SIST EN 16603-20-08:2023
(Main)Space engineering - Photovoltaic assemblies and components
Space engineering - Photovoltaic assemblies and components
This Standard specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications.
This standard does not cover the particular qualification requirements for a specific mission.
This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items.
This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 m and does not include thin film solar cell technologies and poly-crystaline solar cells.
This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source).
This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms.
Raumfahrttechnik - Fotovoltaische Baugruppen und Komponenten
Ingéniérie spatiale - Ensembles et composants photovoltaïque
La présente norme spécifie les exigences générales pour la qualification, l'approvisionnement, le stockage et la livraison des ensembles photovoltaïques, ensembles de cellule solaire, cellules solaires brutes, couvertures en verre et diodes de protection adaptés aux applications spatiales.
La présente norme ne couvre pas les exigences de qualification particulières applicables à une mission spécifique.
La présente norme s'applique principalement à l'approbation de la qualification pour les ensembles photovoltaïques, ensembles de cellule solaire, cellules solaires brutes, couvertures en verre et diodes de protection, ainsi qu'à l'approvisionnement de ces éléments.
La présente norme est limitée aux cellules solaires en silicium cristallin et en GaAs mono-jonction et multi-jonction, avec une épaisseur supérieure à 50 m ; elle ne traite pas des technologies de cellule solaire à film mince et des cellules solaires polycristallines.
La présente norme ne traite pas des technologies de concentration, en particulier des exigences relatives aux composantes optiques d'un concentrateur (par exemple : réflecteur et lentille) et à leur vérification (par exemple : source de lumière collimatée).
La présente norme ne s'applique pas à la qualification des sous-systèmes du générateur solaire, des panneaux solaires, de la structure et des mécanismes du générateur solaire.
La présente norme peut être adaptée aux caractéristiques et contraintes spécifiques d'un projet spatial conformément à l'ECSS-S-ST-00.
La qualification est un processus qui permet de confirmer la conformité aux exigences établies en référence aux programmes d'essais de caractérisation et d'ingénierie ci-après. Les lignes directrices relatives aux essais de caractérisation et d'ingénierie et à l'assouplissement des essais de qualification en raison d'une similarité avec une qualification antérieure sont définies dans le manuel ECSS-E-HB-20-08. Les articles de la présente norme, pour lesquels le manuel donne des informations supplémentaires, font référence au manuel.
Vesoljska tehnika - Fotonapetostni sestavi in komponente
Ta standard določa splošne zahteve za ustreznost, naročanje, shranjevanje in dobavo fotonapetostnih sestavov, sestavov sončnih celic, posameznih sončnih celic, zaščitnih stekel in diod, primernih za vesoljske aplikacije.
Ta standard ne zajema posebnih zahtev ustreznosti za določeno misijo.
Ta standard se uporablja predvsem za odobritev ustreznosti fotonapetostnih sestavov, sestavov sončnih celic, posameznih sončnih celic, zaščitnih stekel in diod ter za naročanje teh elementov.
Standard zajema le sončne celice iz kristalnega silicija in enojne ter večspojne sončne celice GaAs debeline več kot 50 m, ne zajema pa tehnologij sončnih celic s tankimi filmi in polikristalnih sončnih celic.
Standard ne zajema koncentracijske tehnologije, in še zlasti zahtev, povezanih z optičnimi komponentami koncentratorja (npr. reflektor in leča) in preverjanja njihove ustreznosti (npr. kolimiran vir svetlobe).
Ta standard ne velja za ustreznost podsistemov sončnih sistemov, sončne kolektorje in strukturo ter mehanizme sončnih sistemov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16603-20-08:2023
01-december-2023
Vesoljska tehnika - Fotonapetostni sestavi in komponente
Space engineering - Photovoltaic assemblies and components
Raumfahrttechnik - Fotovoltaische Baugruppen und Komponenten
Ingéniérie spatiale - Ensembles et composants photovoltaïque
Ta slovenski standard je istoveten z: EN 16603-20-08:2023
ICS:
27.160 Sončna energija Solar energy engineering
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16603-20-08:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16603-20-08:2023
---------------------- Page: 2 ----------------------
SIST EN 16603-20-08:2023
EUROPEAN STANDARD EN 16603-20-08
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2023
ICS 49.140
Supersedes EN 16603-20-08:2014
English version
Space engineering - Photovoltaic assemblies and
components
Ingéniérie spatiale - Ensembles et composants Raumfahrttechnik - Fotovoltaische Baugruppen und
photovoltaïques Komponenten
This European Standard was approved by CEN on 23 July 2023.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2023 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN 16603-20-08:2023 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16603-20-08:2023
EN 16603-20-08:2023 (E)
Table of contents
European foreword . 12
Introduction . 13
1 Scope . 14
2 Normative references . 15
3 Terms, definitions and abbreviated terms . 17
3.1 Terms from other standards . 17
3.2 Terms specific to the present standard . 17
3.3 Abbreviated terms . 22
3.4 Nomenclature . 25
4 General . 26
4.1 Overview . 26
4.1.1 Objective and organization . 26
4.1.2 Interfaces with other areas . 28
4.2 Physical properties . 29
4.3 Test and storage . 29
4.3.1 Test environment . 29
4.3.2 Test tolerances and accuracies . 30
4.3.3 <> . 31
4.4 Critical materials . 31
5 Photovoltaic assemblies . 32
...
SLOVENSKI STANDARD
oSIST prEN 16603-20-08:2022
01-oktober-2022
Vesoljska tehnika - Fotonapetostni sestavi in komponente
Space engineering - Photovoltaic assemblies and components
Raumfahrttechnik - Fotovoltaische Baugruppen und Komponenten
Ingéniérie spatiale - Ensembles et composants photovoltaïque
Ta slovenski standard je istoveten z: prEN 16603-20-08
ICS:
27.160 Sončna energija Solar energy engineering
49.140 Vesoljski sistemi in operacije Space systems and
operations
oSIST prEN 16603-20-08:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16603-20-08:2022
---------------------- Page: 2 ----------------------
oSIST prEN 16603-20-08:2022
EUROPEAN STANDARD DRAFT
prEN 16603-20-08
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2022
ICS 49.140
Will supersede EN 16603-20-08:2014
English version
Space engineering - Photovoltaic assemblies and
components
Ingéniérie spatiale - Ensembles et composants Raumfahrttechnik - Fotovoltaische Baugruppen und
photovoltaïque Komponenten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
If this draft becomes a European Standard, CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
This draft European Standard was established by CEN and CENELEC in three official versions (English, French, German). A
version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language
and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Recipients of this draft are invited to submit, with their comments, notification
of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. prEN 16603-20-08:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16603-20-08:2022
prEN 16603-20-08:2022 (E)
Table of contents
European Foreword . 12
Introduction . 13
1 Scope . 14
2 Normative references . 15
3 Terms, definitions and abbreviated terms . 16
3.1 Terms from other standards . 16
3.2 Terms specific to the present standard . 16
3.3 Abbreviated terms . 21
3.4 Nomenclature . 24
4 General . 25
4.1 Overview . 25
4.1.1 Objective and organization . 25
4.1.2 Interfaces with other areas . 27
4.2 Physical properties . 28
4.3 Test and storage . 28
4.3.1 Test env
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.