SIST EN IEC 62386-305:2023
(Main)Digital addressable lighting interface - Part 305: Particular requirements - Input devices - Colour sensor (IEC 62386-305:2023)
Digital addressable lighting interface - Part 305: Particular requirements - Input devices - Colour sensor (IEC 62386-305:2023)
IEC 62386-305:2023 is applicable to input devices that provide the lighting control system with colour information by colour sensing.
This document is only applicable to IEC 62386-103 input devices that deliver colour information to the lighting control system through colour sensing.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 305: Besondere Anforderungen - Eingabegeräte - Farbsensor (IEC 62386-305:2023)
Interface d'éclairage adressable numérique - Partie 305: Exigences particulières - Dispositifs d'entrée - Capteur de couleur (IEC 62386-305:2023)
L'IEC 62386-305:2023 s’applique aux dispositifs d’entrée qui assurent le système de commande de l’éclairage avec des informations de couleurs fournies par des capteurs de couleur.
Le présent document s'applique uniquement aux dispositifs d'entrée de l'IEC 62386-103 qui fournissent des informations de couleurs au système de commande de l'éclairage par détection des couleurs.
Digitalni naslovljivi vmesnik za razsvetljavo - 305. del: Posebne zahteve - Vhodne naprave - Barvni senzor (IEC 62386-305:2023)
Ta del standarda IEC 62386 se uporablja za vhodne naprave, ki sistemu za krmiljenje razsvetljave zagotavljajo informacije o barvah z zaznavanjem barv.
Ta dokument se uporablja samo za vhodne naprave iz standarda IEC 62386-103, ki sistemu za krmiljenje razsvetljave zagotavljajo informacije o barvah z zaznavanjem barv.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2023
Digitalni naslovljivi vmesnik za razsvetljavo - 305. del: Posebne zahteve - Vhodne
naprave - Barvni senzor (IEC 62386-305:2023)
Digital addressable lighting interface - Part 305: Particular requirements - Input devices -
Colour sensor (IEC 62386-305:2023)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 305: Besondere
Anforderungen - Eingabegeräte - Farbsensor (IEC 62386-305:2023)
Interface d'éclairage adressable numérique - Partie 305: Exigences particulières -
Dispositifs d'entrée - Capteur de couleur (IEC 62386-305:2023)
Ta slovenski standard je istoveten z: EN IEC 62386-305:2023
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62386-305
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2023
ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 305: Particular
requirements - Input devices - Colour sensor
(IEC 62386-305:2023)
Interface d'éclairage adressable numérique - Partie 305: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières - Dispositifs d'entrée - Capteur de 305: Besondere Anforderungen - Eingabegeräte -
couleur Farbsensor
(IEC 62386-305:2023) (IEC 62386-305:2023)
This European Standard was approved by CENELEC on 2023-10-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-305:2023 E
European foreword
The text of document 34/1065/FDIS, future edition 1 of IEC 62386-305, prepared by IEC/TC 34
"Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-07-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-10-20
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62386-305:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61347 (series) NOTE Approved as EN 61347 (series)
IEC 61347-1 NOTE Approved as EN 61347-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2022 Digital addressable lighting interface - Part EN IEC 62386-101 2022
101: General requirements - System
components
IEC 62386-103 2022 Digital addressable lighting interface - Part EN IEC 62386-103 2022
103: General requirements - Control
devices
IEC 62386-333 - Digital addressable lighting interface - Part EN IEC 62386-333 -
333: Particular requirements for control
devices - Manual configuration (feature
type 33)
IEC 62386-305 ®
Edition 1.0 2023-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 305: Particular requirements – Input devices – Colour sensor
Interface d'éclairage adressable numérique –
Partie 305: Exigences particulières – Dispositifs d'entrée – Capteur de couleur
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50, 29.140.99 ISBN 978-2-8322-7474-3
– 2 – IEC 62386-305:2023 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General . 9
4.1 General requirements . 9
4.2 Version number . 9
4.3 Insulation . 9
5 Electrical specification . 9
6 Bus power supply . 9
7 Transmission protocol structure . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Instance type . 9
9.3 Input signal and value . 10
9.3.1 General . 10
9.3.2 Input value encoding . 10
9.4 Events . 10
9.4.1 Priority use . 10
9.4.2 Bus usage . 10
9.4.3 Encoding . 10
9.4.4 Event configuration . 11
9.4.5 Event generation . 12
9.5 Configuring the input device . 12
9.5.1 Using the report timer . 12
9.5.2 Using the deadtime timer . 13
9.5.3 Setting the timers . 13
9.5.4 Setting the hysteresis . 14
9.5.5 Manual configuration . 14
9.6 Exception handling. 14
9.6.1 Physical sensor failure . 14
9.6.2 Manufacturer-specific errors . 14
9.6.3 Error value . 15
10 Declaration of variables . 15
11 Definition of commands . 16
11.1 General . 16
11.2 Overview sheets . 16
11.2.1 General . 16
11.2.2 Standard commands . 17
11.3 Event messages . 17
