Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16) (IEC 62386-217:2018)

This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear that implements thermal gear protection.
NOTE Requirements for testing individual products during production are not included.

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 217: Besondere Anforderungen für Betriebsgeräte - Thermischer Betriebsgeräteschutz (Gerätetyp 16)

Interface d’éclairage adressable numérique - Partie 217: Exigences particulières pour les appareillages de commande - Protection thermique de l'appareillage (dispositifs de type 16)

L’IEC 62386-217:2018 spécifie un système à bus pour la commande par des signaux numériques des appareils d'éclairage électroniques conformes aux exigences de l'IEC 61347 (toutes les parties), en ajoutant les alimentations en courant continu.

Digitalni naslovljivi vmesnik za razsvetljavo - 217. del: Posebne zahteve za krmilja - Toplotni ščitniki (naprava tipa 16) (IEC 62386-217:2018)

Ta del standarda IEC 62386 določa sistem vodil za krmiljenje elektronske opreme za razsvetljavo z digitalnimi signali, ki je v skladu z zahtevami standarda IEC 61347 (vsi deli), z dodatkom DC napajalnih enot.
Ta dokument se uporablja samo s standardi IEC 62386-102:2014 in IEC 62386-102:2014/AMD1: – krmilja, ki imajo toplotne ščitnike.
OPOMBA Zahteve za preskušanje posameznih proizvodov med proizvodnjo niso vključene.

General Information

Status
Published
Publication Date
03-Jun-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-May-2018
Due Date
29-Jul-2018
Completion Date
04-Jun-2018

Buy Standard

Standard
SIST EN IEC 62386-217:2018 - BARVE na PDF-str 11,16
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16) (IEC 62386-217:2018)35.200Vmesniška in povezovalna opremaInterface and interconnection equipment29.140.50Instalacijski sistemi za razsvetljavoLighting installation systemsICS:Ta slovenski standard je istoveten z:EN IEC 62386-217:2018SIST EN IEC 62386-217:2018en01-julij-2018SIST EN IEC 62386-217:2018SLOVENSKI

STANDARD
SIST EN IEC 62386-217:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 62386-217
May 2018 ICS 29.140.50; 29.140.99
English Version

Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16) (IEC 62386-217:2018)

Interface d'éclairage adressable numérique - Partie 217: Exigences particulières pour les appareillages de commande - Protection thermique de l'appareillage (dispositifs de type 16) (IEC 62386-217:2018)

Digital adressierbare Schnittstelle für die Beleuchtung - Teil 217: Besondere Anforderungen für Betriebsgeräte - Thermischer Betriebsgeräteschutz (Gerätetyp 16) (IEC 62386-217:2018) This European Standard was approved by CENELEC on 2018-04-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization

Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,

B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 62386-217:2018 E SIST EN IEC 62386-217:2018
EN IEC 62386-217:2018 (E)

European foreword The text of document 34/481/FDIS, future edition 1 of IEC 62386-217, prepared by IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62386-217:2018.

The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-01-26 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-04-26

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice The text of the International Standard IEC 62386-217:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61347 (all parts) NOTE Harmonized as EN 61347 (all parts). IEC 61347-1 NOTE Harmonized as EN 61347-1.

SIST EN IEC 62386-217:2018
EN IEC 62386-217:2018 (E)
3 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1

Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

NOTE 2

Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62386-101 + A11 2014

Digital addressable lighting interface - Part 101: General requirements - System components EN 62386-101 2014

IEC 62386-102 + A12 2014

Digital addressable lighting interface - Part 102: General requirements - Control gear EN 62386-102 2014

1 Under preparation. Stage at the time of publication: IEC CCDV 62386-101/AMD1:2018. 2 Under preparation. Stage at the time of publication: IEC CCDV 62386-102/AMD1:2018. SIST EN IEC 62386-217:2018

SIST EN IEC 62386-217:2018

IEC 62386-217 Edition 1.0 2018-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface –

Part 217: Particular requirements for control gear – Thermal gear protection (device type 16)

Interface d’éclairage adressable numérique –

Partie 217: Exigences particulières pour les appareillages de commande – Protection thermique de l'appareillage (dispositifs de type 16)

INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE

ICS 29.140.50; 29.140.99
ISBN 978-2-8322-5501-8
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN IEC 62386-217:2018 colourinside

– 2 – IEC 62386-217:2018 © IEC 2018 CONTENTS FOREWORD ........................................................................................................................... 3 INTRODUCTION ..................................................................................................................... 5 1 Scope .............................................................................................................................. 7 2 Normative references ...................................................................................................... 7 3 Terms and definitions ...................................................................................................... 7 4 General ........................................................................................................................... 8 4.1 General ................................................................................................................... 8 4.2 Version number ...................................................................................................... 8 5 Electrical specification ..................................................................................................... 8 6 Interface power supply .................................................................................................... 8 7 Transmission protocol structure ....................................................................................... 8 8 Timing ............................................................................................................................. 8 9 Method of operation ......................................................................................................... 8 9.1 General ................................................................................................................... 8 9.2 Thermal gear behaviour .......................................................................................... 8 9.3 Thermal gear overload .......................................................................................... 10 9.4 Thermal gear shutdown......................................................................................... 10 9.5 Failure status ........................................................................................................ 11 10 Declaration of variables ................................................................................................. 12 11 Definition of commands ................................................................................................. 12 11.1 General ................................................................................................................. 12 11.2 Overview sheets ................................................................................................... 12 11.3 Application extended commands ........................................................................... 13 11.3.1 General ......................................................................................................... 13 11.3.2 Configuration instructions .............................................................................. 13 11.3.3 Queries.......................................................................................................... 13 11.4 Special commands ................................................................................................ 14 11.4.1 General ......................................................................................................... 14 11.4.2 ENABLE DEVICE TYPE (data) ....................................................................... 14 Bibliography .......................................................................................................................... 15

Figure 1 – IEC 62386 graphical overview ................................................................................ 5 Figure 2 – Thermal gear protection state diagram ................................................................... 9 Figure 3 – Example of temperature change over time ........................................................... 10

Table 1 – Control gear failure status ..................................................................................... 11 Table 2 – Declaration of variables ......................................................................................... 12 Table 3 – Application extended commands for this device type ............................................. 13

SIST EN IEC 62386-217:2018
IEC 62386-217:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 217: Particular requirements for control gear –
Thermal gear protection (device type 16)

FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-217 has been prepared by IEC technical committee 34: Lamps and related equipment. The text of this International Standard is based on the following documents: FDIS Report on voting 34/481/FDIS 34/505/RVD

Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

SIST EN IEC 62386-217:2018

– 4 – IEC 62386-217:2018 © IEC 2018 This Part 217 of IEC 62386 is intended to be used in conjunction with: • Part 101, which contains general requirements for system components; • Part 102, which contains general requirements for control gear. A list of all parts in the IEC 62386 series, published under the general title: Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific document. At this date, the document will be • reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.

IMPORTANT – The 'colour inside' logo on the cover page of this document indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer.

SIST EN IEC 62386-217:2018
IEC 62386-217:2018 © IEC 2018 – 5 –

INTRODUCTION IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic specifications. Part 101 contains general requirements for system components, Part 102 extends this information with general requirements for contr

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.