modifications, identified in the present document, to allow for reference and
for a consistent integration in the ECSS system of standards.
The TM Transfer Frame specified in CCSDS 132.0-B-2 is similar to the TM
Transfer Frame specified in the EN 16603-50-03:2014 (ECSS-E-ST-50-03), that is
superseded by the following two Adoption Notices: EN 16603-50-22 (ECSS-E-
AS-50-22) and EN 16603-50-23 (ECSS-E-AS-50-23).
Differences between these two standards that are not covered by the normative
modifications in clause 4 are described in the informative Annex A.
Overview of superseded EN 16603-50-xx Standards
Superseded EN New EN Based on CCSDS
EN 16603-50-01:2014 EN 16603-50-21 CCSDS 131.0-B-3 (Sept. 2017)
EN 16603-50-03:2014 EN 16603-50-22 CCSDS 132.0-B-2 (Sept. 2015)
EN 16603-50-23 CCSDS 732.0-B-3 (Sept. 2015)
EN 16603-50-04:2014 EN 16603-50-24 CCSDS 231.0-B-3 (Sept. 2017)
EN 16603-50-25 CCSDS 232.0-B-3 (Sept. 2015)
EN 16603-50-26 CCSDS 232.1-B-2 (Sept. 2010)
5
---------------------- Page: 7 ----------------------
SIST EN 16603-50-22:2022
EN 16603-50-22:2022 (E)
3
Abbreviated terms
AOS Advanced Orbiting Systems
SDLS Space Data Link Security
6
---------------------- Page: 8 ----------------------
SIST EN 16603-50-22:2022
EN 16603-50-22:2022 (E
...
SLOVENSKI STANDARD
oSIST prEN 16603-50-22:2021
01-september-2021
Vesoljska tehnika - Sprejem obvestila CCSDS 132.0-B-2, protokol vesoljske
podatkovne povezave TM, številka 2, september 2015
Space engineering - Adoption Notice of CCSDS 132.0-B-2, TM Space Data Link
Protocol, Issue2, September 2015
Ta slovenski standard je istoveten z: prEN 16603-50-22
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
oSIST prEN 16603-50-22:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16603-50-22:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16603-50-22:2021
EUROPEAN STANDARD
DRAFT
prEN 16603-50-22
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 49.140
English version
Space engineering - Adoption Notice of CCSDS 132.0-B-2,
TM Space Data Link Protocol, Issue2, September 2015
Raumfahrttechnik - Adoption Notice von CCSDS 132.0-
B-2, TM Space Data Link Protocol, Ausgabe 2,
September 2015
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
If this draft becomes a European Standard, CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
This draft European Standard was established by CEN and CENELEC in three official versions (English, French, German). A
version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own
language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Recipients of this draft are invited to submit, with their comments, notification
of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
---------------------- Page: 3 ----------------------
oSIST prEN 16603-50-22:2021
prEN 16603-50-22:2021 (E)
Table of contents
European Foreword . 3
1 Scope . 4
2 Context information. 5
3 Abbreviated terms . 6
4 Application requirements . 7
Bibliography . 12
Tables
Table 4-1: Applicability table for CCSDS 132.0-B-2 . 7
2
---------------------- Page: 4 ----------------------
oSIST prEN 16603-50-22:2021
prEN 16603-50-22:2021 (E)
European Foreword
This document (prEN 16603-50-22:2021) has been prepared by Technical
Committee CEN/CLC/TC 5 “Space”, the secretariat of which is held by DIN
(Germany).
This document (prEN 16603-50-22:2021) originates from ECSS-E-AS-50-22C-
DIR1.
This document is currently submitted to the ENQUIRY.
EN 16603-50-22 and EN 16603-50-23 will together supersede EN 16603-50-
03:2014.
The main changes with respect to EN 16603-50-03:2014 are listed below:
- Replacement of document by two Adoption Notices.
This document has been developed to cover specifically space systems and will
therefore have precedence over any EN covering the same scope but with a
wider do-main of applicability (e.g. : aerospace).
3
---------------------- Page: 5 ----------------------
oSIST prEN 16603-50-22:2021
prEN 16603-50-22:2021 (E)
1
Scope
This document identifies the clauses and requirements modified with respect to
the standard CCSDS 132.0-B-2, TM Space Data Link Protocol, Issue 2, September
2015, for application in ECSS.
4
---------------------- Page: 6 ----------------------
oSIST prEN 16603-50-22:2021
prEN 16603-50-22:2021 (E)
2
Context information
In the standard CCSDS 132.0-B-2, TM Space Data Link Protocol, CCSDS specifies
a data link layer protocol for the efficient transfer of space application data of
various types and characteristics over space links.
This Adoption Notice adopts and applies CCSDS 132.0-B-2 with a minimum set
of modifications, identified in the present document, to allow for reference and
for a consistent integration in the ECSS system of standards.
The TM Transfer Frame specified in CCSDS 132.0-B-2 is similar to the TM
Transfer Frame specified in the EN 16603-50-03:2014 (ECSS-E-ST-50-03), that is
superseded by the following two Adoption Notices: EN 16603-50-22 (ECSS-E-
AS-50-22) and EN 16603-50-23 (ECSS-E-AS-50-23).
Differences between these two standards that are not covered by the normative
modifications in clause 4 are described in the informative Annex A.
Overview of superseded EN 16603-50-xx Standards
Superseded EN New EN Based on CCSDS
EN 16603-50-01:2014 EN 16603-50-21 CCSDS 131.0-B-3 (Sept. 2017)
EN 16603-50-03:2014 EN 16603-50-22 CCSDS 132.0-B-2 (Sept. 2015)
EN 16603-50-23 CCSDS 732.0-B-3 (August 2016)
EN 16603-50-04:2014 EN 16603-50-24 CCSDS 231.0-B-3 (Sept. 2017)
EN 16603-50-25 CCSDS 232.0-B-3 (Sept. 2015)
EN 16603-50-26 CCSDS 232.1-B-2 (Sept. 2010)
5
---------------------- Page: 7 ----------------------
oSIST prEN 16603-50-22:2021
prEN 16603-50-22:2021 (E)
3
Abbreviated terms
AOS Advanced Orbiting Systems
SDLS Space Data Link Security
6
---------------------- Page: 8 ----------------------
oSIST prEN 16603-50-22:2021
prEN 16603-50-22:2021 (E)
4
Application requirements
a. CCSDS 132.0-B-2, TM Space Data Link Protocol, Issue 2, September 2015 shall apply with the following modifications listed in Table 4-1.
Table 4-1: Applicability table for CCSDS 132.0-B-2
Clause or Applicability Applicable text Comments Text as in the original
requirement document
(the new/added text is underlined)
number
(deleted text with strikethrough)
4.1.3.1.7 New requirement The Transfer Frame Secondary Header may be used New requirement added:
to provide an extended virtua
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.