11.3.1 INPUT NOTIFICATION (device/instance, event) . 17
11.3.2 POWER NOTIFICATION (device) . 17
11.4 Device control instructions . 17
11.5 Device configuration instructions . 17
IEC 62386-305:2023 © IEC 2023 – 3 –
11.6 Device queries . 17
11.7 Instance control instructions . 17
11.8 Instance configuration instructions . 17
11.8.1 General . 17
11.8.2 SET EVENT FILTER (DTR0) . 18
11.8.3 SET REPORT TIMER (DTR0) . 18
11.8.4 SET HYSTERESIS (DTR0) . 18
11.8.5 SET DEADTIME TIMER (DTR0) . 18
11.8.6 SET HYSTERESIS MIN (DTR0). 18
11.9 Instance queries . 18
11.9.1 General . 18
11.9.2 QUERY COLOUR SENSOR (DTR0) . 18
11.9.3 QUERY DEADTIME TIMER . 19
11.9.4 QUERY INSTANCE ERROR . 19
11.9.5 QUERY REPORT TIMER . 19
11.9.6 QUERY HYSTERESIS . 20
11.9.7 QUERY HYSTERESIS MIN . 20
11.10 Special commands . 20
Annex A (informative) Explanation of radiometric parameters of colour sensors . 21
Bibliography . 23
Figure 1 – IEC 62386 graphical overview . 6
Figure A.1 – Example sensor sensitivity . 21
Table 1 – Input value encoding . 10
Table 2 – Colour value events. 11
Table 3 – Colour report . 11
Table 4 – Event filter . 11
Table 5 – Event timer setting . 13
Table 6 – "manualCapabilityInstance3xx" values . 14
Table 7 – "instanceErrorByte" values . 15
Table 8 – Declaration of device variables . 15
Table 9 – Restrictions to instance variables defined in IEC 62386-103:2022 . 16
Table 10 – Declaration of instance variables . 16
Table 11 – Standard commands . 17
Table 12 – DTR reference . 19
Table A.1 – Example answers to QUERY COLOUR SENSOR (DTR0) . 22
– 4 – IEC 62386-305:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 305: Particular requirements –
Input devices – Colour sensor
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 62386-305 has been prepared by IEC technical committee 34: Lighting. It is an International
Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
34/1065/FDIS 34/1080/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
IEC 62386-305:2023 © IEC 2023 – 5 –
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
This document is intended to be used in conjunction with:
• IEC 62386-101, which contains general requirements for system components;
• IEC 62386-103, which contains general requirements for control devices.
A list of all parts in the IEC 62386 series, published under the general title Digital addressable
lighting interface, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
– 6 – IEC 62386-305:2023 © IEC 2023
INTRODUCTION
The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting
equipment and contains several parts, referred to as series. The IEC 62386-1xx series includes
the basic specifications. IEC 62386-101 contains general requirements for system components,
IEC 62386-102 extends this information with general requirements for control gear and
IEC 62386-103 extends it further with general requirements for control devices. IEC 62386-104
and IEC 62386-105 can be applied to control gear or control devices. IEC 62386-104 gives
requirements for wireless and alternative wired system components. IEC 62386-105 describes
firmware transfer. IEC 62386-150 gives requirements for an auxiliary power supply which can
be stand-alone, or built into control gear or control devices.
The IEC 62386-2xx series extends the general requirements for control gear with lamp specific
extensions (mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear
specific features.
The IEC 62386-3xx series extends the general requirements for control devices with input
device specific extensions describing the instance types as well as some common features that
can be combined with multiple instance types.
This first edition of IEC 62386-305 is intended to be used in conjunction with IEC 62386-101,
and IEC 62386-103. The division into separately published parts provides for ease of future
amendments and revisions. Additional requirements will be added as and when a need for them
is recognized.
The setup of the standards is graphically represented in Figure 1 below.
Figure 1 – IEC 62386 graphical overview
When this part of IEC 62386 refers to any of the clauses of the IEC 62386‑1xx series, the extent
to which such a clause is applicable is specified. The other parts also include additional
requirements, as necessary.
All numbers used in this document are decimal numbers unless otherwise noted. Hexadecimal
numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the
format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; "x" in binary numbers
means "don't care".
IEC 62386-305:2023 © IEC 2023 – 7 –
The following typographic expressions are used:
Variables: "variableName" or "variableName[3:0]", giving only bits 3 to 0 of "variableName";
Range of values: [lowest, highest];
Command: "COMMAND NAME".
– 8 – IEC 62386-305:2023 © IEC 2023
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 305: Particular requirements –
Input devices – Colour sensor
1 Scope
This part of IEC 62386 is applicable to input devices that provide the lighting control system
with colour information by colour sensing.
This document is only applicable to IEC 62386-103 input devices that deliver colour information
to the lighting control system through colour sensing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...